• Korean Journal of Environmental Biology
• /
• v.36 no.4
• /
• pp.456-462
• /
• 2018

The purpose of this study was to assess cross-generational effects of bisphenol A exposure in benthic copepods, Tigriopus west. Nauplii (<24 hours old) were exposed to graded concentrations of bisphenol A, and toxicity end-points such as survival, development, sex ratio, and fecundity were measured. $F_1$ generations were grown under innoxious conditions, and similarly assessed. Significant differences were observed in development of nauplii and copepodites, between exposed and non-exposed copepods; however, there were no differences in survival of nauplii or copepodites, sex ratio, or brooding rate in parental generation. In contrast, in the $F_1$ generation, there were significant differences between the control group and exposed group in survival and development of nauplii. Length, width, and biomass of parental and $F_1$ generations were reduced in the exposed group compared to the control group. In addition, some deformities, such as swelling of the prosome, abnormally shaped egg sac, and dwarfism were observed after exposure to bisphenol A. So, our study demonstrates that a cross-generation toxicity test and monitoring of morphological deformities in harpacticoid copepods, can be useful for development of potential bioindicators for environmental monitoring, and assessment of chemical impact.

• International Journal of Concrete Structures and Materials
• /
• v.9 no.2
• /
• pp.133-143
• /
• 2015

This paper describes the test results and nonlinear analysis of reinforced concrete T-beams strengthened by bonded steel plates under increasing static loading conditions. The first part of this paper discusses the flexural tests on five T-beams, including the test model design (based on similarity principles), test programs, and test procedure. The second part discusses the nonlinear numerical analysis of the strengthened beams, in which a concrete damage plasticity model and a cohesive behavior were adopted. The numerical analysis results are compared with experimental data and show good agreement. The area of bonded steel plate and the anchor bolt spacing were found to have an impact on the cracking load, yield load, and ultimate load. An increase in the area of steel plate and a reduction of the anchor spacing could significantly improve the cracking and ultimate loads and decrease the damage of the beam.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.290-291
• /
• 2017

This study deals with an evaluation method for testing the robustness of the 4 kW commercial power electronic cooling system to the thermal environment. The power electronic cooling system consists of a cascaded push-pull DC / DC converter, a three-phase DC / AC inverter, and an electric compressor. The system manufactured by the thermal environment evaluation test (heat distribution test, thermal impact test, high temperature operation test, temperature cycle test, low temperature operation test) for the commercial electric power cooling system for commercial vehicle proves that it is robust against thermal environment.

• Journal of Environmental Impact Assessment
• /
• v.20 no.1
• /
• pp.61-69
• /
• 2011

Integrated stream naturalness based on abiotic and biotic factors were developed. Abiotic factors considered in this study were types of land use in the riparian area, river bank and high water bed streamside, revetment, bed substrate and artificial construction of streamside. Biotic factors included types of vegetation, assemblages of fish, macroinvertebrate, bird and mammal(Otter) in streams. The presence/absence of legal species and biological assessment index were also weighted as important parameters in this study. Scoring criteria selected for each matrix was five rating system; 1=poor, 2=moderate, 3=fair, 4=good, 5=excellent. Numerical ratings for the matrix were then summed. This resulted in a minimum score of 13 if all matrix at a site were poor, and a maximum score of 65 if all matrix were excellent. Five grade system from poor(I) to excellent condition(V) was employed. To verify its validity in natural environment, the evaluation system was applied to the Gapchun stream which is a test bed selected. Our result showed that stream naturalness of each reach was clearly distinguished by biotic and abiotic characteristics. Determination of correlation coefficient between abiotic and biotic factors was also high ($R^2=0.96$, p<0.05). In conclusion, assessment for stream naturalness reflecting abiotic and biotic factors was useful method representing stream integrated.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.288-292
• /
• 2017

BACKGROUND: Silicon tetrachloride reacts with moisture in the atmosphere to generate hydrogen chloride, which affects the environment. Since silicon tetrachloride and its by-products are dispersed in the atmosphere in a short time after the silicon tetrachloride release into the atmosphere, it is difficult to directly assess the extent of environmental impact. In the present study, the exposure test of silicon tetrachloride or hydrogen chloride was examined in order to establish the criterion of the range affected by the silicon tetrachloride release, and the actual crops in the area exposed to silicon tetrachloride leakage were analyzed. METHODS AND RESULTS: For the experiment of exposure to silicon tetrachloride or hydrogen chloride, the leaves of red-pepper and corn were used in glass sealed containers. In the actual accident area, 59 samples from 10 different kinds of crops were collected. The pretreatment of the sample was performed by freezing and grinding, and then extracted using distilled water. The pH and concentration of chloride ($Cl^-$) ion of the extracted solution were measured using pH meter and ion chromatograph, respectively. CONCLUSION: Exposure to silicon tetrachloride caused visible damage, increasing the concentration of chloride ion, and decreasing the pH as well as hydrochloric acid. In the actual crops of the affected area, the tendency was the same as the result of the laboratory test, and the range of influence could be estimated through the concentration of $Cl^-$ ion over 2,000 mg/kg, and the correlation evaluation between the concentration of $Cl^-$ and pH. Therefore, the concentration of $Cl^-$ ion and the correlation between $Cl^-$ and pH would be considered as the factors to estimate the influence range of silicon tetrachloride release.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.3
• /
• pp.323-331
• /
• 2020

The study aims to assess the impact of foreign direct investment (FDI) and international trade (export and import) on Vietnam's economic growth for the 2000-2018 period. Secondary data is taken from the General Statistics Office of Vietnam. Ordinary least-square method is used in analyzing the impact of FDI, export and import on economic growth of Vietnam. Empirical test results show that FDI and international trade are related to Vietnam's economic growth. However, each economic variable has a different impact. FDI has a positive and statistically significant influence on economic growth of Vietnam. Export also has positive and statistically significant impact to the economic growth, while import has a negative but not statistically significant effect. The result is useful for the policy makers of Vietnam on foreign economic relations. In order to improve the effect of FDI and international trade on growth of the economy, the government of Vietnam should: (1) continue applying preferential policies to attract FDI; (2) select foreign investors aiming to quality, efficiency, high technology and environmental protection; (3) continue pursuing export-oriented policy; (4) enhance the added value of exported goods and control the type of imported goods; (5) further liberalize trade through signing and implementation of international trade commitments.

• Structural Engineering and Mechanics
• /
• v.56 no.6
• /
• pp.917-938
• /
• 2015

The nonlinear numerical analysis of the impact response of reinforced concrete/mortar beam incorporated with the updated Lagrangian method, namely the Smoothed Particle Hydrodynamics (SPH) is carried out in this study. The analysis includes the simulation of the effects of high mass low velocity impact load falling on beam structures. Three material models to describe the localized failure of structural elements are: (1) linear pressure-sensitive yield criteria (Drucker-Prager type) in the pre-peak regime for the concrete/mortar meanwhile, the shear strain energy criterion (Von Mises) is applied for the steel reinforcement (2) nonlinear hardening law by means of modified linear Drucker-Prager envelope by employing the plane cap surface to simulate the irreversible plastic behavior of concrete/mortar (3) implementation of linear and nonlinear softening in tension and compression regions, respectively, to express the complex behavior of concrete material during short time loading condition. Validation upon existing experimental test results is conducted, from which the impact behavior of concrete beams are best described using the SPH model adopting an average velocity and erosion algorithm, where instability in terms of numerical fragmentation is reduced considerably.

• Journal of Environmental Impact Assessment
• /
• v.29 no.1
• /
• pp.61-77
• /
• 2020

In South Korea, major public waters have been systematic management under national level. Water environment network has been continuous monitoring for change of aquatic ecosystem, river and reservoir. In Water Quality Monitoring Networks, the data have been generally monitored Per eight days or month, while in Automatic Water Quality Monitoring Network the data have been monitored at daily intervals. Therefore, we were compared and analyzed water quality data between the networks using statistic method for same water quality item. Mann-kendall test results confirm that all points in Water Temperature (WT) and DO were not statistically significant. In particular, the result revealed that there is significant variation of TOC in the four different sites, TN in two different sites, TP in three different sites, WT in seven different sites, pH in two different sites between Water Quality Monitoring Network and Automatic Water Quality Monitoring Network. As a result firm LOWESS, TOC and pH clearly shows different trend. Among different sites, the water quality show the significantly positive correlations between at Sinam-Sangju2 and Namgang-Namgang4. Negative correlation significantly appeared in TP (ADD_Lower-AD1 site), TOC (DG-SG site), pH (GR-GR site), TP (JP-CN) and TN, TP, pH, EC, DO (GC-GC2-1 site).

• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.2
• /
• pp.181-190
• /
• 2011

The air pollutants from vehicle exhaust gas are affected by many factors including fuel qualities, engine and vehicle technologies, driving patterns. In particular, fuel qualities and after-treatment devices could directly affect the emission level of pollutants. The pollutant reduction characteristics that caused by enforced fuel quality standard were analyzed. Three types of test fuel were selected in accordance with Korean automotive fuel standard in 2006, 2009, 2012 and used for vehicle emission test in chassis dynamometer. European COPERT correction equation of fuel impact was considered as reference information to quantify the vehicle emission test results. The contribution rates of exhaust emission by COPERT correction equation showed that aromatic compounds and oxygen contents in gasoline fuel was most important. In case of diesel fuel, cetane index and polycyclic aromatic compounds accounted for the greater part. The exhaust emission effects by COPERT correction equation revealed that CO and VOC was increased 0.86%, 1.57% respectively in after 2009 gasoline when compared to before 2009 gasoline fuel. In case of light-duty diesel vehicle CO, VOC and PM were decreased in range of 3~7%. The result from this study could be provided for developing future fuel standards and be used to fundamental information for Korean clean air act.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.49-57
• /
• 2014

Purpose - The world now recognizes environmental disruption as a serious issue when regarding growth-oriented strategies; therefore, environmental preservation issues become pertinent. Consequently, green distribution is continuously emphasized. However, studying the prediction and association of distribution and the environment is insufficient. Most existing studies about green distribution are about its necessity, detailed operation methods, and political suggestions; it is necessary to study the distribution service industry and environmental service industry together, for green distribution. Research design, data, and methodology - ARIMA (auto-regressive moving average model) was used to predict the environmental service and distribution service industries, and the Granger Causality Test based on VAR (vector auto regressive) was used to analyze the causal relationship. This study used 48 quarters of time-series data, from the 4th quarter in 2001 to the 3rd quarter in 2013, about each business type's production index, and used an unchangeable index. The production index about the business type is classified into the current index and the unchangeable index. The unchangeable index divides the current index into deflators to remove fluctuation. Therefore, it is easy to analyze the actual production index. This study used the unchangeable index. Results - The production index of the distribution service industry and the production index of the environmental service industry consider the autocorrelation coefficient and partial autocorrelation coefficient; therefore, ARIMA(0,0,2)(0,1,1)4 and ARIMA(3,1,0)(0,1,1)4 were established as final prediction models, resulting in the gradual improvement in every production index of both types of business. Regarding the distribution service industry's production index, it is predicted that the 4th quarter in 2014 is 114.35, and the 4th quarter in 2015 is 123.48. Moreover, regarding the environmental service industry's production index, it is predicted that the 4th quarter in 2014 is 110.95, and the 4th quarter in 2015 is 111.67. In a causal relationship analysis, the environmental service industry impacts the distribution service industry, but the distribution service industry does not impact the environmental service industry. Conclusions - This study predicted the distribution service industry and environmental service industry with the ARIMA model, and examined the causal relationship between them through the Granger causality test based on the VAR Model. Prediction reveals the seasonality and gradual increase in the two industries. Moreover, the environmental service industry impacts the distribution service industry, but the distribution service industry does not impact the environmental service industry. This study contributed academically by offering base line data needed in the establishment of a future style of management and policy directions for the two industries through the prediction of the distribution service industry and the environmental service industry, and tested a causal relationship between them, which is insufficient in existing studies. The limitations of this study are that deeper considerations of advanced studies are deficient, and the effect of causality between the two types of industries on the actual industry was not established.