• The Journal of Asian Finance, Economics and Business
• /
• 제8권7호
• /
• pp.333-339
• /
• 2021

The study seeks to identify the determinants of the adoption of e-commerce by small and medium-sized enterprises (SMEs) in developing countries, in our case, in Indonesia. The aim of this study is to examine the factors influencing e-commerce adoption. This study uses the method of quantitative data collection based on a questionnaire survey of SMEs in Indonesia. The research relies on Regional Project stipulations regarding Business Development in Indonesia, to capture businesses with a range of 5 to 100 employees that are classified as SMEs. This study randomly chose 100 SMEs in Indonesia from the IndoNetwork database. Partial least square (PLS) structural model data processing was used for path coefficients analysis. Structural equation modeling is applied in this study to analyze the determinant factors on the e-commerce adoption. The study findings reveal that four factors, namely, perceived benefits, compatibility, technology readiness, and government support, significantly influence the adoption of e-commerce, whereas customer/supplier pressure does not have influence. So, this study concludes that perceived benefits, compatibility, technology readiness, and government support had a significant and positive relationship with e-commerce adoption. Meanwhile, customer/supplier pressure had no effect on the e-commerce adoption of by Indonesia SMEs.

• 한국군사과학기술학회지
• /
• 제24권3호
• /
• pp.317-327
• /
• 2021

Low Frequency Active Sonobuoy(hereinafter referred to as LFAS) are being developed in Korea in consideration of compatibility with existing overseas sonobuoys, and a communication device for acoustic signals receiving and operating control of LFAS has been developed. The communication device needs to verify compatibility with the existing Sonobuoy, and for this purpose, the standardized Sonobuoy communication protocol was applied. The communication device is designed/manufactured to transmit the acoustic signal received in real time from the Sonobuoy through VHF band RF communication to the data processing device, and transmit CFS/CSG commands for operation control to the Sonobuoy through UHF band RF communication. In order to verify the manufactured communication device, the communication status and performance were verified by interlocking test through Ultra Electronics' PASS-II equipment and domestically developed electronic device of Sonobuoy. In addition, operability was verified through environmental tests, water tanks, and marine operations. In the future, the communication device of sonobuoy can be used for verification of the Sonobuoy developed in Korea.

• 유통과학연구
• /
• 제20권8호
• /
• pp.33-46
• /
• 2022

Purpose: This study aims to understand the impact of e-commerce's advantage among SME's digital channel in Malaysia. To achieve the objective, this study used Technology, Organization, Environment (TOE) framework, Diffusion of Innovation (DOI) theory and Resource-Based View (RBV) theory. Research design, data and methodology: This study is quantitative method involve 195 SMEs online business in Malaysia. The integrated framework highlights the conceptual insight in multidimensional technology context (i.e. relative advantage, compatibility, and complexity); organizational context (i.e. top management support, innovation capability, branding capability, market-sensing capability, and human and organization capability); and environmental context (i.e. government support and supplier pressure). Results: The findings revealed that complexity, branding capability, human and organization capability, government support, and supplier pressure have significant positive relationship with e-commerce advantage. Meanwhile, relative advantage, compatibility, innovation capability, and market-sensing capability have significant negative relationship with e-commerce advantage. However, top management support has found no significant relationship with e-commerce advantage. Conclusions: The extended theoretical framework dimension improves existing knowledge on e-commerce advantage as well as the prospect of SMEs digital channel.

• Composites Research
• /
• 제35권6호
• /
• pp.419-424
• /
• 2022

Using non-biodegradable polymers is a severe environmental problem as they are not recyclable and generate a large amount of waste. Biopolymers, such as starch-based composites, have been considered one of the most promising replacement materials. These eco-friendly materials have the advantage of being low-cost, biodegradable, and obtained from renewable sources. However, as starch tends to be brittle and hydrophilic, it can make these materials unusable when exposed to water and limit its processability for further applications. In this work, a biobased modified starch was grafted using two bioderived materials, lauryl methacrylate (LMA) and tetrahydrofurfuryl methacrylate (THFMA), by radical polymerization. A polylactic acid (PLA) composite based on the modified starch (m-St) was fabricated to enhance its toughness. These samples were characterized by Fourier transform infrared, ¹H NMR and ¹³C NMR analysis, optical and scanning electron microscopy. The starch was successfully grafted, thus improving the compatibility with the PLA matrix. The mechanical properties of these films were also studied. Results from mechanical tests showed a slight enhancement of the mechanical performance of these composites when m-St was added to the PLA matrix. Such behavior is related to the improved dispersion of m-St 1:2 on PLA, confirmed by SEM images showing enhanced compatibility between modified starch and PLA matrix. This indicated excellent properties of the produced composite film for further eco-friendly applications.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제16권4호
• /
• pp.287-294
• /
• 2016

Purpose: Environment test support is urgent for small and medium defense companies in order to improve the reliability of weapons systems. Also, to reduce the burden of test costs, the voucher system must be strengthened. Quality assurance support should be accompanied by budget support. Methods: First of all, it is necessary to expand infrastructure for test equipment that suffers shortages by considering environmental test frequency and waiting periods to reduce the time required for environmental tests. Results: In regard to the environmental test, expansion for test equipment infrastructure, security of budget for the test, establishment of test plan, education and consulting support are required to resolve some limits of small and medium defense companies. Conclusion: Along with the opening of environmental test courses for industry operators, the expansion for consulting support projects of the defense industry support system is needed.

• 한국환경과학회지
• /
• 제22권10호
• /
• pp.1353-1361
• /
• 2013

The objectives of this paper are the characterization of the pretreatment of wastewater by microfiltration (MF) membranes for river maintenance and water recycling. This is done by investigation of the proper coagulation conditions, such as the types and doses of coagulants, mixing conditions (velocity gradients and mixing periods), pH, etc., using jar tests. The effluent water from a pore control fiber (PCF) filter located after the secondary clarifier at Kang-byeon Sewage Treatment Plant (K-STP) was used in these experiments. Two established coagulants, aluminum sulfate (Alum) and poly aluminum chloride (PAC), which are commonly used in sewage treatment plants to treat drinking water, were used in this research. The results indicate that the optimal coagulation velocity gradients (G) and agitation period (T) for both Alum and PAC were 200-250 $s^{-1}$ and 5 min respectively, but the coagulation efficiencies for both Alum and PAC were lower at low values of G and T. For a 60 min filtration period on the MF, the flux efficiencies ($J/J_0$ (%)) at the K-STP effluent that were coagulated by PAC and Alum were 92.9 % and 79.9 %, respectively, under the same coagulation conditions. It is concluded that an enhanced membrane process is possible by effective filtration of effluent at the K-STP using the coagulation-membrane separation process.

• 자원ㆍ환경경제연구
• /
• 제17권4호
• /
• pp.775-812
• /
• 2008

본 연구는 양도성개별할당량(individual transferable quota:ITQ)제도하에서 어획량 보고 시스템과 관련된 뉴질랜드의 독특한(unique) 어획량균형제도(Catch Balancing Regime)인 추정가치(deemed value) 시스템의 시행전략에 관한 한 이론적 모델을 제시한다. 본 논문에서 제시된 시행전략모델은 현시원칙(revelation principle)과 유인합치성(incentive compatibility)이론에 근거한 이론적 실증 분석에 기초한다. 분석 결과, 뉴질랜드에서 시행되고 있는 추정가치 시스템은 ITQ 제도하에서 지금껏 규제의 사각지대로 여겨졌던 부수어획(bycatch)과 불법투기(discarding), 그리고 남획(overfishing)과 같은 난제들을 통제 조정할 수 있는 가치 있는 제도적 메커니즘을 가지고 있는 것으로 나타났다. 다시 말해, 분석된 추정가치 시스템에 의한 어획량균형제도의 시행은 우선, 쿼타 보유자들의 어획보고에 대한 규제순응(regulatory compliance)을 향상시키고, 둘째, 어업의 감시 감독(surveillance monitoring)에 대한 비용을 안정화시키며, 셋째, 어자원의 지속적 효율적 관리에 대한 긍정적 유인을 제공한다.

• Steel and Composite Structures
• /
• 제33권1호
• /
• pp.67-79
• /
• 2019

Composite columns made of high strength materials have been used in high-rise construction owing to its excellent structural performance resulting in smaller cross-sectional sizes. However, due to the limited understanding of its structural response, current design codes do not allow the use of high strength materials beyond a certain strength limit. This paper reports additional test data, analytical and numerical studies leading to a new design method to predict the ultimate resistance of composite columns made of high strength steel and high strength concrete. Based on previous study on high strength concrete filled steel tubular members and ongoing work on high strength concrete encased steel columns, this paper provides new findings and presents the feasibility of using high strength steel and high strength concrete for general double symmetric composite columns. A nonlinear finite element model has been developed to capture the composite beam-column behavior. The Eurocode 4 approach of designing composite columns is examined by comparing the test data with results obtained from code's predictions and finite element analysis, from which the validities of the concrete confinement effect and plastic design method are discussed. Eurocode 4 method is found to overestimate the resistance of concrete encased composite columns when ultra-high strength steel is used. Finally, a strain compatibility method is proposed as a modification of existing Eurocode 4 method to give reasonable prediction of the ultimate strength of concrete encased beam-columns with steel strength up to 900 MPa and concrete strength up to 100 MPa.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.635-638
• /
• 2014

최근 시설원예분야 ICT융 복합 확산사업이 본격화함에 따라 관련 기술개발 및 시장이 확대되고 있다. 특히, 시설원예 복합 환경 제어장치에 대한 국내외 다양한 제품이 생산 판매되고 있지만, 제품 상호간의 호환성이 없으며 성능에서도 차이가 나는 것을 볼 수 있다. 이러한 환경에서 시설원예분야 ICT 융 복합 확산사업을 촉진하고 소비자에게 호환성 제품에 의한 편의성을 제공하기 위하여, 국내 제품과 시스템에 대한 규격 및 설치기준에 대한 표준을 제시할 필요가 있다. 따라서 본 논문에서는 국내의 시설원예 복합환경제어 장치의 도입 현황, 기술 및 표준화 동향 등을 분석하여 우리나라가 선도할 표준화 대상과제를 도출하고 향후 표준화 추진방향을 제시하고자 한다.

• 유통과학연구
• /
• 제11권8호
• /
• pp.15-23
• /
• 2013

Purpose - This is a case study aimed at finding a solution for improving the pallet loading efficiency in the process of delivering products through a transshipment using the T-11 and T-12 pallet systems. The study proposes a solution by demonstrating the case of a certain manufacturer A, who aims to reduce the logistics cost by using packaging sizes that are commonly applicable and can improve the compatibility between the T-11 pallet system, designated as the standard pallet in Korea, and the T-12 pallet system, which is commonly used in other foreign countries. The use of common sizes increases compatibility among the two systems and reduces both logistics and environmental costs. Thus, this case study calculates the quantitative benefits of applying common packaging sizes to improve the compatibility between the T-11 and T-12 pallet systems. These systems are considered to be the most important and widely used transportation systems in the global logistics industry. Research design, data, and methodology - This study examined manufacturer A's representative product and delivery system and assessed how manufacturer A was affected by the use of incompatible packaging sizes in the T-11 (1100 mm×1100 mm) and T-12 (1200mm×1000 mm) pallet systems, which were specified in the KS T 1002 standard. In addition, this study analyzed the impact of these packaging sizes on A's logistics cost. The TOPS program (Total Packaging System) was used to simulate pallet loading efficiency,and the main parameter studied was volume, as calculated from length, width, and height. Results - When the sizes of secondary packaging were not compatible across the T-11 and T-12 pallet systems, a reduction in loading efficiency was observed, leading to an increase in logistics cost during transshipment. Such low loading efficiencies led to a further loss of efficiency in transportation, storage and unloading. This may have a possible environmental impact with high social expenses, such as increased CO₂ emissions. Hence, this study proposed that the KS T 1002 standard be amended to include 21 packaging sizes, including 7 sizes of the 600 mm×500 mm category, which are compatible with both the T-11 and T-12 pallet systems. Conclusions - This study found that the 69 standard sizes under the T-11 pallet system and the 40 standard sizes under the T-12 system in the KS T 1002 standard can be simplified and reduced to 21 mutually compatible packaging sizes, enabling logistics standardization and reducing national-level logistics costs. If the government pays attention to this study and considers the standardization of common sizes for the T-11 and T-12 pallet systems and amends the KS T 1002 standard, this study will deliver practical value to the global logistics industry, apart from being of academic significance.