• Journal of Korean Society of Forest Science
• /
• v.100 no.2
• /
• pp.292-304
• /
• 2011

The purpose of this study is to draw institutional implications for tree cutting permit system improvement in comparison with Korea and foreign countries (German, Japan). A survey about recognition of cutting system and cutting-invigorating factors for two groups in charge of work for cutting permit (forest-official) and cutting operation (forest owner, tree butcher, forestry association, and forestry corporation) was carried out. The survey provides basic information which is necessary to improve current cutting system. The result of analysis about both German and Japan's cutting system show that clear cutting area to hinder function of forests tends to decrease and flexible final age of maturity considering condition of regional forest not uniform cutting age were applied. As a result of German and Japan's cutting system review flexible cutting system on regional characteristics is used to manage for the purpose of forest regeneration. The survey result about awareness and invigorating factors of cutting system represents that only public official group said final age of pine tree (3.13) and cedar (3.05) was proper and final age of other species of trees should have shortened. In matters of cutover area, current standard is less than 5ha per a felling area and the largest total area limit is 30 ha, only tree butcher, forestry corporation said cutover area must expand. Invigorating factors of current cutting system are reinforcement of cutover area, facility support, enrichment of technical training, increase of equipment support, simplification of administrative procedures, and provision of various benefits. The reinforcement of technical training among them especially represents the statistical significance of the participants' differential recognition.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.27-39
• /
• 2011

The study on Musan twelve peaks of Yongho garden in Jinju, Gyeongnam was anticipated to provide data and implication for reproducing similar spaces and modern changes in terms of design factor since it is the prototype of traditional mount for overcoming monotonous geographical features and intriguing changes and interests. The study analyzed and interpreted the symbolism of twelve peaks, principles of space composition and function and effect of visual construction that were pursued by the builder in terms of landscape view, which results are as following. The center of Yongho garden, Yonghoji(龍虎池) is a typical man-made pond for a supportive feng shui feature. It is a supporting equipment to complete the state of feng shui, and the result of strengthening the completion through the connection with the dragon-related name of the place. The shape of Musan twelve peaks looks like an oval form of Geumseongsan(金星山), 2~3.5m in height and 6~12m in diameter. Peaks are estimated as 1.5~3.7m(2.4m in average) in height, $35{\sim}138m^2$($73.4m^2$ in average) in area, and $30.7{\sim}115.0m^3$($62.5m^3$ in average) in volume. Given that Yonghojeong(龍虎亭), Soseon(小船), the site of main building and Yongsanjae(龍山齋) stand in line, Yonghoji was presumed as the state of enlightenment through ascribing the meaning to virtue and secularity. For the intention of realizing Musan twelve peaks, the builder probably had mounted twelve peaks forming the body of dragons with crossing the point corresponding to a head of tiger, and located Musan twelve peaks and Yonghojeong with a representation of dragons holding Cintamani rising into the sky in the center. The middle area near Musan twelve peaks surrounded by peaks like Geumseongsan running north and south shows a multi-structure of multilayer, maintaining the similarity centering on Yonghoji. It is considered the intention of mount planned at the time of Musan twelve peaks construction, caused by similar form harmony. Internalization of progressive realization through concealment and exposure, enframement effect and spatial order like prospect-refuge theory in the mount of Musan twelve peaks is considered the reflection of the intention to increase depth of the view and expectancy through the various degree of exposure and surroundings of each peak and the colorful combination of viewing and shutting. The "closed view" by Musan twelve peaks creates interesting, vivid and attractive recognition of the view, which is more effective in bringing depth of the view and interests in terms of the geographical design, particularly the area around Yonghoji. Moreover, it was identified that the combination of peaks can be formed resulted from the view configuration concerning the location through multilayer effect reveals an island through the other one when viewed from Yonghojeong.

• Journal of agriculture & life science
• /
• v.53 no.1
• /
• pp.117-126
• /
• 2019

This paper presents an experiment to examine the possibility of treating carcass while making compost with a horizontal cylinder composting equipment. The findings were as follows: as for heavy metal content, zinc content was above the allowed level in some measuring sections of the general operation and the entire measuring sections of the carcass operation, whose copper content was higher than the general operation. The wood chip operation was lower than the allowed level in all the heavy metals and similar or the same as the carcass operation in copper, cadmium and arsenic. Its nickel content was 29.5~63.8%, which was relatively higher than 9.3~18.0% and 15.8~18.0% of the general and carcass operation, respectively. Its chrome content was 14.2~31.9%, which was relatively higher than that of the general and carcass operation. The integrated operation was lower than the allowed level in all the heavy metals. Its copper and zinc content was 34.9~54.5% and 53.1~75.9%, which was similar to 48.9~52.6% and 64.6~85.9%, respectively, in the wood chip operation. Its chrome and nickel content was stabilized while their content was rather high in the wood chip operation. The average and final moisture content of the carcass operation was 60.7% and 49.6%, respectively. Its average moisture content was a little bit higher than the recommended level of 55.0%, but its final moisture content was lower than the recommended level. The average and final moisture content of the integrated operation was 29.2% and 18.6%, respectively, which was the lowest level among the four operation modes. The overall moisture content of the operation modes was under the recommended level of 55.0% with some variance among the modes. The C/N ratio was the lowest in the carcass operation and the highest in the general operation. The average C/N ratio of the operation modes was in the range of 13.7~20.3 with the total average of 18.3, and the modes kept it under the proper level of 30.0.

• The Journal of Engineering Geology
• /
• v.30 no.4
• /
• pp.457-468
• /
• 2020

Problems arising during pile design works for plant construction, civil and architecture work are mostly come from uncertainty of geotechnical characteristics. In particular, obtaining the N-value measured through the Standard Penetration Test (SPT) is the most important data. However, it is difficult to obtain N-value by drilling investigation throughout the all target area. There are many constraints such as licensing, time, cost, equipment access and residential complaints etc. it is impossible to obtain geotechnical characteristics through drilling investigation within a short bidding period in overseas. The geotechnical characteristics at non-drilling investigation points are usually determined by the engineer's empirical judgment, which can leads to errors in pile design and quantity calculation causing construction delay and cost increase. It would be possible to overcome this problem if N-value could be predicted at the non-drilling investigation points using limited minimum drilling investigation data. This study was conducted to predicted the N-value using an Artificial Neural Network (ANN) which one of the Artificial intelligence (AI) method. An Artificial Neural Network treats a limited amount of geotechnical characteristics as a biological logic process, providing more reliable results for input variables. The purpose of this study is to predict N-value at the non-drilling investigation points through patterns which is studied by multi-layer perceptron and error back-propagation algorithms using the minimum geotechnical data. It has been reviewed the reliability of the values that predicted by AI method compared to the measured values, and we were able to confirm the high reliability as a result. To solving geotechnical uncertainty, we will perform sensitivity analysis of input variables to increase learning effect in next steps and it may need some technical update of program. We hope that our study will be helpful to design works in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1556-1566
• /
• 2020

The purpose of this study was to investigate the effect of Nurida-Ball exercise on isokinetic muscle function, spinal alignment, and dynamic balance capacity in middle-aged men. All middle-aged men(n=16) were divided into 2 groups: Ball exercise(BE, n=8) and control(CON, n=8) group. BE group performed the Nurida-Ball exercise(30 min/day, 3 days/week, 8 weeks) and isokinetic knee and trunk muscle function, spinal alignment, and dynamic balance capacity were measured. All of the measured variables calculated the mean and standard deviation and verified normality using the Shapiro-Wilk test. The independent t-test method and the Paired t-test method were then analyzed to identify differences between groups. This study found that isokinetic knee and trunk muscle function was significantly strengthened in the BE compared with CON group by increasing peak torque(PT) of right and left knee extension(60°/sec, p<0.01, respectively), average power(AP) of right and left knee extension(60°/sec, p<0.05, p<0.01, respectively), and PT of right knee flexion(180°/sec, p<0.05) and AP of right knee extension(180°/sec, p<0.05). In the change of isokinetic trunk muscle function, only PT of trunk extension(180°/sec) was increased in the BE compared with the CON group(p<0.05). In addition, Nurida-ball exercise can improve the spinal alignment by reducing the trunk inclination(p<0.05) in the BE compared with the CON group. Finally, dynamic balance capacity was also enhanced in the BE compared with the CON group by decreasing the score of overall balance index(OBI, p<0.01) and Antero-posterior balance index(p<0.05) in the Stage-6, and OBI(p<0.05) in the Stage-1. This result demonstrated that Nurida-ball exercise may improve spinal alignment, dynamic balance capacity, and isokinetic muscle function, which might be an effective way for the improvement of health-related fitness in middle-aged men.

• Journal of Korea Water Resources Association
• /
• v.54 no.11
• /
• pp.903-913
• /
• 2021

In the flood season, the measurement of the river discharge has many restrictions due to reasons such as budget, manpower, safety, convenience in measurement and so on. In particular, when heavy rain events occur due to typhoons, etc., it is difficult to measure the amount of flood due to the above problems. In order to improve this problem, in this study, a method was developed that can measure the river discharge in a flood season simply and safely in a short time with minimal manpower by combining the functions of a drone and a surface velocity doppler radar. To overcome the mechanical limitations of drones caused by weather issues such as wind and rainfall derived from the measurement of the river discharge using the conventional drone, we developed a drone with P56 grade dustproof and waterproof performance, stable flight capability at a wind speed of up to 36 km/h, and a payload weight of up to 10 kg. Further, to eliminate vibration which is the most important constraint factor in the measurement with a surface velocity doppler radar, a damper plate was developed as a device that combines a drone and a surface velocity Doppler radar. The velocity meter DSVM (Dron and Surface Veloctity Meter using doppler radar) that combines the flight equipment with the velocity meter was produced. The error of ±3.5% occurred as a result of measuring the river discharge using DSVM at the point of Geumsan-gun (Hwangpunggyo) located at Bonghwang stream (the first tributary stream of the Geum River). In addition, when calculating the mean velocity from the measured surface velocity, the measurement was performed using ADCP simultaneously to improve accuracy, and the mean velocity conversion factor (0.92) was calculated by comparing the mean velocity. In this study, the discharge measured by combining a drone and a surface velocity meter was compared with the discharge measured using ADCP and floats, so that the application and utility of DSVM was confirmed.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2022

The aim of this study is to establish a new QC method that can simultaneously evaluate the resolution of the x/y plane and the z-axis by producing a phantom that can reflect exposure and reconstruction parameter of MDCT system. It was used with Aquilion ONE(Cannon Medical System, Otawara, Japan), and the examination was scanned using of 120 kV, 260 mA, and the D-FOV of 300 mm². It produced new SSP phantom modules in which two aluminum plates inclined at 45° to a vertical axis and a transverse axis to evaluate high contrast resolution of x/y plane and z axis. And it changed factors such as the algorithm, distance from gantry iso-center. All images were reconstructed in five steps from 0.6 mm to 10.0 mm slice thickness to measure resolution of x/y plane and z-axis. The image data measured FWHM and FWTM using Profile tool of Aquarius iNtusion Edition ver. 4.4.13 P6 software(Terarecon, California, USA), and analysed SPQI and signal intensity by ImageJ program(v1.53n, National Institutes of Health, USA). It decreased by 4.09~11.99%, 4.12~35.52%, and 4.70~37.64% in slice thickness of 2.5 mm, 5.0 mm, and 10.0 mm for evaluating the high contrast resolution of x/y plane according to distance from gantry iso-center. Therefore, the high contrast resolution of the x/y plane decreased when the distance from the iso-center increased or the slice thickness increased. Additionally, the slice thicknesses of 2.5 mm, 5.0 mm, and 10.0 mm with a high algorithm increased 74.83, 15.18 and 81.25%. The FWHM was almost constant on the measured SSP graph for evaluating the accuracy of slice thickness which represents the resolution of x/y plane and z-axis, but it was measured to be higher than the nominal slice thickness set by user. The FWHM and FWTM of z-axis with axial scan mode tended to increase significantly as the distance increased from gantry iso-center than the helical mode. Particularly, the thinner slice thickness that increased error range compare with the nominal slice thickness. The SPQI increased with thick slice thickness, and that was closer to 90% in the helical scan than the axial scan. In conclusion, by producing a phantom suitable for MDCT detectors and capable of quantitative resolution evaluation, it can be used as a specific method in the management of research quality and management of outdated equipment. Thus, it is expected to contribute greatly to the discrimination of lesions in the field of CT imaging.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.27-40
• /
• 2022

Building self-sustainable rural infrastructure and environment through smart digital agriculture technology innovation is one of the major goals of the Korean agricultural administration as a part of the nation's 4^th industry revolution. To identify areas for improving and effectively investing in the acceleration of rural development, 207 experts in the areas of crop science and smart digital agriculture technology were interviewed for their opinions and suggestions on 22 questions designed to recognize fundamental agricultural issues to be addressed and solutions to advance technology innovation and rural development. Majority of the participants expected smart digital agriculture technologies to resolve major agricultural issues and help build a better rural environment. To overcome technology gaps and resolve issues more effectively, further investment in training new technology experts and building stronger agricultural technology infrastructure is urgent, and persistent and systematic support from agricultural administration appears to be the key for accelerating the process. While the leading global groups of both public and private sectors have advanced their technologies beyond the field application stage, most of the Korean technologies remain at the early pilot stage. Aging population and lack of labor in rural areas, unknown future climate change, and challenges in sustainable rural development are expected to be resolved by smart digital agriculture technologies. Technological innovations by research institutes should be promptly deployed in the crop production field, and farm training systemically organized by local technology centers can accelerate farming revolution. Standardization of equipment and data systems is another key to the success of digitalization of food crop production and food supply chains nationwide.

• Korean Journal of Cognitive Science
• /
• v.33 no.1
• /
• pp.51-75
• /
• 2022

Transcranial direct current stimulation (tDCS) is a non-invasive brain stimulation that is able to alter neuronal activity in particular brain regions. Many studies have researched how tDCS modulates neuronal activity and reorganizes neural networks. However it is difficult to conclude the effect of brain stimulation because the studies are heterogeneous with respect to the stimulation parameter as well as individual difference. It is not fully in agreement with the effects of brain stimulation. In particular few studies have researched the reason of variability of brain stimulation in response to time so far. The study investigated individual variability of brain stimulation based on circadian rhythm and chronotype. Participants were divided into two groups which are morning type and evening type. The experiment was conducted by Zoom meeting which is video meeting programs. Participants were sent experiment tool which are Muse(EEG device), tdcs device, cell phone and cell phone holder after manuals for experimental equipment were explained. Participants were required to make a phone in frount of a camera so that experimenter can monitor online EEG data. Two participants who was difficult to use experimental devices experimented in a laboratory setting where experimenter set up devices. For all participants the accuracy of 98% was achieved by SVM using leave one out cross validation in classification in the the effects of morning stimulation and the evening stimulation. For morning type, the accuracy of 92% and 96% was achieved in classification in the morning stimulation and the evening stimulation. For evening type, it was 94% accuracy in classification for the effect of brain stimulation in the morning and the evening. Feature importance was different both in classification in the morning stimulation and the evening stimulation for morning type and evening type. Results indicated that the effect of brain stimulation can be explained with brain state and trait. Our study results noted that the tDCS protocol for target state is manipulated by individual differences as well as target state.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.15-24
• /
• 2021

This study is about the introduction and usefulness evaluation of the manufacturing method of the bolus-helmet. Helmet-production for the treatment of scalp tumor patients has been tried and will continue in many creative and various ways. However, Most of the research data did not significantly reduce the psychological burden and physical and physical discomfort that the patient had to bear due to the time and economic cost required for the production of the helmet, the convenience of production, and the complexity of the process. In addition, recently, studies using more advanced technologies and equipment such as 3D-printer technology, which are being studied as a way to increase the treatment effect, are being introduced, but the time, economic cost, and psychological and physical burden are still the sole responsibility of the patient. Isn't it getting worse? The reality is that the thoughts of concern cannot be erased. Therefore, by maintaining the physical properties of the bolus and manufacturing a helmet without incurring additional costs, the physical and physical discomfort aggravated to the patient was reduced and the procedure and time for helmet manufacturing were minimized. In this way, it was possible to reduce the time, economic cost, and physical discomfort required for the production of the helmet, and it was also possible to minimize the psychological burden of the patient, although it is invisible. Additionally, in evaluating the usefulness of helmets, we are able to continuously seek and develop ways to reduce the air-gap interval, and as a result, we will be able to introduce a method to keep it within 2.0mm along with the manufacturing method through this study. I feel very welcome. Finally, I hope that anyone working in the Department of Radiation Oncology will be able to easily manufacture the helmet required for radiation therapy using a bolus through the guide-line on helmet manufacturing provided by this institute. I hope and hope that if you have any questions or inquiries that arise during the production process, please feel free to contact us through the researcher's e-mail or mobile phone at any time.