• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.83-87
• /
• 2001

Many communication systems require bandpass filters with sharp skirt frequency characteristics in order to avoid the interferencce, which results in more order in the filter design. However, because of the limited Q values bandpass filters made of small sized ceramic resonators suffer from relatively large ripples at the band edges as the order of the filter increases. In order to compensate the large ripples while maintaining the sharp skirt frequency we propose a new RF amplitude equalizer. The equalizer made of two pole bandpass filter and an amplifier whose amplitude characteristics are the reverse of those of the bandapss filter. At the cellular band 9-pole bandpass filter with 10 MHz bandwidth exhibits 3 dB ripple when 8mm*8mm ceramic coaxial resonators are used. We added the RF equalizer to this filter and the flatness is improved as less than 1 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.5A
• /
• pp.500-508
• /
• 2008

Direct-sequence ultra-wideband(DS-UWB) system is being considered as one of promising transmission technologies for wireless personal area networks(WPANs). Due to relatively low spreading factors and huge bandwidth of transmit signal, a DS-UWB receiver needs to be equipped not only with a rake receiver but also with an equalizer, of which the equalizer is not required for traditional direct-sequence code division multiple access(DS-CDMA) systems. The number of rake fingers is limited in practice, influencing the performance of the subsequent equalizer. In this paper, we derive a decision feedback equalizer(DFE) for DS-UWB systems based on the minimum mean square error(MMSE) criterion, and investigate the impact of various parameters on the DFE performance in realistic scenarios. In particular, we propose an approach to improving the performance of the DFE using additional channel estimates for multipaths not combined in the rake receiver, and discuss how the accuracy of channel estimation affects desirable DFE configuration. Moreover, we present simulation results that show the impact of turbo equalization on the DFE performance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.387-393
• /
• 1987

The introduction of a digiral subscriber loop transmission system necessitates an optimized line interface solution. To meet this objective an adaptive line equalizer has been developed. The equalizer can be compensated up to 42 dB line loss at 200KHz, and operated up to 3.2 Km transmission length (0.4 mm\ulcornercable)at a rate of 400Kb/s. This has been builted using a variable \ulcorner equalizer to compensate a frequency-attenuation characteristics of metallic cable, an AGC (automatic gain control) circuits with simple control algorithm, and various filters to minimize a transmission constraints over subscriber loop. The purpose of this paper is to present a short description of a design of the adaptive line equalizer with a summary of implementation results. Some design concepts and considerations which results in an implementation of the equalizer are also given.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3A
• /
• pp.179-187
• /
• 2012

In this paper, we propose an adaptive DFE (Decision Feedback Equalizer) based on LDPC (Low Density Parity Check) code for phase noise suppression and performance improvement. The proposed equalizer in this paper is applied for wireless repeater system. So as to meet ever increasing requirements on higher wireless access data rate and better quality of service (QoS), the wireless repeater system has been studied. The echo channel and RF impairments such as phase noise produce performance degradation. In order to remove echo channel and phase noise, we suggest a novel adaptive DFE equalizer based on LDPC code. The proposed equalizer helps to compensate RF impairments and improve the performance significantly better than used independently. In addition, proposed equalizer has less iteration number of LDPC code. So, the proposed equalizer system has low complexity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.3-8
• /
• 2013

Bit patterned media (BPM) storage is one of the promising technologies to overcome the limitations of the conventional magnetic recording. However, there are some problems in a high areal density BPM storage, inter-track interference, inter-symbol interference and noise which are severely degrading performance of the system with reducing the bit error rate. In this paper, we present a simple iterative two-dimensional equalizer based on the contraction mapping theorem to mitigate these adverse effects. Furthermore, we examine that the channel characteristics of the proposed two-dimensional equalizer satisfies the convergence conditions. In the simulation we demonstrate the bit separation characteristics of the one-dimensional equalizer and the two-dimensional equalizer and evaluate the BER performance of the proposed equalizer comparing with the conventional equalizers. According to the results of experiments, the proposed equalizer is an promising equalizer with maintaining proper complexity for a high areal density BPM storage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.10A
• /
• pp.1034-1041
• /
• 2007

In this paper, we propose a FD USE (frequency domain minimum mean square error) equalizer algorithm for MBOK DS-UWB (M-ary bi-orthogonal keying direct sequence UWB) systems considered as a PHY proposal for high-speed wireless communication in IEEE 802.15.TG3a. The conventional FD MMSE equalization scheme has a structural limit due to insertion of the cyclic prefix (CP) in all transmit packets, but the proposed scheme is able to equalize the channel effect without CP. In order to overcome channel estimation error by multipath delay, we introduce a moving FFT and a moving average scheme. Compared with conventional FD MMSE equalizer and the traditional TD (time domain) MMSE-RAKE receiver, the proposed FD MMSE equalizer has better BER performance and we demonstrate this result by computer simulation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.1
• /
• pp.35-47
• /
• 2002

This paper proposes a self organizing RBF neural network equalizer for the equalization of digital communications. It is the most important for the equalizer using the RBF neural network to estimate the RBF centers correctly and quickly, which are the desired channel states. However, the previous RBF equalizers are not used in the actual communication system because of some drawbacks that the number of channel states has to be known in advance and many centers are necessary. Self organizing neural network equalizer proposed in this paper can implement the equalization without prior information regarding the number of channel states because it selects RBF centers among the signals that are transmitted to the equalizer by the new addition and removal criteria. Furthermore, the proposed equalizer has a merit that is able to make a equalization with fewer centers than those of prior one by the course of the training using LMS and clustering algorithm. In the linear, nonlinear and standard telephone channel, the proposed equalizer is compared with the optimal Bayesian equalizer for the BER performance, the symbol decision boundary and the number of centers. As a result of the comparison, we can confirm that the proposed equalizer has almost similar performance with the Bavesian enualizer.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.57-64
• /
• 2009

Based on this article, I have analyzed the OFDM system which applies three types of equalizer forms in the two-path channel of the microwave baseband. The Two-path channel of microwave baseband had been simulated through the Rummler channel. In the Two-path channel, the OFDM system which has three forms of equalizer has been analyzed and the result is, equalizer 1-tab has great improvement in efficiency compared with Pre-FFT 11-tab which has noise power ratio less than 18dB. On the contrary, if the symbol energy to the noise ratio is more than 18dB, the equalizer which applies Pre-FFT 11-tab has greater efficiency compared to the equalizer which applies 1-tab frequency. Last but not least, the OFDM system which applies Dual equalizer has better efficiency compared to the system which has 1-tab frequency and equalizer which applies Pre-FFT 11-tab.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.413-415
• /
• 2008

The charge equalizer design for a series connected battery string is very challenging because it needs to satisfy many requirements such as implementation possibility, equalization speed, equalization efficiency, controller complexity, size and cost issues, voltage and current stress, and so on. Numerous algorithms and circuits were developed to meet the above demands and some interesting results have been obtained through them. However, for a large number of cells, for example, eighty or more batteries, the previous approaches might cause problems. Such problems include long equalization time, high controller complexity, bulky size, high implementation cost, and high voltage and current stress. To overcome these circumstances, this paper proposes a charge equalizer design method based on a battery modularization technique. In this method, the number of cells that we consider in an equalizer design procedure can be effectively reduces; thus, designing a charge equalizer becomes much easier. Furthermore, by applying the previously verified charge equalizers to the intramodule and the outer-module, we can obtain easy design of a charge equalizer and good charge balancing performance. Several examples and experimental results are presented to demonstrate the usefulness of the charge equalizer design method.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.281-282
• /
• 2008

Turbo equalizers which use MAP (maximum a posteriori probability) equalizer or MMSE (minimum mean square error) equalizer have shown high performance and adoptability [1], [2]. In this paper, we show that the BP (belief propagation) algorithm can also be applied in equalizer and when it is connected with channel code, it can replace the MAP equalizer with similar complexity and performance.