• Journal of the Korean Geotechnical Society
• /
• v.24 no.5
• /
• pp.89-98
• /
• 2008

In this study, the behaviour of an unsaturated soil was analyzed by performing $K_0$ consolidated triaxial tests. Unsaturated triaxial tests were performed with matric suctions for weathered soils and stress paths under consolidation and stress-strain relationships under shear were obtained. As a result, the $K_0$ value decreased as the matric suction increased. Besides, both isotropic and $K_0$ conditions had similar shear strength envelopes at the same matric suction. Especially, strength parameters could be obtained by stress variables used in the critical state theory more reasonably than by those of Mohr circles at failure.

• Journal of Korean Society of Forest Science
• /
• v.97 no.5
• /
• pp.552-554
• /
• 2008

Acer palmatum was selected and its responses to elevated ozone were subsequently measured during growing periods. Ozone concentration of this study was compared to the calculated AOT40 value. A. palmatum had significantly many but small stomata size to the ozone stress. The length of stomata of A. palmatum was reduced from 5.6 to $5.0{\mu}m$ to the ozone exposure. However, the number of stomata (density) was increased from 102 to 131 in the $500{\times}500{\mu}m$ leaf area.

• Journal of Environmental Science International
• /
• v.3 no.1
• /
• pp.49-56
• /
• 1994

Effect of the liquid circulation velocity on the biofilm development was investigated in an inverse fluidized bed biofilm reactor(IFBBR). To observe the effect of the influent COD concentration on biofilm simultaneously, the influent COD value was adjusted to 1000mg/1 f for 1st reactor, and 2500mg/l for 2nd reactor. The liquid circulation velocity was adjusted by controlling the initial liquid height. As the liquid circulation velocity was decreased, the settling amount of biomass was increased and the amount of effluent biomass was decreased. Since the friction of liquid was decreased by the decrease of liquid circulation velocity, the biofilm thickness was increased and the biofilm dry density was decreased. In the 1st reactor the SCOD removal efficiency was constant regardless of the variation of the liquid circulation velocity, but it was increased by the decrease of the liquid circulation velocity because of more biomass population in 2nd reactor.

• Korean Journal of Environmental Biology
• /
• v.18 no.4
• /
• pp.377-385
• /
• 2000

This study was carried out to investigate the ecotoxicological response on Gammarus sobaegensis Ueno with acid stress. Mean value of $LT_{50}$ (lethal time 50%) under pH 3 condition as acute ecotoxicity test was observed to be 0.271 ($\pm$0.146) day. And 0.812 ($\pm$0.377) day under pH 4, respectively. Mean value of $LT_{50}$ under pH 3 and 5 were 6.313 ($\pm$0.828), and 9.475 ($\pm$4.881) day, respectively. Variance in chronic ecotoxicity test pH (F ratio: 11.240, P< 0.0005) and times (F ratio: 2.916, P< 0.0005) as single factor were revealed to be the major factor for determining LT$_{50}$ with acid depression. The variation of secondary gill surface with acid stress to be certain that wrinkle phenomenon. Being weak tolerance of G. sobaegensis against the acid stress, it shows the possibility to be examined as an aquatic toxicity test organism.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.5-9
• /
• 2013

Recently, eco-friendly sources of energy by fuel cells that use hydrogen as an energy source has emerged as the next generation of energy to solve the problem of environmental issues and exhaustion of energy. A solid oxide fuel cell(SOFC) classified based on the type of ion transfer mediator electrolyte has actively being researched. However, the reliability according to the thermal cycle is low during the operation of the fuel cell, and deformation problem comes from the difference in thermal expansion coefficient between the electrode material, the components made of ceramic material is also brittle, which means disadvantages in terms of the strength. Therefore, in this study, considering the states of the manufacturing and operating of SOFC single cells, the stress analyses in the each of the interfacial layer between the anode, electrolyte and the cathode were performed to get the basic data for reliability assessment of SOFC. The obtained results show that von Mises stress according to the thickness direction on operating state occurred maximum stress value in the electrolyte layer. And also the stresses inside the active area on a distance of 1 ${\mu}m$ from the electrode interface were estimated. Futhermore the evaluation was done for the variation of the stress according to the stage of the operation divided into three stages of manufacturing, stack, and operating.

• Journal of Environmental Science International
• /
• v.11 no.10
• /
• pp.1023-1030
• /
• 2002

The effects on photosynthesis of NaCl(0, 0.2, 0.4, 0.6, 0.8 or 1.0 M) were examined in etiolated barley seedlings. Chlorophyll(Chl) a, Chl b and carotenoid contents, Chl a fluorescence and quenching coefficients of Chl fluorescence have been determined in the primary leaves of etiolated barley seedlings cultivated under low light(60 $\mu$㏖ $m^{-2}\;s^{-1}$). Chl a, b, and carotenoid contents were decreased remarkably in comparison with the control at 0.4 M NaCl. However, the value of Fo and Fv were decreased at 0.6 M NaCl and the ratio of Fv/Fm were deceased at 1.0 M NaCl. Chlorophyll synthesis was seriously inhibited from 0.4 M NaCl, and the photosynthetic electron transport system was inhibited from 0.6 M NaCl. Quantum of photosystem II reaction center was inhibited at 1.0 M NaCl. The effects of NaCl on the Chl content were raised in a 6 hrs, but the effects of NaCl on the value of Fo, Fv and Fv/Fm were raised in 30 hrs. The value of qP was decreased in comparison with the control at all concentrations, but there was a small change in the value qE. These results provide evidence that NaCl inhibited effects of various concentration of NaCl were inhibited quinone redox, however, proton gradient between thylakoid membranes was little damaged.

• Korean Journal of Environmental Biology
• /
• v.23 no.2 s.58
• /
• pp.206-213
• /
• 2005

The diurnal and seasonal variations of antioxidative enzyme activity and the O-J-I-P transients were investigated from the leaves of Crinum asiaticum var. japonicum under winter stress in natural habitat, in order to diagnose quantitatively physiological states of plants under stresses. The activities of superoxide dismutase and peroxidase increased slightly in winter. Especially, peroxidase acitivity was higher at dawn and night in winter and some isoforms were detected only in early winter. In the O-J-I-P transients, the fluorescence intensity of J, I, P steps decreased significantly in winter season, contrary to its high value in summer season. Of the chlorophyll fluorescence parameters derived from the O-J-I-P transients, Fm and $\Phi_{po}$ decreased with the increase of ABS/RC depending on temperature drop in winter.

• Health Policy and Management
• /
• v.10 no.3
• /
• pp.129-154
• /
• 2000

This study aims at providing the basic data necessary for developing a model of and the policies for the improved quality of life of the adult population by measuring and analyzing factors affecting the quality of life based on a WHOQOL-Bref survey of 1,200 persons above the age of 20 residing in Taegu Metropolitan City area. 1. The factors affecting their quality of life were measured as follows: The physical conditions got the highest point of 3.31 while the psychological conditions got 3.20 and the environmental conditions got the lowest point of 3.09. The overall quality of life was rated to be at 3.11 2. General conditions affecting the quality of life, such as the economic conditions, health conditions and stress all turned out to be variables having significant differences(p〈0.01) in all the factors affecting the quality of life. 3. Through the analysis, we also found out the positive correlation exists among all the factors determining the quality of life(p〈0.01), while the psychological factor turning out to have the highest correlation value(r=0.640) with the overall quality of life. 4. To find out the factors affecting all the aspects of quality of life, we also conducted a multiple regression analysis employing the general characteristics as an independent variable. The health, economic and stress conditions all turned out to be significant in all aspects(p〈0.01). Summarizing the above analysis, the quality of life has a high correlation with the psychological, physical and environmental conditions. It has also turned out that the health, economic and stress conditions have the greatest influence on the quality of life. Therefore, it is believed to be necessary that a comprehensive program be developed to promote the public health and to formulate a model for improvement of the people's quality of life that can enhance their physical, psychological and social health conditions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.3
• /
• pp.334-340
• /
• 2019

Objective: The objective of this study was to investigate the genetic components of daily milk yield and to re-rank bulls in South Korea by estimated breeding value (EBV) under heat stress using the temperature-humidity index (THI). Methods: This study was conducted using 125,312 monthly test-day records, collected from January 2000 to February 2017 for 19,889 Holstein cows from 647 farms in South Korea. Milk production data were collected from two agencies, the Dairy Cattle Genetic Improvement Center and the Korea Animal Improvement Association, and meteorological data were obtained from 41 regional weather stations using the Automated Surface Observing System (ASOS) installed throughout South Korea. A random regression model using the THI was applied to estimate genetic parameters of heat tolerance based on the test-day records. The model included herd-year-season, calving age, and days-in-milk as fixed effects, as well as heat tolerance as an additive genetic effect, permanent environmental effect, and direct additive and permanent environmental effect. Results: Below the THI threshold (${\leq}72$; no heat stress), the variance in heat tolerance was zero. However, the heat tolerance variance began to increase as THI exceeded the threshold. The covariance between the genetic additive effect and the heat tolerance effect was -0.33. Heritability estimates of milk yield ranged from 0.111 to 0.176 (average: 0.128). Heritability decreased slightly as THI increased, and began to increase at a THI of 79. The predicted bull EBV ranking varied with THI. Conclusion: We conclude that genetic evaluation using the THI function could be useful for selecting bulls for heat tolerance in South Korea.

• Electrical & Electronic Materials
• /
• v.10 no.6
• /
• pp.519-527
• /
• 1997

The micro crack was occurred where the stress concentrated by the thermal stress which was induced during the cooling period after molding process or by the various reliability tests. In order to estimate the possibility of development from inside micro crack to outside fracture, the fracture toughness of EMC should be measured under the various applicable condition. But study was conducted very rarely for the above area. In order to provide a was to decide the fracture resistance of EMC (Epoxy Molding Compound) of plastic package which is produced by using transfer molding method, measuring fracture is studied. The specimens were made with various EMC material. The diverse combination of test conditions, such as different temperature, temperature /humidity conditions, different filler shapes, and post cure treatment, were tried to examine the effects of environmental condition on the fracture toughness. This study proposed a way which could improve the reliability of LOC(Lead On Chip) type package by comparing the measured $J_{IC}$ of EMC and the calculated J-integral value from FEM(Finite Element Method). The measured $K_{IC}$ value of EMC above glass transition temperature dropped sharply as the temperature increased. The $K_{IC}$ was observed to be higher before the post cure treatment than after the post cure treatment. The change of $J_{IC}$ was significant by time change. J-integral was calculated to have maximum value the angle of the direction of fracture at the lead tip was 0 degree in SOJ package and -30 degree in TSOP package. The results FEM simulation were well agreed with the results of measurement within 5% tolerance. The package crack was proved to be affected more by the structure than by the composing material of package. The structure and the composing material are the variables to reduce the package crack.ack.