• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.124-136
• /
• 2002

As an official journal of the Asian-Australasian Association of Animal Production Societies (AAAP), the Asian-Australasian Journal of Animal Sciences (AJAS) was born in February 1987 and the first issue (Volume 1, Number 1) was published in March 1988 under the Editorship of Professor In K. Han (Korea). By the end of 2001, a total of 84 issues in 14 volumes and 1,761 papers in 11,462 pages had been published. In addition to these 14 volumes, a special issue entitled "Recent Advances in Animal Nutrition" (April, 2000) and 3 supplements entitled "Proceedings of the 9th AAAP Animal Science Congress" (July, 2000) were also published. Publication frequency has steadily increased from 4 issues in 1988, to 6 issues in 1997 and to 12 issues in 2000. The total number of pages per volume and the number of original or review papers published also increased. Some significant milestones in the history of the AJAS include that (1) it became a Science Citation Index (SCI) journal in 1997, (2) the impact factor of the journal improved from 0.257 in 1999 to 0.446 in 2000, (3) it became a monthly journal (12 issues per volume) in 2000, (4) it adopted an English editing system in 1999, and (5) it has been covered in "Current Contents/Agriculture, Biology and Environmental Science since 2000. The AJAS is subscribed by 842 individuals or institutions. Annual subscription fees of US$ 50 (Category B) or US$ 70 (Category A) for individuals and US$ 70 (Category B) or US$ 120 (Category A) for institutions are much less than the actual production costs of US$ 130. A list of the 1,761 papers published in AJAS, listed according to subject area, may be found in the AJAS homepage (http://www.ajas.snu.ac.kr) and a very well prepared "Editorial Policy with Guide for Authors" is available in the Appendix of this paper. With regard to the submission status of manuscripts from AAAP member countries, India (235), Korea (235) and Japan (198) have submitted the most manuscripts. On the other hand, Mongolia, Nepal, and Papua New Guinea have never submitted any articles. The average time required from submission of a manuscript to printing in the AJAS has been reduced from 11 months in 1997-2000 to 7.8 months in 2001. The average rejection rate of manuscripts was 35.3%, a percentage slightly higher than most leading animal science journals. The total number of scientific papers published in the AJAS by AAAP member countries during a 14-year period (1988-2001) was 1,333 papers (75.7%) and that by non- AAAP member countries was 428 papers (24.3%). Japanese animal scientists have published the largest number of papers (397), followed by Korea (275), India (160), Bangladesh (111), Pakistan (85), Australia (71), Malaysia (59), China (53), Thailand (53), and Indonesia (34). It is regrettable that the Philippines (15), Vietnam (10), New Zealand (8), Nepal (2), Mongolia (0) and Papua New Guinea (0) have not actively participated in publishing papers in the AJAS. It is also interesting to note that the top 5 countries (Bangladesh, India, Japan, Korea and Pakistan) have published 1,028 papers in total indicating 77% of the total papers being published by AAAP animal scientists from Vol. 1 to 14 of the AJAS. The largest number of papers were published in the ruminant nutrition section (591 papers-44.3%), followed by the non-ruminant nutrition section (251 papers-18.8%), the animal reproduction section (153 papers-11.5%) and the animal breeding section (115 papers-8.6%). The largest portion of AJAS manuscripts was reviewed by Korean editors (44.3%), followed by Japanese editors (18.1%), Australian editors (6.0%) and Chinese editors (5.6%). Editors from the rest of the AAAP member countries have reviewed slightly less than 5% of the total AJAS manuscripts. It was regrettably noticed that editorial members representing Nepal (66.7%), Mongolia (50.0%), India (35.7%), Pakistan (25.0%), Papua New Guinea (25.0%), Malaysia (22.8%) and New Zealand (21.5%) have failed to return many of the manuscripts requested to be reviewed by the Editor-in-Chief. Financial records show that Korea has contributed the largest portion of production costs (68.5%), followed by Japan (17.3%), China (8.3%), and Australia (3.5%). It was found that 6 AAAP member countries have contributed less than 1% of the total production costs (Bangladesh, India, Indonesia, Malaysia, Papua New Guinea and Thailand), and another 6 AAAP member countries (Mongolia, Nepal and Pakistan, Philippine and Vietnam) have never provided any financial contribution in the form of subscriptions, page charges or reprints. It should be pointed out that most AAAP member countries have published more papers than their financial input with the exception of Korea and China. For example, Japan has published 29.8% of the total papers published in AJAS by AAAP member countries. However, Japan has contributed only 17.3% of total income. Similar trends could also be found in the case of Australia, Bangladesh, India, Indonesia, Malaysia and Thailand. A total of 12 Asian young animal scientists (under 40 years of age) have been awarded the AJAS-Purina Outstanding Research Award which was initiated in 1990 with a donation of US$ 2,000-3,000 by Mr. K. Y. Kim, President of Agribrands Purina Korea Inc. In order to improve the impact factor (citation frequency) and the financial structure of the AJAS, (1) submission of more manuscripts of good quality should be encouraged, (2) subscription rate of all AAAP member countries, especially Category B member countries should be dramatically increased, (3) a page charge policy and reprint ordering system should be applied to all AAAP member countries, and (4) all AAAP countries, especially Category A member countries should share more of the financial burden (advertisement revenue or support from public or private sector).

• Journal of Intelligence and Information Systems
• /
• v.20 no.1
• /
• pp.149-161
• /
• 2014

The export of domestic public services to overseas markets contains many potential obstacles, stemming from different export procedures, the target services, and socio-economic environments. In order to alleviate these problems, the business incubation platform as an open business ecosystem can be a powerful instrument to support the decisions taken by participants and stakeholders. In this paper, we propose an ontology model and its implementation processes for the business incubation platform with an open and pervasive architecture to support public service exports. For the conceptual model of platform ontology, export case studies are used for requirements analysis. The conceptual model shows the basic structure, with vocabulary and its meaning, the relationship between ontologies, and key attributes. For the implementation and test of the ontology model, the logical structure is edited using Prot$\acute{e}$g$\acute{e}$ editor. The core engine of the business incubation platform is the simulator module, where the various contexts of export businesses should be captured, defined, and shared with other modules through ontologies. It is well-known that an ontology, with which concepts and their relationships are represented using a shared vocabulary, is an efficient and effective tool for organizing meta-information to develop structural frameworks in a particular domain. The proposed model consists of five ontologies derived from a requirements survey of major stakeholders and their operational scenarios: service, requirements, environment, enterprise, and county. The service ontology contains several components that can find and categorize public services through a case analysis of the public service export. Key attributes of the service ontology are composed of categories including objective, requirements, activity, and service. The objective category, which has sub-attributes including operational body (organization) and user, acts as a reference to search and classify public services. The requirements category relates to the functional needs at a particular phase of system (service) design or operation. Sub-attributes of requirements are user, application, platform, architecture, and social overhead. The activity category represents business processes during the operation and maintenance phase. The activity category also has sub-attributes including facility, software, and project unit. The service category, with sub-attributes such as target, time, and place, acts as a reference to sort and classify the public services. The requirements ontology is derived from the basic and common components of public services and target countries. The key attributes of the requirements ontology are business, technology, and constraints. Business requirements represent the needs of processes and activities for public service export; technology represents the technological requirements for the operation of public services; and constraints represent the business law, regulations, or cultural characteristics of the target country. The environment ontology is derived from case studies of target countries for public service operation. Key attributes of the environment ontology are user, requirements, and activity. A user includes stakeholders in public services, from citizens to operators and managers; the requirements attribute represents the managerial and physical needs during operation; the activity attribute represents business processes in detail. The enterprise ontology is introduced from a previous study, and its attributes are activity, organization, strategy, marketing, and time. The country ontology is derived from the demographic and geopolitical analysis of the target country, and its key attributes are economy, social infrastructure, law, regulation, customs, population, location, and development strategies. The priority list for target services for a certain country and/or the priority list for target countries for a certain public services are generated by a matching algorithm. These lists are used as input seeds to simulate the consortium partners, and government's policies and programs. In the simulation, the environmental differences between Korea and the target country can be customized through a gap analysis and work-flow optimization process. When the process gap between Korea and the target country is too large for a single corporation to cover, a consortium is considered an alternative choice, and various alternatives are derived from the capability index of enterprises. For financial packages, a mix of various foreign aid funds can be simulated during this stage. It is expected that the proposed ontology model and the business incubation platform can be used by various participants in the public service export market. It could be especially beneficial to small and medium businesses that have relatively fewer resources and experience with public service export. We also expect that the open and pervasive service architecture in a digital business ecosystem will help stakeholders find new opportunities through information sharing and collaboration on business processes.

• Journal of Intelligence and Information Systems
• /
• v.19 no.1
• /
• pp.79-94
• /
• 2013

Recently, the high value added business is steadily growing in the culture and art area. To generated high value from a performance, the satisfaction of audience is necessary. The flow in a critical factor for satisfaction, and it should be induced from audience and measures. To evaluate interest and emotion of audience on contents, producers or investors need a kind of index for the measurement of the flow. But it is neither easy to define the flow quantitatively, nor to collect audience's reaction immediately. The previous studies of the group flow were evaluated by the sum of the average value of each person's reaction. The flow or "good feeling" from each audience was extracted from his face, especially, the change of his (or her) expression and body movement. But it was not easy to handle the large amount of real-time data from each sensor signals. And also it was difficult to set experimental devices, in terms of economic and environmental problems. Because, all participants should have their own personal sensor to check their physical signal. Also each camera should be located in front of their head to catch their looks. Therefore we need more simple system to analyze group flow. This study provides the method for measurement of audiences flow with group synchronization at same time and place. To measure the synchronization, we made real-time processing system using the Differential Image and Group Emotion Analysis (GEA) system. Differential Image was obtained from camera and by the previous frame was subtracted from present frame. So the movement variation on audience's reaction was obtained. And then we developed a program, GEX(Group Emotion Analysis), for flow judgment model. After the measurement of the audience's reaction, the synchronization is divided as Dynamic State Synchronization and Static State Synchronization. The Dynamic State Synchronization accompanies audience's active reaction, while the Static State Synchronization means to movement of audience. The Dynamic State Synchronization can be caused by the audience's surprise action such as scary, creepy or reversal scene. And the Static State Synchronization was triggered by impressed or sad scene. Therefore we showed them several short movies containing various scenes mentioned previously. And these kind of scenes made them sad, clap, and creepy, etc. To check the movement of audience, we defined the critical point, ${\alpha}$and ${\beta}$. Dynamic State Synchronization was meaningful when the movement value was over critical point ${\beta}$, while Static State Synchronization was effective under critical point ${\alpha}$. ${\beta}$ is made by audience' clapping movement of 10 teams in stead of using average number of movement. After checking the reactive movement of audience, the percentage(%) ratio was calculated from the division of "people having reaction" by "total people". Total 37 teams were made in "2012 Seoul DMC Culture Open" and they involved the experiments. First, they followed induction to clap by staff. Second, basic scene for neutralize emotion of audience. Third, flow scene was displayed to audience. Forth, the reversal scene was introduced. And then 24 teams of them were provided with amuse and creepy scenes. And the other 10 teams were exposed with the sad scene. There were clapping and laughing action of audience on the amuse scene with shaking their head or hid with closing eyes. And also the sad or touching scene made them silent. If the results were over about 80%, the group could be judged as the synchronization and the flow were achieved. As a result, the audience showed similar reactions about similar stimulation at same time and place. Once we get an additional normalization and experiment, we can obtain find the flow factor through the synchronization on a much bigger group and this should be useful for planning contents.

• Journal of Intelligence and Information Systems
• /
• v.27 no.1
• /
• pp.1-21
• /
• 2021

As the global business environment changes, uncertainties in technology development and market needs increase, and competition among companies intensifies, interests and demands for R&D activities of individual companies are increasing. In order to cope with these environmental changes, R&D companies are strengthening R&D investment as one of the means to enhance the qualitative competitiveness of R&D while paying more attention to facility investment. As a result, facilities or R&D investment elements are inevitably a burden for R&D companies to bear future uncertainties. It is true that the management strategy of increasing investment in R&D as a means of enhancing R&D capability is highly uncertain in terms of corporate performance. In this study, the structural factors that influence the R&D capabilities of companies are explored in terms of technology management capabilities, R&D capabilities, and corporate classification attributes by utilizing data mining techniques, and the characteristics these individual factors present according to the level of R&D capabilities are analyzed. This study also showed cluster analysis and experimental results based on evidence data for all domestic R&D companies, and is expected to provide important implications for corporate management strategies to enhance R&D capabilities of individual companies. For each of the three viewpoints, detailed evaluation indexes were composed of 7, 2, and 4, respectively, to quantitatively measure individual levels in the corresponding area. In the case of technology management capability and R&D capability, the sub-item evaluation indexes that are being used by current domestic technology evaluation agencies were referenced, and the final detailed evaluation index was newly constructed in consideration of whether data could be obtained quantitatively. In the case of corporate classification attributes, the most basic corporate classification profile information is considered. In particular, in order to grasp the homogeneity of the R&D competency level, a comprehensive score for each company was given using detailed evaluation indicators of technology management capability and R&D capability, and the competency level was classified into five grades and compared with the cluster analysis results. In order to give the meaning according to the comparative evaluation between the analyzed cluster and the competency level grade, the clusters with high and low trends in R&D competency level were searched for each cluster. Afterwards, characteristics according to detailed evaluation indicators were analyzed in the cluster. Through this method of conducting research, two groups with high R&D competency and one with low level of R&D competency were analyzed, and the remaining two clusters were similar with almost high incidence. As a result, in this study, individual characteristics according to detailed evaluation indexes were analyzed for two clusters with high competency level and one cluster with low competency level. The implications of the results of this study are that the faster the replacement cycle of professional managers who can effectively respond to changes in technology and market demand, the more likely they will contribute to enhancing R&D capabilities. In the case of a private company, it is necessary to increase the intensity of input of R&D capabilities by enhancing the sense of belonging of R&D personnel to the company through conversion to a corporate company, and to provide the accuracy of responsibility and authority through the organization of the team unit. Since the number of technical commercialization achievements and technology certifications are occurring both in the case of contributing to capacity improvement and in case of not, it was confirmed that there is a limit in reviewing it as an important factor for enhancing R&D capacity from the perspective of management. Lastly, the experience of utility model filing was identified as a factor that has an important influence on R&D capability, and it was confirmed the need to provide motivation to encourage utility model filings in order to enhance R&D capability. As such, the results of this study are expected to provide important implications for corporate management strategies to enhance individual companies' R&D capabilities.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.4
• /
• pp.460-470
• /
• 1985

Experiments were carried out to evaluate the standard gravity in determining potential kernel size and to determine the effective sampling way by analyzing intra - and inter - plant variations for some source and sink characters using eleven semi-dwarf indica and three japonica cultivars including four semi-dwarf indica nearisogenic lines. Also, additional experiments were conducted to understand yearly variation and variety x year interaction effects for ten characters related to source and sink and to characterize the varietal difference of pre- and post-heading self-competition employing three parental varieties and their F$\sub$5/ progenies in 1982 and 1983. It is desirable to determine the potential kernel size by average kernel wight of rice grains showing above 1.15 specific gravity. There was significant difference in leaf area per tiller, spikelets and sink capacity per panicle among vigorous, intermediate and inferior tillers classified by differentiated order and vigorousness. Although it was difficult to find out any significant difference in grain-fill ratio, ratio of perfectly ripened grain, potential kernel size and sink/source ratio between vigorous and intermediate tillers, there was big difference between them and inferior one. The coefficients of variation within each tiller-group for some characters related to source and sink were larger with the order of vigorous tillers < intermediate one '||'&'||'lt; inferior one, and the average heritability of all characters, evaluated by the ratio of varietal variance (equation omitted) to total variance (equation omitted), were higher with the order of inferior tillers '||'&'||'lt; intemediate one '||'&'||'lt; superior one. Therefore, it is desirable to sample the vigorous tillers to represent the varietal difference of these traits. '82-'83 year variations of three parental cultivars were significant for all traits except for leaf area/tiller, panicles/hill, leaf area index and rough rice yield. The characters showing highly significant variance of variety x year interaction were growth duration from transplanting to heading, leaf area/tiller, sink/source ratio, sink capacity/panicle and grain yield. Generalized yearly response of three parental varieties (Suweon 264, Raegyeong, IR1317-70-l) and their F$\sub$5/ progenies on the 1st and 2nd principal components extracted from ten source and sink characters generally exhibited reduction in both source and sink. However, there were diverse variety x year interactions such as progenies showing similar reaction with their parents and intermediate or recombinational yearly response with little or considerable yearly movement on the four-dimensional planes of the two upper principal components between 1982 and 1983. Sink characters revealing highly significant border effect were grain-fill ratio, spikelets and sink capacity per panicle. Among them the latter two especially showed significant variety x border effect interaction. Self-competition characterized by relative weakness of inside plant's sink characters compared to the border one was more severe during the reproductive stage before heading than maturing stage. Though the larger sink capacity per panicle generally disclosed the severer self-competition, some lines (like Suweon 264) revealed severe self-competition with small sink capacity while a few others showed tender self-competition in spite of big sink capacity per panicle.