• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.505-508
• /
• 2000

The success of target reconstruction in SAR(Synthetic Aperture Radar) imaging system is greatly dependent on the coherent detection. Primary causes of incoherent detection are uncompensated target or sensor motion, random turbulence in propagation media, wrong path in radar platform, and etc. And these appear as multiplicative phase error to the echoed signal, which consequently, causes fatal degradations such as fading or dislocation of target image. In this paper, we present iterative phase error estimation scheme which uses echoed data in all temporal frequencies. We started with analyzing wave equation for one point target and extend to overall echoed data from the target scene - The two wave equations governing the SAR signal at two temporal frequencies of the radar signal are combined to derive a method to reconstruct the complex phase error function. Eventually, this operation attains phase error correction algorithm from the total received SAR signal. We verify the success of the proposed algorithm by applying it to the simulated spotlight-mode SAR data.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.158-162
• /
• 1996

A split shaft device is commonly used to measure the radial force of lip seals. The radial force measured with this device includes some inevitable error. This error is caused by the fact that the split shafts cannot maintain a perfect circle when the interference becomes larger or smaller than some initial interference. In this study, a theoretical model for the calculation of the radial contact force has been carried out, and an explicit equation for the measurement error as a function of the initial interference and the interference to be measured has been obtained. The error when the interference is small is not dependent upon the material properties and the shape of the lip seal, but rather upon the amplitude of the initial interference and the interference to be measured. When the interference is larger or smaller than the initial interference, the measured contact force is always underestimated or overestimated.

• 한국방재학회 논문집
• /
• 제9권5호
• /
• pp.125-130
• /
• 2009

한강의 홍수예경보에 자주 사용되고 있는 저류함수법은 강우-유출관계의 비선형성을 고려한 적용성이 뛰어난 모형이지만, 우리나라의 지형특성을 고려한 매개변수 산정식이 존재하지 않아 실무에서 유역별, 사상별 매개변수 추정에 많은 노력과 시간을 투자하고 있는 실정이다. 그러므로 본 연구에서는 다중회귀분석을 이용하여 한강유역의 저류함수법 매개변수를 계산하기 위한 공식을 유도하여 저류함수법의 적용성을 높이고자 하였다. 상관분석을 통하여 다중회귀분석의 독립변수로는 유역의 유역면적, 하천경사, 유로연장이 사용되도록 결정되었으며, 다중공선성을 가지고 있는 독립변수들을 제거하고, 독립변수의 수를 달리하면서 한강유역 내 30개 소유역에 대해 일반화된 매개변수 산정식을 유도하였다. 제안된 회귀식은 모형의 개발에 사용되지 않은 한강유역 내 다른 지점인 문막수위표의 강우에 적용하여 그 적용성을 검증하였다. 제안된 회귀식을 한강공식이라고 명하고, 이는 한강유역 내에 홍수예경보나 유출계산에 저류함수법 적용 시 유용한 자료로 활용하고자 하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제15권7호
• /
• pp.2339-2355
• /
• 2021

In this paper, a joint probabilistic data association algorithm based on loss function (LJPDA) is proposed so that the computation load and accuracy of the multi-target tracking algorithm can be guaranteed simultaneously. Firstly, data association is divided in to three cases based on the relationship among validation gates and the number of measurements in the overlapping area for validation gates. Also the contribution coefficient is employed for evaluating the contribution of a measurement to a target, and the loss function, which reflects the cost of the new proposed data association algorithm, is defined. Moreover, the equation set of optimal contribution coefficient is given by minimizing the loss function, and the optimal contribution coefficient can be attained by using the Newton-Raphson method. In this way, the weighted value of each target can be achieved, and the data association among measurements and tracks can be realized. Finally, we compare performances of LJPDA proposed and joint probabilistic data association (JPDA) algorithm via numerical simulations, and much attention is paid on real-time performance and estimation error. Theoretical analysis and experimental results reveal that the LJPDA algorithm proposed exhibits small estimation error and low computation complexity.

• 한국세라믹학회지
• /
• 제30권1호
• /
• pp.78-84
• /
• 1993

In PMN-pyrochlore phase mixtures, dielectric constant was measured as a function of the volume fraction of pyrochlore phase and considered with general effective media(GEM) equation. For the application of GEM equation to this system, the critical volume fraction(Vc) where connectivity between the perovskite PMN and pyrochlore phase changed from 0-3 to 3-3, was determined based on the each particle size ratio of two phases with microstructural observation. And then the t value was determined from modified percolation powder-law dependence ( K-Kc (V-Vc)t). In the case of applying such values of t and Vc to the GEM equation, which provided a reasonable fit to the measured dielectric constant within the experimental error range.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.349-356
• /
• 1986

본 논문에서는 열손실에 의한 오차를 배제하기 위하여 원판형시편의 전후면에 서의 열손실과 반경방향의 열손실을 고려하고 2층으로 된 적층재료의 열확산방정식을 Green함수를 이용하여 해석하므로서 피복재료들의 열물성치를 정확하게 측정하기 위한 임의의 축대칭 열원의 펄스를 사용하여 열손실 및 펄스시간의 효과에 의한 오차를 최 소화 할 수 있는 방법을 제시 하고자 한다.

• Communications for Statistical Applications and Methods
• /
• 제10권2호
• /
• pp.341-352
• /
• 2003

Collecting data through experiment, the observers are an import source of measurement error and the inference on the measure of agreement, say kappa, is necessary. The models commonly used are complicated general mixture model, which have many nuisance parameters. Orthogonalization of parameters reduce the effect of nuisance parameter. Orthogonalization of estimating function gives the same effect as the parameter orthogonalization. In this study, the method for orthogonalization of estimating equation is studied and applied to the Beta-binomial model to examine the properties of the estimate of kappa. As a result, the likelihood function is insensitive to the change of the nuisance parameter and bias is smaller than the result of m.1.e. when kappa has extreme values

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.666-669
• /
• 2002

In this Research, we would like to perform optimal design by using theoretical equation and experimental equation for development of transmission and P.T.O on work vehicle with multi-function that is suited fruit cultures in my country. For the purpose of reducing development period about product and minimizing risk about design error, detail design and interference check are accomplished by FEM analysis and CAD software.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권4호
• /
• pp.235-243
• /
• 2000

The probabilistic data association filter(PDAF) is known to provide better tracking performance than the standard Kalman filter(KF) in a cluttered environment. In this paper, the stability of the PDAF of Fortmann et al[7], in the presence of uncertainties with regard to the origin of measurement, is investigated. The modified Riccati equation derived by approximating two random terms with their expectations is used to prove the stability of the PDAF. A new Lyapunov function based approach, which is different from the quantitative evaluation of Li and Bar-Shalom[7], is pursued. With the assumption that the system and observation noises are bounded, specific tracking error bounds are established.

• 대한수학회보
• /
• 제53권2호
• /
• pp.487-494
• /
• 2016

Let p be an odd prime and c be a fixed integer with (c, p) = 1. For each integer a with $1{\leq}a{\leq}p-1$, it is clear that there exists one and only one b with $0{\leq}b{\leq}p-1$ such that $ab{\equiv}c$ mod p. Let N(c, p) denote the number of all solutions of the congruence equation $ab{\equiv}c$ mod p for $1{\leq}a$, $b{{\leq}}p-1$ in which a and $\bar{b}$ are of opposite parity, where $\bar{b}$ is defined by the congruence equation $b{\bar{b}}{\equiv}1$ mod p. The main purpose of this paper is using the mean value theorem of Dirichlet L-functions and the properties of Gauss sums to study the computational problem of one kind mean value function related to $E(c,p)=N(c,p)-{\frac{1}{2}}{\phi}(p)$, and give its an exact computational formula.