• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.188-191
• /
• 2003

Sing]e-well-push-pull tests were developed for use in assessing the feasibility of in-situ aerobic cometabolism of chlorinated aliphatic hydrocarbons (CAHs). The series includes Transport tests, Biostimulation tests, and Activity tests. Transport tests are conducted to evaluate the mobility of solutes used in subsequent tests. These included bromide or chloride (conservative tracers), propane (growth substrate), ethylene, propylene (CAH surrogates), dissolved oxygen (electron acceptor) and nitrate (a minor nutrient). Tests were conducted at an experimental well field of Oregon State University. At this site, extraction phase breakthrough curves for all solutes were similar, indicating apparent conservative transport of the dissolved gases and nitrate prior to biostimulation. Biostimulation tests were conducted to stimulate propane-utilizing activity of indigenous microorganisms and consisted of sequential injections of site groundwater containing dissolved propane and oxygen. Biostimulation was detected by the increase in rates of propane and oxygen utilization after each injection. Activity tests were conducted to quantify rates of substrate utilization and to confirm that CAH-transforming activity had been stimulated. In particular, the transformation of injected CAH surrogates ethylene and propylene to the cometabolic byproducts ethylene oxide and propylene oxide provided evidence that activity of the monooxygenase enzyme system, responsible for aerobic cometabolic transformations of CAHs had been stimulated. Estimated zero-order transformation rates decreased in the order propane > ethylene > propylene. The series of push-pu3l tests developed and field tested in this study should prove useful for conducting rapid, low-cost feasibility assessments for in situ aerobic cometabolism of CAHs.

• 한국지반환경공학회 논문집
• /
• 제3권4호
• /
• pp.37-49
• /
• 2002

본 연구에서는 고강도 고내구성 및 환경에 대한 안정성이 높은 주입재료를 주입재 형태별로 즉 현탁액형, 용액형 주입재에 배합설계를 실시하여 주입압, 지반조건에 따른 주입효과와 환경적 유해성을 분석 검토하고자 한다. 주입재 특성 및 주입효과에 대한 연구결과, 현탁액형 주입재에서는 초미립자시멘트가 보통시멘트에 비하여 상당히 높은 침투성 및 고결율을 나타냄을 알 수 있었고 용액형 주입재에 사용된 인산과 탄산수소나트륨의 경우 초미립자시멘트와 유사한 경향을 나타내었다. 주입된 고결체의 압축강도 시험결과, 현탁액형 주입재의 초미립자시멘트가 상당한 고강도를 나타났으나 용액형 주입재의 경우 현탁액형 주입재에 비하여 매우 낮은 강도를 나타내었다. 또한 주입재가 가지고 있는 환경적 유해성 여부를 평가하기 위해 대상시료를 주입재의 원재료 및 주입재의 고결시편의 양생일수에 따라 중금속 용출시험을 실시한 결과, 선정한 약액조합 및 고결체의 중금속 함량은 규제기준을 만족하였다.

• 대한토목학회논문집
• /
• 제30권2C호
• /
• pp.119-131
• /
• 2010

본 연구에서는 국내 해양오염 준설퇴적물을 활용한 시제품 제작 및 역학적, 환경적 실험을 통한 건설재료로서의 활용성을 조사하였다. 울산 방어진에서 수거한 준설토로 고화처리토 및 경량혼합토 공시체를 제작하여 압축특성 및 응력-변형 거동 등 물리적 특성을 파악하는 다양한 공학적 조사를 수행하였다. 해양오염토 유효활용을 위해 물리적 특성 외에 환경실험도 실시하였다. 제안된 준설토사 처리활용기준에 적용하였을 때는 구리성분 만이 활용가능기준을 약간 초과하였고 준설토 활용우려기준에는 모든 기준에 적합하여서 건설재료로 재활용하여도 환경적인 유해성은 없는 것으로 나타났다. 매립복토재로서 활용성 검토를 위한 준설토의 입도분석, 다짐시험, 아터버그 한계시험, 비중시험 및 단위중량시험 등을 수행한 결과, 모든 조건의 고화처리토는 매립작업을 원활히 하기위한 강도(대략 50kPa)를 만족하였다.

• 한국실내디자인학회논문집
• /
• 제14권5호
• /
• pp.151-158
• /
• 2005

This study comparatively examined the environmental affordance of elementary children's rooms between the lower and the higher grades, and investigated the affects of the rooms'affordance on children's satisfaction of the rooms. Survey questionnaires were given to 412 elementary school children(221 in the lower grades and 191 in the higher grades), including their parents. Frequency analysis, $x^{k}$ -tests, t-tests, correlation tests, and regression analysis were mainly employed for the data analysis. The findings indicated that the environmental affordance of the children's rooms differed in each group in terms of the four dimensions: Social interaction, privacy, safety, and uniqueness. Meanwhile, the more environmental affordance was sufficient, the higher degree of the satisfaction was showed. In the lower grades, conveniency, accessibility, social interaction, and uniqueness were influenced their satisfaction of the rooms, whereas social interaction, conveniency, order, and privacy were affected the children's satisfaction in the higher grades.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.605-612
• /
• 2008

The shear wave velocity ($V_s$) has been commonly used to evaluate the dynamic properties of soil. The field $V_s$ probe (FVP) was already developed to assess the shear stiffness of a soft clay. The objective of this study is to investigate the disturbance effects of the FVP due to the penetration. The laboratory tests are conducted in a large-scale consolidometer (calibration chamber). The reconstituted clay is mixed at the water content of 110% using a slurry mixer. The FVP and down-hole test are carried out every 1cm interval to compare the data. In addition, two square rods with transducers are also implemented to get the reference value. The shear waves evaluated by the FVP, dow-hole tests, and reference rods are closely matched. This study suggests that the disturbance effect of the FVP due to the penetration into the soft clay soils is small enough and the $V_s$ evaluated by the FVP reflects well the in-situ characteristics. Furthermore, the combination of the FVP and down-hole test shows the possibility of hybrid equipment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.189-198
• /
• 2008

Lots of roadway tunnel have been almost constructed in forms of closely-spaced tunnel in korea. If closely-spaced tunnel is not constructed at a sufficient distance between tunnels, the problem of stability can occur. However, the case that can not secure a sufficient distance between tunnels can occur due to a difficulty in buying a lot and an issue of popular complaint and environmental disruption. Generally, tunnels are not influenced by each other when a center distance between tunnels is two times longer than tunnel diameter under the complete elastic ground and five times under the soft ground. In this study, the scaled model tests of closely-spaced tunnel by using homogeneous material were performed and induced displacements were measured around the tunnel openings during excavation. The influence of distance between tunnels on the behavior of closely-spaced tunnel was investigated.

• Wind and Structures
• /
• 제20권5호
• /
• pp.683-699
• /
• 2015

Lighting poles and antenna masts are typically high, slender and light structures. Moreover, they are often characterized by distributed eccentricities that make very complex their shape. Experience teaches that this structural type frequently suffers severe damage and even collapses due to wind actions. To understand and interpret the aerodynamic and aeroelastic behavior of lighting poles and antenna masts, this paper presents the results of static and aeroelastic wind tunnel tests carried out on a complex prismatic element representing a segment of the shaft of such structures. Static tests are aimed at determining the aerodynamic coefficients and the Strouhal number of the test element cross-section; the former are used to evaluate the critical conditions for galloping occurrence based on quasi-steady theory; the latter provides the critical conditions for vortex-induced vibrations. Aeroelastic tests are aimed at reproducing the real behavior of the test element and at verifying the validity and reliability of quasi-steady theory. The galloping hysteresis phenomenon is identified through aeroelastic experiments conducted on increasing and decreasing the mean wind velocity.

• 한국안전학회지
• /
• 제26권6호
• /
• pp.31-44
• /
• 2011

This paper has presented a finite element analysis of structural behaviour of box culvert during and after fires. The fire tests were carried out in a furnace on RC slabs using the ISO 834 standard fire curve. The load capacity after cooling of the RC slab that was not loaded during the fire tests was evaluated by means of additional 3 points bending tests. In the past, stress-strain models of concrete under fire loading have been proposed by several researchers. Comparisons are made with the load-displacement relations of RC slabs after fire loading using the existing stress-strain models with temperature, such as Schneider, EUROCODE 2, Lie, Shi and Nan model. By comparing the load-displacement relations, Lie model was found to result in a maximum load about 2.0% higher than that of test. Based on the fire test results of RC slabs, this paper presents an extensive analytical study on the fire response of box culvert during and after fires.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.59-69
• /
• 2019

Grout injection is mainly used for permeability reduction and/or improvement of the ground by injecting grout material into pores, cracks, and joints in the ground. The oscillatory grout injection method was developed to enhance the grout penetration. In order to verify the level of enhancement of the grout, field grout injection tests, both static and oscillatory tests, were performed at three job sites. The enhancement in the permeability reduction and ground improvement effect was verified by performing a core boring, borehole image processing analysis, phenolphthalein test, scanning electron microscopy analysis, variable heat test, Lugeon test, standard penetration test, and an elastic wave test. The oscillatory grout injection increased the joint filling rate by 80% more and decreased the permeability coefficient by 33-68%, more compared to the static grout injection method. The constrained modulus of the jointed rock mass was increased by 50% more with oscillatory grout injection compared to the static grout injection, indicating that the oscillatory injection was more effective in enhancing the stiffness of the rock mass.

• Geomechanics and Engineering
• /
• 제33권4호
• /
• pp.327-339
• /
• 2023

The expansion capacity and strength of expansive grout have a significant influence on the stress state of a supported rock mass and the strength of a grout-rock mass structure. The expansion and strength characteristics are vital in grouting preparation and application. To analyze the expansion performance and mechanical properties of expansive grout, uniaxial compressive strength (UCS) tests, expansion ratio tests, XRD, SEM, and microscopic scanning tests (MSTs) of expansive grout under different curing pressure conditions were conducted. The microevolution was analyzed by combining the failure characteristics, XRD patterns, SEM images, and surface morphologies of the specimens. The experimental results show that: (1) The final expansion ratio of the expansive grout was linear with increasing expansion agent content and nonlinear with increasing curing pressure. (2) The strength of the expansive grout was positively correlated with curing pressure and negatively correlated with expansion agent content. (3) The expansion of expansive grout was related mainly to the development of calcium hydroxide (Ca(OH)2) crystals. With an increase in expansion agent content, the final expansion ratio increased, but the expansion rate decreased. With an increase in the curing pressure, the grout expansion effect decreased significantly. (4) The proportion of the concave surfaces at the centre of the specimen cross-section reflected the specimen's porosity to a certain extent, which was linear with increasing expansion agent content and curing pressure.