• Journal of Biosystems Engineering
• /
• v.11 no.1
• /
• pp.52-63
• /
• 1986

This study was performed to find out drying characteristics and develop drying model for the design of an efficient dryer or drying system of red peper. The basic model which describes drying phenomenon of red pepper was firstly established, and drying tests were conducted at 14-different drying conditions. In this test, the effects of drying air temperature and relative humidity on the rate of drying were undertaken. Finally, a new drying model based on these experimental results was developed to describe the drying characteristics of red pepper. The results from this study may be summarized as follows. 1. Drying constant of the basic model established from Lewis' experimental model and diffusion equation was theoretically deduced as a function of moisture content and inner-temperature of red pepper. 2. From the results of drying tests, drying air temperature was found to have the greatest effect on the rate of drying. However, the effect of temperature was small for the condition of high relative humidity, and for low temperature, the effect of relative humidity was found to be large even though the range of relative humidity was low. 3. Modified Henderson equation was found to be better than Chung equation as the EMC model for the estimation of the equilibrium moisture content of red Pepper. 4. Constant-rate drying period did not exist in the red pepper drying test. And falling-rate drying period was divided into three distinct phases. Drying rate was dependent on the moisture content, the inner-temperature of red pepper and the change of physical property due to drying. 5. Drying constant increased with decrease of free moisture content, but it decreased at the end of the drying period. Also, drying constant was dependent on the drying air temperature and relative humidity. 6. The new drying model developed in this study was found to be most suitable in describing the drying characteristics of red pepper. Therefore, it may be concluded that drying time could be accurately estimated by the new drying model.

• Journal of the Korean Society of Tobacco Science
• /
• v.8 no.1
• /
• pp.23-31
• /
• 1986

The water content, physical property and sensory of cigarette brands lave been studied from the view point of the individual and inner packages. It was found that the cigarettes had absorbed the moisture from alto more than 56% of a relative humidity (RH) and lost it under RH, 56%. The critical moisture contents for the optimum quality of cigarette maintenance were 7.7% through 14.595 in the range of equilibrium relative humidity (ERH) 52.2%-63.5%. The ERH at the initial moisture content of 12.1% showed 58.8% When cigarettes were storaged in 9095 of RH and 4$0^{\circ}C$, the shelf life of the Inner package was respectively shown 18.8 days In cellophane, 33.3 days In PET(25u), 69.8 days in OPP and 73.5 days in OPP film coated with PVDC. As shown above, the longest life time was found in the OPP film coated with PVDC. In the individual packages, the shelf life of packaging materials used above was significantly short in the same conditions as of the inner packages. Each shelf life of the individual packages was same In order comparing with that of the inner Packages.

• Korean Journal of Food Science and Technology
• /
• v.19 no.3
• /
• pp.231-238
• /
• 1987

Two kinds of soy pastes with different colors (reddish brown and yellowish white) were dehydrated by freeze drying in powder form. Hygroscopic behaviors of powdered soy pastes were investigated under the conditions of various water acitivities (0.11-0.88) and three different temperatures (25,40 and $50^{\circ}C$), and presented a kinetic and thermodynamic interpretatons in the view point of qualities and storage stability. Moisture absorption isotherms of powdered soy pastes were of type II according with BET classification and can be described by the Henderson's empirical equation. The safe storage moisture levels calculated by the Laurie's equation were ranging from 5.5 to 3.98% dry basis with oaring temperatures. The moisture absorption process for powdered soy paste followed the Ist order kinetic in the difference of equilibrium moisture content and arbitrary moisture content and the initial step was characterized by very fast absorption of moisture. The change of, dispersion capacity and color difference for powdered soy paste were extremely dependent upon water activity under the storage and the maximum stability was found at safe storage moisture levels. Also, the variation of thermodynamic parameters with moisture content was significant at safe storage moisture content levels and suggested d the considerable correspondence to storage stability of powdered soy paste.

• Korean Journal of Food Science and Technology
• /
• v.22 no.7
• /
• pp.817-823
• /
• 1990

The sorption characteristics of red pepper powders in terms of mixing ratio of seeds to red pepper powders were investigated at various relative humidities and temperatures as storage conditions. At lower relative humidity below 43% RH, the sorption equilibrium was easily reached regardless of mixing ratio, whereas at higher relative humidity above 75%, the powders gained moisture rapidly, resulting in the color change to brown. At extremely lower RH below 33%, decoloration occurred in red pepper powder. The moisture contents of monolayer value for red pepper powders without seeds were ranging from 5.88% to 7.35% inversely proportional to the temperature. The moisture contents of monolayer value decreased with increase of mixing ratio of seeds.

• Food Science and Preservation
• /
• v.15 no.1
• /
• pp.74-78
• /
• 2008

Desorption experiments were carried out on soybean (Taegwang) at 5, 15, 25, 35, $45^{\circ}C$ for moisture contents between 6.74 and 28.87%(db). The method employed was to measure the equilibrium relative humidity (ERH) of air in contact with the grain under static conditions, using an electronic hygrometer. The effects of temperature and moisture contents were investigated, and the measured values were fitted to the modified Henderson, the modified Chung-Pfost, the modified Halsey, the modified Oswin and the modified GAB model. The ERHs of soybean under the moiture content of 16.67%(db) decreased with an decrease in moisture content and temperature, but the ERH of the moisture content of 28.87%(db) material decreased with an increase of temperature. The modified GAB model was the best in describing the EMC/ERH of soybean.

• Journal of Korean Society of Forest Science
• /
• v.37 no.1
• /
• pp.17-30
• /
• 1978

Press drying was used on italian poplar (Populus euamericana) to find the profitable means of drying. This study was designed to investigate the process of platen drying considering core temperature, drying time, current moisture content, drying rate, shrinkage and recovery, and green volume specific gravity, equilibrium moisture content and dimensional stability of press dried material and air dried material, The drying tests were conducted using 1.5 centimeter thick material at platen temperature of $175^{\circ}C$. The results were summarized as follows. 1. Core temperature was divided into three stages of drying characterized by period initial heating, plateau temperature and rising core temperature. Plateau temperature was 114 to $119^{\circ}C$. 2. The following predicting equations of drying time(y) in different core temperatures were developed for initial thickness($x_1$), initial moisture content ($x_2$) and final moisture content ($x_3$) 3. The predicting equaltion of current moisture content(u) was log u=4.658-0.060t as funtion of drying time(t) and that of drying rate(r) was log r=-2.797-0.049t. Current moisture content and drying rate of air drying were shown in figure 2. 4. The predicting equation of shrinkage in thickness direction(y) was log y=1.933+0.038t as function of drying time(t), and that of expansion in width direction was $y=-0.692+0.043t-0.001t^2$. 5. Thickness shrinkage was increased more than proportional at to pressure increase. Width shrinkage and thickness recovery was greatest at 35psi. 6. Green volume specific gravity of press dried material was 25% greater than that of air dried material. But equilibrium moisture content of press dried material was less 24% than that of air dried material. Antishrinkage efficiency of press dried material were obtained 27.7%.

• Microbiology and Biotechnology Letters
• /
• v.32 no.1
• /
• pp.84-90
• /
• 2004

Diglyceride (DG) was prepared by reaction of soybean oil and glycerol in the presence of lipase. The initial rate of DG production was greatly affected by the amount of lipase. However the DG content at equilibrium was hardly affected by the amount of lipase added to the reaction mixture. The initial rate of FFA formation was highly affected by the moisture content between 0.5 and 2.3%, but at higher water content (3.3-5.2%), there was a small increase in the rate. And DG content at equilibrium slowly increased with the increase of the water content in glycerol up to 4.4%. However, there was a sharp decrease in DG content at higher water content (5.2-6.4%) due to higher free fatty acid production. The highest yield of DC was obtained at the temperature ranges of 30-5$0^{\circ}C$. The final yield of DG was not dependent on the glycerol (GL) to triglyceride (TG) molar ratio. However, at the molar ratio of 0.75:1 (GL/TG), the enzyme-catalyzed reaction was highly efficient and utilized all the glycerol. In optimized conditions for glycerolysis a yield of approximately 45% DG was obtained. 66% of total DG was 1,3-DG.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.1
• /
• pp.40-51
• /
• 2006

The objective of this research is to analyze a possibility for the utilization of carbonized bark and develop the technique for carbonization of bark for using as the adsorbent, the soil improvement agent, the carrier for microbial activity, health products, and so on. The properties of bark charcoals such as methylenehlue adsorption (MBA), equilibrium moisture content (EMC), far infra rad emissivity, pH, water retention and caloric value were analyzed. The MBA values of bark charcoals carbonized for 8 hr of carbonization time at $800^{\circ}C$ of carbonization temperature for Larix leptolepis, Pinus koraiensis, Pinus rigida were greater than 110 mg/g. The bark charcoals pH values of all three species that were carbonized for 4 hr of carbonization time at $400^{\circ}C$ of carbonization temperature was 6.6 and carbonized for 4 hr at 600 and $800^{\circ}C$ was about 9. Therefore the bark charcoals of those species could be used as charcoals if the carbonization temperature and time were controlled.

• Journal of the Korean Wood Science and Technology
• /
• v.27 no.3
• /
• pp.7-16
• /
• 1999

This research was carried out to compare structure, equilibrium moisture content(EMC), adsorption and acoustical properties between 4 retention levels of saligenin(o-hydroxybenzyl alcohol) treated, heat-treated and untreated chestnut(Castanea crenata S. et Z.) and paulownia(Paulownia spp.) woods. The cell structures of untreated wood and heat-treated wood were not different but the cell wall of saligenin treated wood was thicker than that of untreated wood for both species. EMC of untreated wood was the highest, next was that of heat-treated wood, and that of saligenin treated wood was the lowest, and among saligenin treated woods, EMC was decreased as retention level increased for both species. Adsorption curves were parabolically increased. Acoustical properties of saligenin treated wood were most improved, and the next were those of heat-treated wood. Comprehensive acoustical property was improved at retention level 20% and 30% for chestnut wood, and at retention level 80% for paulownia wood.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.