• Nuclear Engineering and Technology
• /
• v.33 no.1
• /
• pp.83-92
• /
• 2001

The properties of off-gas generated from vitrification process of ion-exchange resin were characterized. Theoretical composition and flow rate of the off-gas were calculated based on chemical composition of resin and it＇s burning condition inside CCM. The calculated off-gas flow rate was 67.9Nm$^3$/h at the burning rate of 40kg/h. And the composition of off-gas was avaluated as $CO_2$(41.4%), steam(40.0%), $O_2$(13.3%), NO(3.6%), and SO$_2$(1.6%) in order. Then, actual flow rate and composition of off-gas were measured during pilot-scale demonstration tests and the results were compared with theoretical values. The actual flow rate of off-gas was about 1.6 times higher than theoretical one. The difference between theoretical and actual flow rates was caused by the in-leakage of air to the system, and the in-leakage rate was evaluated as 36.3Nm$^3$/h. Because of continuous change in the combustion parameters inside CCM, during demonstration tests, the concentration of toxic gases showed wide fluctuation. However, the concentration of CO, a barometer of incompleteness of combustion inside CCM, was stabilized soon. The result showed quasi-equilibrium state was achieved two hours after feeding of resin.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.5 no.3
• /
• pp.217-225
• /
• 1993

Nonflammable mixtures of flammable and nonflammable refrigerants are possible as substitute refrigerants for use in domestic heat pumps and refrigerators. Refrigerant leakage from such a system is of paramount concern since it is possible that the resulting mixture composition remaining in system will reside in the flammable range. This paper presents a simulation of a leakage process of refrigerant mixtures. Idealized cases of isothermal leakage process are considered in this study representing a slow leak. Simulation is performed for selected composition of binary and ternary refrigerant mixture; R-32/134a and R-32/125/134a. Mixture compositions with respect to percentage leak of original charge are presented. In isothermal leakage process, both vapor and liquid compositions of more volatile refrigerant decrease during vapor and liquid leak, but the total composition of this component decreases during vapor leak and increases during liquid leak. Vapor and liquid compositions are determined depending on the vapor-liquid equilibrium relation of the refrigerant mixture. The refrigerant mixture left in the system can go to a nonflammable direction relying on which component in the mixture is flammable.

• Journal of the Korean Chemical Society
• /
• v.23 no.4
• /
• pp.187-197
• /
• 1979

The molar optical rotation of poly(cis-5-methylproline) was measured in solvent mixtures of chloroform and chloroethanol. After proper allowance for time-dependent mutarota-tions, equilibrium states between form A and form B were observed to occur with a solvent composition of 0.5~10 % chloroethanol in chloroform by volume. From the equilibrium constants, which were calculated by optical rotations at equilibrium measured at three different temperatures (5, 25, and 45 $^{circ}$C), the thermodynamic parameters-free enthalpy, enthalpy and entropy changes for the mutarotation-were evaluated. It was found that starting with equimolar concentrations of form A and form B, the forward mutarotation occurred in the solvent compositions of chloroethanol greater than 3 % by volume, whereas the reverse mutarotation resulted in solvent compositions of chloroethanol less than 3 % by volume. The changes in enthalpy and entropy for the forward mutarotation were found to be positive, while those were for the reverse mutarotation were negative. The driving forces for the forward mutarotation were found to be the increase in entropy, whereas that for the reverse mutarotation was the negative enthalpy change. The thermodynamic data were explained by the interaction between polymer and solvent, i.e., preferential hydrogen bonding of chloroethanol with the carbonyl group in form B over form A, and by difference in conformational energies between form A and form B.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.373-382
• /
• 2008

First reported geochemical characteristics of mantle xneoliths (spinel peridotites) from Sunheul-ri, Jeju Island, provide important clues for understanding the lithosphere composition, equilibrium temperature, and the period of entrainment and transport of the xenoliths in the host magma. Core and rim of mineral phases in the xenoliths are constant chemical compositions as $Fo_{89-90}$ of olivines. The ranges of equilibrium temperature, obtained by two pyroxenes geothermometer, are about $951{\sim}1035^{\circ}C$ for Sunheul-ri spinel peridotite xenoliths and are similar to the range of equilibrium temperatures for the xenoliths from other sites in Jeju island. The period of entrainment and transport of the xenoliths in the host magma of Sunheul-ri mantle xenoliths is about 42 days.

• Resources Recycling
• /
• v.23 no.2
• /
• pp.17-25
• /
• 2014

The thermal effect on the compositional change of the $SO_2$ absorption process product was investigated compared with the composition of raw material when dolomite is employed in place of lime in the scrubbing process based on thermodynamic estimation. It was considered that the equilibrium reactions which directly related with the formation of $CaSO_4$ and $MgSO_4$, the absorption process products, are those between $Ca^{2+}$ and $Ca(OH)_2$, $Mg^{2+}$ and $Mg(OH)_2$, and the secondary dissociation reaction of $H_2SO_4$. It was thought to be necessary to examine the enthalpy change for the formation reactions of $CaSO_4$ and $MgSO_4$ along with the thermal feature of the relative reactions to figure out the influence of temperature on the compositional change of absorption process products. The stable regions for $Ca(OH)_2$ and $Mg(OH)_2$ in Pourbaix diagram were found to be increased as temperature rises and the equilibrium reaction between $Ca^{2+}$ and $Ca(OH)_2$ was investigated to be more strongly influence by temperature change compared with the equilibrium reaction between $Mg^{2+}$ and $Mg(OH)_2$. The amounts of $CaSO_4$ and $MgSO_4$ were anticipated to be decreased with temperature considering the thermal characteristics for the equilibrium reactions regarding calcium, magnesium, and $H_2SO_4$. It was understood that the formation ratio between $CaSO_4$ and $MgSO_4$ is greater than the composition ratio between calcium and magnesium contained in dolomite at specific temperature and the decrease of the formation ratio of $CaSO_4$ and $MgSO_4$ with temperature was estimated to be diminished as the content of calcium in dolomite is increased. In addition, the extent of the change in the compositional ratio between absorption process products was examined to be reduced compared with the composition of raw material as the calcium content in dolomite is raised.

• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.20-23
• /
• 2003

Low-sulfidation style ore deposits, the major source of Au, Ag, and Hg, are formed from neutral-pH, reduced hydrothermal solutions close to equilibrium with their host rocks. The waters are low-salinity (〈1 wt % NaCl equiv.) but relatively gas rich (1-2 wt % $CO_2$), and are largely meteoric water. However, the contribution of magmatic components to the epithermal system, its temporal importance, and its relation to the source of ore metals are largely controversial. (omitted)

• Journal of the Korean institute of surface engineering
• /
• v.21 no.1
• /
• pp.10-18
• /
• 1988

The variation of Composition and the microstructure of Zn-Ni alloy electrodespposits were investigated to the electrolysis conditions chloride bath. The codeposition mechanism is of the equilibrium type in the electrolysis condition of the high temperature(6$0^{\circ}C$)and high flow rate (1.2-3.0m/sec). The(411, 330) perferred orienation was mainly developed in the Zn-Ni electrodeposir with ${\gamma}$-phase structure, while the(422.600) orientation was closely related to the commposition and the structure of the alloy electrodeposit.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.479-483
• /
• 1995

The synergistic extraction of palladium(Ⅱ) was studied with 1,2-dichloroethane containing thenoyltrifluoroacetone (TTA; HA) and tri-n-octylphosphine oxide (TOPO; S). The main composition of synergistic adduct extracted into 1,2-dichloroethane phase was found to be PdA2S2. The equilibrium constants of the synergistic reaction were calculated. The application of this method to synthetic mixture for the separation of Pd from Pt was developed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.6
• /
• pp.1819-1826
• /
• 1996

This paper present the claculating method of optimum correction mass within permissible vibration linits for ratating machinery in two-plane field balancing. Basic technique of this method is based on influence coefficient method, and grphic vector composition that the resultant of two influence vectors obtained by trial mass have to be equilibrium with initial vibration vector in the each correction plane. Genetic algorithm which is a search algorithm based on the mechanism of natural selection and natural genetics is sued for vector composition, and SUMT method is used to objective function which seeks optimum correction mass for balancing a rotor.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.