• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.2
• /
• pp.154-159
• /
• 2013

Alignment tolerance for EO/IR airborne camera using common optic is an important factor in stabilization accuracy and geo-pointing accuracy. Before airborne camera is mounted on the aircraft, defining alignment tolerance and verification of it is essential in production as well as research and development. In this paper we establish basic concept on the definition and elements of alignment tolerance for airborne camera and propose how to measure each of those elements. Components and the measurement sequence of alignment tolerance are as follows: 1) tolerance of alignment between EO and IR LOS. 2) tolerance of sensor alignment. 3) tolerance of position reporting accuracy. 4) tolerance of mount alignment

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1307-1309
• /
• 2003

The EO-1 spacecraft, launched November 21, 2000 into a sun synchronous orbit behind Landsat 7, hosts advanced technology demonstration instruments, whose capabilities are currently being assessed by the user community for future missions. A significant part of the EO-1 program is to perform data comparisons between Hyperion, ALI and Landsat 7 ETM+. In this paper, a comparison of forest classification results from Hyperion, ALI, and the ETM+ of Landsat-7 are provided for Wangqing Forest Bureau, Jilin Province, Northeast China. The data have been radiometrically corrected and geometrically resampled. Feature selection and statistical transforms are used to reduce the Hyperion feature space from 86 channels to 14 features. Classes chosen for discrimination included Larch, Spruce, Oak, Birch, Popular and Mixed forest and other landuses. Classification accuracies have been obtained for each sensor. Comparison of the classification results shows : Hyperion classification results were the best, ALI's were much better than ETM+.

• Membrane Journal
• /
• v.21 no.3
• /
• pp.213-221
• /
• 2011

Using poly(ethylene oxide) (PEO) as a polymer host, poly(ethylene glycol) (PEG) as a plasticizer, potassium iodide and iodine as sources of $I^-/I_3^-$, polymer electrolyte membranes were prepared. Based on the polymer electrolytes, solid-state dye-sensitized solar cell (DSSC)s were fabricated. The content of PEG in the electrolyte was controlled to be 95%. The mole number of KI per 1 mole of EO ([KI]/[EO] ratio) in the electrolyte was changed to be 0.022, 0.044, 0.066 and 0.088. The electrolyte membrane showed wax phase in ambient temperature. The ionic conductivity increased with increasing KI content to reach the maximum value at which [KI]/[EO] ratio is 0.066. After the maximum value, the ionic conductivity decreased with increasing KI content. In the case of DSSC, the Voc decreased continuously with increasing KI content in the polymeric electrolyte membrane. The $J_{SC}$ increased with increasing KI content to show maximum value at which [KI]/[EO] ratio is 0.044. In the higher KI content region, $J_{SC}$ value decreased with increasing KI content.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.62 no.4
• /
• pp.223-226
• /
• 2013

In this study, we investigated the electro-optical(EO) characteristic of fringe-field switching(FFS) mode cell by the two kinds of ultraviolet(UV) alignment method on the organic thin film(polyimide: PI). The suitable organic layersfor FFS cell and the aligning capabilities of nematic liquid crystal(NLC) using the in-situ photoalignment method were studied Disclination is observed after conventional photoalignment method for 1h, and in-situ photoalignment method for 1h. Monodomain alignment of the NLC can be observed via in-situ photoalignment method for 2h and 3h. It is considered that NLC alignment is due to photo-depolymerization of the polymer with oblique non-polarized UV irradiation on PI surface. An unstable V-T curve of UV-aligned FFS-LCD with conventional photoalignment method can be achieved. However, a stable V-T curve of UV-aligned FFS-LCD with in-situ photoalignment method(1h), and V-T curve of UV-aligned FFS-LCD with in-situphotoalignment method was much stable comparing with that of other UV-aligned FFS-LCD's. As a result, more stable EO performanceof UV-aligned FFS-LCD with in-situphotoalignment method for 3h is obtained than that of the other UV-aligned FFS-LCD's.

• PNF and Movement
• /
• v.13 no.1
• /
• pp.25-30
• /
• 2015

Purpose: The aim of this study was to examine the effects of abdominal muscle contraction thickness using real-time ultrasound imaging while applying an abdominal draw-in maneuver (ADIM) and pelvic floor muscle contraction (PFC) to low back pain patients and healthy subjects. Methods: The subjects were 21 young adults; a group of 10 low back pain patients and a control group of 11 healthy subjects. Measurements were made with the subjects on a pillow in a supine position, with the knee joints flexed at 60 degrees. While the two groups conducted ADIM and PFC, their transverse abdominal muscle (TrA), internal abdominal oblique muscle (IO), and external abdominal oblique muscle (EO) thicknesses were measured using an ultrasound imaging system. Result: The TrA muscle contraction thickness ratio during PFC and ADIM was significantly lower in the low back pain group than in the healthy group (p<0.05). The EO muscle contraction thickness ratio during ADIM was also significantly lower in the low back pain group than in the healthy group. The healthy group's muscle contraction thickness ratio was significantly lower during PFC than during ADIM in the TrA, IO, and EO (p<0.05). The low back pain group's muscle contraction thickness ratio was lower during PFC than during ADIM in the TrA, IO, and EO, but the difference was not statistically significant. Conclusion: The results of this study indicate that oral direction during ADIM induced an appropriate contraction of the TrA. Therefore, the procedure reported here may be applied during rehabilitation for appropriate contraction of the TrA.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.1
• /
• pp.39-45
• /
• 2022

In this paper, we propose methods to improve image-based auto-focus that can compensate for drawbacks of traditional auto-focus control. When adjusting the focus, there is a problem that the focus window cannot be set to the same position if the camera's LOS is not directed at the same location and flow or shake. To address this issue, we applied image tracking techniques to improve optimal focus localization accuracy. And also, although the same focus value should be calculated at the same focus step, but different values can be calculated by camera's fine shaking or image disturbance due to atmospheric scattering. To tackle this problem a SAFS (Stable Adjacency Frame Selection) has been proposed. As a result of this study, our proposed methodology shows more accurate than traditional methods in terms of finding best focus position.

• Journal of Applied Biological Chemistry
• /
• v.56 no.3
• /
• pp.141-146
• /
• 2013

Constituents of the essential oil (EO)s and hydrosol of rosemary (Rosmarinus officinalis L.) and lavender (Lavandula angustifolia Mill.) were analyzed by gas chromatography-mass spectrometry (GC-MS). The identified major constituents were ${\alpha}$-pinene (40.96%), camphor (34.44%), verbenone (45.31%), and camphor (67.04%) in rosemary EO, lavender EO, rosemary hydrosol, and lavender hydrosol, respectively. The antioxidant activity of EO and hydrosol extracted from rosemary and lavender were evaluated. Both EO showed di(phenyl)-(2,4,6-trinitrophenyl) iminoazanium (DPPH) and 2,2'-azino-bis(3-ethylbenzthiazoline-6-sulphonic acid) free radical scavenging activities as well as $Fe^{2+}$ ion chelating activity but no alkyl radical scavenging activity. Rosemary EO showed higher DPPH radical scavenging activity than lavender, whereas lavender EO showed higher $Fe^{2+}$ ion chelating activity. Both rosemary and lavender hydrosols showed alkyl radical scavenging activity, but only lavender hydrosol showed an activity on $Fe^{2+}$ chelating assay. Both rosemary and lavender hydrosols also protected the dermal fibroblast and the HaCaT keratinocytes against $H_2O_2$-induced cytotoxicity.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.4
• /
• pp.479-484
• /
• 2013

PURPOSE. The aim of this study was to evaluate the effects of additional acid etching and curing mechanism (light-curing or self-curing) of a composite resin on the dentin bond strength and compatibility of one-step self-etching adhesives. MATERIALS AND METHODS. Sixteen human permanent molars were randomly divided into eight groups according to the adhesives used (All-Bond Universal: ABU, Clearfil S3 Bond: CS3), additional acid etching (additional acid etching performed: EO, no additional acid etching performed: EX), and composite resins (Filtek Z-250: Z250, Clearfil FII New Bond: CFNB). Group 1: ABU-EO-Z250, Group 2: ABU-EO-CFNB, Group 3: ABU-EX-Z250, Group 4: ABU-EX-CFNB, Group 5: CS3-EO-Z250, Group 6: CS3-EO-CFNB, Group 7: CS3-EX-Z250, Group 8: CS3-EX-CFNB. After bonding procedures, composite resins were built up on dentin surfaces. After 24-hour water storage, the teeth were sectioned to make 10 specimens for each group. The microtensile bond strength test was performed using a microtensile testing machine. The failure mode of the fractured specimens was examined by means of an optical microscope at ${\times}20$ magnification. The data was analyzed using a one-way ANOVA and Scheffe's post-hoc test (${\alpha}$=.05). RESULTS. Additional etching groups showed significantly higher values than the no additional etching group when using All-Bond Universal. The light-cured composite resin groups showed significantly higher values than the self-cured composite resin groups in the Clearfil S3 Bond. CONCLUSION. The additional acid etching is beneficial for the dentin bond strength when using low acidic one-step self-etch adhesives, and low acidic one-step self-etch adhesives are compatible with self-cured composite resin. The acidity of the one-step self-etch adhesives is an influencing factor in terms of the dentin bonding strength and incompatibility with a self-cured composite resin.

• Defense and Technology
• /
• no.8 s.294
• /
• pp.64-71
• /
• 2003

Rooivalk에 채택된 항전장착물은 프랑스의 Sextant가 주 개발자이며 3개의 다기능 디스플레이를 갖는 NVG 호환 G-Cockpit도 포함된다. Thales는 Topowl HMSD도 공급하는데 이것은 Denel사 Cumulus 공장에서 개발된 센서 터렛과 Pilkington Optronics와 공동개발한 Noctua PNVS와 연계된다. Rooivalk의 TDATS는 Topowl과 함께 작동하는 Cumulus사 Argos-780 EO 센서 터렛을 사용하고 있고 열상장비, TV카메라, 레이저 거리측정기, 레이저 표식기 그리고 자동추적기로 구성되어 있다.

• Food Science and Preservation
• /
• v.8 no.4
• /
• pp.385-392
• /
• 2001

This study was to investigate the inhibiting effect of electrolyzed oxidizing (EO) water with/without freezing point depressing agents on polyphenol oxidase (PPO) activity of peeled chestnut. 0.85% sodium chloride, 0.5% citron and 0.5% lemon juice were used to freezing point depressing agents. The content of total phenolics was 13.36 mg% at the earlier stage of storage, and then suddenly increased at around 8∼1ldays. At the 11th day, PPO activity of untreated chestnut was 1,152 units, that was higher than any ethers. EO water adding lemon and citron juice showed synergistic effects on the enzyme inhibition, and their PPD activities were 143.3 and 180.22 units after 4 weeks, respectively. Sensory analysis showed that acceptance of peeled chestnuts was dependent on color and taste, which was related to PPO activity and sweetness. The peeled chestnut treated with EO water added citron or lemon juice tended to show the highest score fur acceptance.