• 제목/요약/키워드: Equilibrium Constant

검색결과 544건 처리시간 0.031초

수치해석을 위한 변형된 난류 다공성 모델링 (A Modified Turbulent Porous Modeling for Numerical Analysis)

  • 정길완;이관수
    • 대한기계학회논문집B
    • /
    • 제26권6호
    • /
    • pp.875-882
    • /
    • 2002
  • The modeling for turbulent flow through a porous media has not been confirmed because of a undetermined constant which appears in the governing equations. In present study, the turbulent porous modeling based on the local thermal equilibrium has been extended to the turbulent clear flow. A undetermined constant is also suggested by microscopic analysis. The microscopic analysis is performed in the flat tube with micro-channels, and it confirms that the undetermined constant is 0.99. It is shown that the results of the macroscopic analysis using confirmed constant agree well with those of the microscopic analysis with a maximum error of 3.5%.

Protein Adsorption on Ion Exchange Resin: Estimation of Equilibrium Isotherm Parameters from Batch Kinetic Data

  • Chu K.H.;Hashim M.A.
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • 제11권1호
    • /
    • pp.61-66
    • /
    • 2006
  • The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

묽은 전해질용액에서 이온의 활동도계수 계산 (Calculation of the Activity Coefficients of Ions in Weak Electrolyte Solutions)

  • 이만승;손성호
    • 자원리싸이클링
    • /
    • 제27권5호
    • /
    • pp.9-13
    • /
    • 2018
  • 화학반응의 평형상수는 표준자유에너지변화와 관련된다. 평형상수는 반응물과 생성물의 활동도의 비이며 수용액에서 이온강도의 증가로 인한 용질의 비이상성을 고려할 필요가 있다. 묽은 전해질용액에서 이온의 활동도계수를 구할 수 있는 식인 Debye-$H{\ddot{u}}ckel$ 식의 유도과정과 확장식을 설명하였다. 전해질의 평균활동도계수의 실험값로부터 이온의 활동도계수를 구하는 방법을 설명하였다.

결정슬래그의 $T_{cv}$ 측정 시 실험변수에 따른 영향 (Effects of Experimental Variables on the Measurement $T_{cv}$ of Crystalline slags)

  • 김유나;오명숙
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2008년도 추계학술대회 논문집
    • /
    • pp.254-257
    • /
    • 2008
  • For crystalline slags, of which the viscosity rapidly increases at $T_{cv}$ due to the formation of crystalline phases, the Tcv is affected by measurement conditions. In this study, we investigated the effect of cooling rate, and alumina dissolution on the determination of $T_{cv}$. Using synthetic slag samples based on the composition of Alaska Usibelli slag, $T_{cv}$ were determined under a constant cooling rate of $2^{\circ}C$/min, and under rapid cooling with holding time to allow the slag to reach thermal and rheological equilibrium. The effect of alumina dissolution was investigated using platinum lined crucibles. The constant cooling resulted in lower $T_{cv}$ by $33^{\circ}C$ as compared to the equilibrium measurements. Under $2^{\circ}C$/min cooling, the blocking alumina dissolution resulted in lower $T_{cv}$ by $23^{\circ}C$. When the $T_{cv}$ was measured under $2^{\circ}C$/min cooling using an alumina crucible, therefore, the effects of a constant cooling is somewhat offset by the alumina dissolution effect, and bring the measured value closer to the true value.

  • PDF

A constant tendon moment arms finger model in the sagittal plane

  • Lee, K.H.
    • 대한인간공학회:학술대회논문집
    • /
    • 대한인간공학회 1992년도 추계학술대회논문집
    • /
    • pp.46-53
    • /
    • 1992
  • Finger movements in the sagittal plane mainly consist of flexion and extension about the metacarpophalangeal(MCP) and proximal interphalangeal(PIP) joints. A kinematic finger model was developed with the assumption of constant tendon moment arms. Equations of static equilibrium were derived for the finger model using the principle of virtual work. Equations of static equilibrium for the finger model were indeterminate since only three equations were available for five unknown variables(forces). The number of variables was reduced based on information on muscular activities in finger movements. Then the amounts of forces which muscles exerted to maintain static equilibrium against external loads were computed from the equilibrium equations. The muscular forces were expressed mathematically as functions of finger positions, tendon moment arms, lengths of phalanges, and the magnitude and direction of external load. The external finger strength were computed using the equations of muscular forces and anatomical data. Experiments were performed to measure finger strengths. Measurements were taken in combinations of four finger positions and four directions of force exertions. Validation of the finger models and of procedure to estimate finger strengths was done by comparing the results of computations and experiments. Significang differences were found between the predicted and measured finger strengths. However, the trends of finger strengths with respect to finger positions were similar inboth the predicted and measured. These findings indicate that the finger model and the procedure to predict finger strengths were correctly developed.

  • PDF

에틸 아세토아세테이트 토토머리즘 평형 상수의 밀도 의존성 (The Effect of Solvent Density on the Ethyl Acetoaceate Tautomerism)

  • 박윤국
    • 공업화학
    • /
    • 제17권3호
    • /
    • pp.291-295
    • /
    • 2006
  • 본 연구에서는 아임계 및 초임계 이산화탄소하의 에틸 아세토아세테이트의 케토-에놀 토토머릭 평형상수를 후리에 적외선 분광기를 이용하여 세 가지 다른 온도에서 측정하였다. 케토-에놀 토토머릭 평형상수의 용매에 대한 밀도 의존성을 연구하기 위하여 정온하에서 이산화탄소의 압력을 변화시켰다. 용매인 이산화탄소의 밀도를 증가 시키면, 케토 토토머의 양이 증가하게 되어 케토-에놀 토토머릭 평형상수값이 감소한다. 에틸 아세토아세테이트의 케토-에놀 토토머릭 평형상수의 밀도의존성을 연구하기 위하여 변형된 격자유체수소결합 모델을 적용하였다.

일정한 약물 투여를 통한 HIV 감염자의 long-term Non-Progressor 전환 치료 (Treatment for HIV-Infected Patients to Induce Long-Term Non-Progressor with Constant Drug Dosage)

  • 김진영;김원희;고지현;정한별;정정주
    • 대한전기학회논문지:시스템및제어부문D
    • /
    • 제54권4호
    • /
    • pp.259-266
    • /
    • 2005
  • This paper presents a therapy that uses a constant drug dosage for leading HIV-infected patient to LTNP (Long-Term Non-Progressor). Based on analysis of CTLp (Cytotoxic T Lymphocyte precursor) concentration at equilibrium point and its bifurcation, we found the therapy with a drug whose efficacy is less than a certain level brings higher CTLp concentration at the equilibrium point. We observed a treatment with constant drug dosage whose efficacy is less than full treatment may lead HIV-infected patient to LTNP. It turns out that the treatment whose efficacy is less than full treatment is better in the point of performance on controllability.

The Characteristic Calulation of Carboxylic Ion Exchanger.

  • 손원근;김태일;김상헌;박수길;정장훈
    • Bulletin of the Korean Chemical Society
    • /
    • 제22권6호
    • /
    • pp.559-564
    • /
    • 2001
  • A method for calculating the main characteristics of a potentiometric titration curve in a carboxylic ion exchanger has been investigated. The potentiometric titration curves of simple electrolyte and ion exchangers (polyelectrolytes) showed a great difference between them. The acidity parameters of the ion exchangers, the thermodynamic constant (pK0), apparent equilibrium constant (K), and correction for the apparent equilibrium constant (b), were introduced and used to express the characteristics of the carboxylic ion exchanger. A characteristic equation related to the acidity parameters of the ion exchangers systems was derived. A fibrous carboxylic cation exchanger was used and potentiometric titration curves at different concentrations of the supporting electrolyte were obtained . To prove the validity of the characteristic equation, the concentration of the supporting electroyte was varied. In the present study, good agreement between the data points and the fitted curves was found in all the cases. The g (number of moles of alkali to 1 g of ion exchanger) of carboxylic ion exchanger was calculated from the concentration of supporting electrolyte (C), pH of the solution, and degree of neutralization of ion exchanger (x).

활성탄 물성에 따른 인 흡착의 동력학적 연구 (A Kinetic Study on the Phosphorus Adsorption by Physical Properties of Activated Carbon)

  • 서정범;강준원
    • 한국물환경학회지
    • /
    • 제26권3호
    • /
    • pp.491-496
    • /
    • 2010
  • This study aimed to obtain equilibrium concentration on adsorption removal of phosphorus by activated carbon, to express the adsorption characteristics following Freundlich isotherm and also, based on the value obtained, to investigate the relationship between physical properties of activated carbon and dynamics of phosphorus removal by obtaining rate constant and effective pore diffusivity. The results summarized from this study are as follows. Phosphorus adsorption equilibrium reaching time of powdered activated carbon was reduced as the dosage of activated carbon increases, while granular activated carbon despite increased dosage did not have influence on adsorption equilibrium reaching times of phosphorus as well, taking more than 10 hours. It was also noted that powdered activated carbon showed better adsorption ability than granular activated carbon. The value of constant (f) of Freundlich isotherm of powered activated carbon on phosphorus was 4.26 which is bigger than those of granular activated carbon. The adsorption rate constant on phosphorus of powered activated carbon with low effective diameter and iodine number was highest as $8.888hr^{-1}$ and the effective pore diffusivity ($D_e$) was lowest as $2.45{\times}10^{-5}cm^2/hr$, and the value of phosphorus adsorption rate constant of granular activated carbon was $0.174{\sim}0.372hr^{-1}$, It was revealed that, with the same amount of dosage, the adsorptive power of activated carbon with lower effective diameter was better and its rate constant was also high.

Equilibrium Concentration of Radionuclides in Cement/Groundwater/Carbon Steel System

  • Keum, D.K.;Cho, W.J.;Hahn, P.S.
    • Nuclear Engineering and Technology
    • /
    • 제29권2호
    • /
    • pp.127-137
    • /
    • 1997
  • Equilibrium concentrations of major elements in an underground repository with a capacity of 100,000 drums have been simulated using the geochemical computer code (EQMOD). The simulation has been carried out at the conditions of pH 12 to 13.5, and Eh 520 and -520 mV. Solubilities of magnesium and calcium decrease with the increase of pH. The solubility of iron increases with pH at Eh -520 mV of reducing environment while it almost entirely exists as the precipitate of Fe(OH)$_3$(s) at Eh 520 mV of oxidizing environment. All of cobalt and nickel are predicted to be dissolved in the liquid phase regardless of pH since the solubility limit is greater than the total concentration. In the case of cesium and strontium, all forms of both ions are present in the liquid phase because they have negligible sorption capacity on cement and large solubility under disposal atmosphere. And thus the total concentration determines the equilibrium concentration. Adsorbed amount of iodide and carbonate are dependent on adsorption capacity and adsorption equilibrium constant. Especially, the calcite turns out to be a solubility-limiting phase on the carbonate system. In order to validate the model, the equilibrium concentrations measured for a number of systems which consist of iron, cement, synthetic groundwater and radionuclides are compared with those predicted by the model. The concentrations between the model and the experiment of nonadsorptive elements cesium, strontium, cobalt nickel and iron, are well agreed. It indicates that the assumptions and the thermodynamic data in this work are valid. Using the adsorption equilibrium constant as a free parameter, the experimental data of iodide and carbonate have been fitted to the model. The model is in a good agreement with the experimental data of the iodide system.

  • PDF