• Journal of the Korea Society of Computer and Information
• /
• v.7 no.3
• /
• pp.23-29
• /
• 2002

The design of data processing of GIS requires efficient method with analysis procedure. This system is easy to be used and managed for presenting route according to conditions as a graphic user interface environmental window system by applying three tiers based object-oriented method. The tier of data is in charge of a class for the exchange, extraction and conservation of data between GeoMedia and application tiers. A route selection algorithm was applied to application tiers, considering all conditions which are necessary for the route selection between a beginning point and an end point, and it was added by module such as data handing, road condition, buffering, clothoid and AHP to select the alternative route followed by new condition. The user tier can express the data acquired by an application tier. Thus three tiers based architecture was presented by implementing design of GIB data processing for its efficiency.

• Journal of Adhesion and Interface
• /
• v.22 no.4
• /
• pp.153-157
• /
• 2021

Graphene, a two-dimensional carbon allotrope, has outstanding mechanical and electrical properties. In particular, the charge carrier mobility of graphene is known to be about 100 times higher than that of silicon, and it has received attention as a core material for next-generation electronic devices. However, graphene is very sensitive to environmental conditions, especially vulnerable to moisture or oxygen. It becomes a disadvantage in that the stability of the graphene-based electronic device, so various attempts are being made to solve this problem. In this work, we report a method to greatly improve the stability by controlling the surface energy of the polymer layer used for transferring the insulating layer of the graphene field-effect transistor. As the surface energy of the polymer used as the insulating layer was lowered, the stability could be improved by effectively controlling the adsorption of impurities in the atmosphere such as water molecules or oxygen.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.3
• /
• pp.266-273
• /
• 2021

Objective: The objective of this study was to suggest improvement methods for investigations and systems through a review of musculoskeletal risk factor investigation reports conducted in the workplace. Methods: A total of 34 reports on musculoskeletal risk factor investigations were reviewed. To confirm the appropriateness of the evaluation, reevaluation was conducted through a field investigation using other evaluation tools. In order to understand the effectiveness of the improvement plan, a survey was conducted with those in charge of tasks with ergonomic burdens. Results: As a result of performing a field survey using the work sampling method recommended by the KOSHA (Korea Occupational Safety and Health Agency) for ten tasks, eight tasks were determined to pose an ergonomic burden. When 30 tasks were evaluated with RULA (rapid entire body assessment), 90% of them were evaluated at a higher level than the results of the workplace survey. Among the improvement measures, only 36% of the field workers affirmed them, and in only 19% of the workplaces were actual improvements made. Conclusions: In order to improve the ergonomic investigation system for risk factors in the ergonomic burden task, it is necessary to secure the objectivity of the evaluation performed by the institution and enable the active participation of workers in improvement activities.

• Journal of Climate Change Research
• /
• v.8 no.4
• /
• pp.313-327
• /
• 2017

Korea has introduced Korea Emissions In 2015, the United Nations Conference on Climate Change (COP21) was held in Paris. The Paris Agreement indicates that all nations are in charge of mitigating climate change. Prior to COP21, 197 Parties submitted the Nationally Determined Contributions (NDCs), which are greenhouse gas reduction targets. On June 30, 2015, Korea also submitted an NDC target of 37% reduction compared to BAU in 2030. However, Korea's NDC was evaluated as "Inadequate" by the Climate Action Tracker (CAT). In addition, the domestic environmental group expressed a negative opinion as well. In view of this situation, it is necessary to conduct an objective assessment of quantitative analysis of NDC goals in Korea. The goal of this study is to evaluate NDC of Korea by comparing with those of OECD member countries. For comparative analysis, data such as population, GDP, primary energy supply affecting GHG emissions were obtained from the OECD homepage. The results indicate that emission reduction goal of 37% of Korea was $4^{th}$ highest goal among OECD member countries. If Korea achieves the emission reduction goal, the greenhouse gas emissions per capita in 2030 are $10^{th}$among OECD member countries. The greenhouse gas emissions per GDP are $13^{th}$, and emissions per TOE are $9^{th}$ among OECD member countries. The results show that greenhouse gas intensity of Korea is relatively high among OECD member countries. Therefore, it is needed to continuously endeavor to reduce greenhouse gas emissions to mitigate the global climate change. This study can be further used as a fundamental document to establish the future greenhouse reduction policy in Korea.

• Journal of Climate Change Research
• /
• v.8 no.3
• /
• pp.265-273
• /
• 2017

Recently the Paris Climate Change Accord has been officially put into effect, making global efforts to implement Greenhouse Gas (GHG) reductions, and also International environmental regulations in the automotive sector will be further strengthened. The electric vehicle, which minimizes the particulate matter generated by existing internal combustion engine automobiles, is evaluated as a representative eco-friendly automobile. However, charging the battery of an electric vehicle is not fully environment-friendly if it is fueled by electricity that is being generated by fossil fuels as an energy source. The energy generated by the photovoltaic power generation system, which is an infinite clean energy, can be used to charge an electric vehicle's battery. Currently, shortage of charging facilities, time of charging, and high battery prices are the problem of activating the supply of electric vehicles. This study is to build a conjunction between the EVBSS (Electric Vehicle Battery Supply System) and ESS (Energy Storage System), which can quickly supply the photovoltaic charged battery to the required demand. If the charged battery in the Battery Swapping Station (BSS) is swapped swiftly, it will dramatically shorten the waiting time for charging the battery. As a result, if the battery is rented when it is needed, electric vehicles can be sold without the cost of a battery, which accounts for a large portion of the total cost, then the supply of electric vehicles are expected to expand. Furthermore, it will be an important alternative to maneuver climate change by minimizing GHG emissions from internal combustion engine vehicles.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.45-53
• /
• 2019

As the urbanization progresses, the demand for parking in large cities surges compared with that for parking lots. However, the space for securing a parking lot in a large city is physically limited and a budget problem also arises. Therefore, a shared parking system that can utilize existing parking lots is becoming important. This study was carried out to analyze the parking area efficiently for the residents parking area. As a result of the questionnaire survey, it was the most frequent passage to work / commuting and business purposes. The most important factors in parking were 'Parking charge', 'Walking distance to the destination after parking', 'Parking lot searching time' Approximately 46 % of the respondents were female. As a result of the quantitative analysis of the factors influencing the potential use of the intention to use as a dependent variable, it was analyzed that the policy was effective to reduce the parking fee to less than 500 won per 10 minutes and take about 3-6 minutes to search.

• Journal of Korean Society on Water Environment
• /
• v.34 no.6
• /
• pp.621-631
• /
• 2018

In this study, catalyst was made through incipient wetness method using palladium (Pd) as noble metal, indium (In) as secondary metal, and montmorillonite (MK10) and Al pillared montmorillonite (Al-MK10) as supporters. The nitrate reduction rate of the catalysts was measured by batch experiments where H2 gas was used as reducing agent and formic acid as pH controller. Transmission electron microscopy (TEM) equipped with energy dispersive spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) were all used to determine the elemental distribution of Pd, In, Al, and Si on catalysts. It was observed that Al pillaring increased the Al/Si elemental composition ratio and point of zero charge of MK10, but decreased its BET specific surface area and pore volume. The nitrate reduction rate of Al-MK10 Pd/In was 2.0 ~ 2.5 times higher than that of MK10 Pd/In using artificial groundwater (GW) in ambient temperature and pressure. Nitrate reduction rates in GW were 1.2 ~ 1.7 times lower than those in distilled deionized water (DDW). Nitrate reduction rates in acidic conditions were higher than those in neutral condition in both GW and DDW. The amount of produced NH3-N over degraded NO3- at acid conditions was lower than that of neutral condition. Even though the leaching of Pd after reaction was measured in DDW it was not detected when both Al-MK10 Pd/In and MK10 Pd/In were used in GW. The modification of montmorillonite as a supporter significantly increased the reductive catalytic activities of nitrates. However, the ratio of producing ammonia by-products to degraded nitrates in ambient temperature and pressure was similar.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.753-767
• /
• 2020

The commercial value of strawberries is affected by various factors such as their shape, size and color. Among them, size determined by weight is one of the main factors determining the quality grade of strawberries. In this study, image technology was developed to predict the weight of strawberries using the shape characteristics of strawberry cultivars. For realtime weight measurements of strawberries in transport, an image measurement system was developed for weight prediction with a charge coupled device (CCD) color camera and a conveyor belt. A strawberry weight prediction algorithm was developed for three cultivars, Maehyang, Sulhyang, and Ssanta, using the number of pixels in the pulp portion that measured the strawberry weight. The discrimination accuracy (R2) of the weight prediction models of the Maeyang, Sulhyang and Santa cultivars was 0.9531, 0.951 and 0.9432, respectively. The discriminative accuracy (R2) and measurement error (RMSE) of the integrated weight prediction model of the three cultivars were 0.958 and 1.454 g, respectively. These results show that the 2D imaging technology considering the shape characteristics of strawberries has the potential to predict the weight of strawberries.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.5
• /
• pp.71-78
• /
• 2018

This study seeks to identify elements of spatial planning for areas surrounding children's parks in order to improve child safety. It will identify different aspects of child safety and extract elements of safety planning for the areas surrounding children's parks from a literature review of both domestic and international research. The study classifies the space between one's residence and the children's park as either a "means of access", such as pedestrian walkways and streets, or a "boundary", which consists of the entrance, exit, and fences; then, the derived safety planning elements were categorized in accordance with this classification. In order to ensure the validity of the planning elements, an expert survey was conducted of environment planners who specialize in the palnning and designing of residential area as well as government employees who are in direct charge of managing children's parks. The survey findings were as follow. First, the pedestrian walkway(means of access) near the park is the most crucial factor in regards to the safety of children, followed by the entrance and exit(boundary), fency(boundary), and streets (means of access), in descending order of importance. Thus, improving the safety of the pedestrian walkway should be considered first and foremost, and it should precede improving the surrounding streets. Second, an investigation of the need for safety devices near the children's park showed that securing visibility, through the installation of an illegal parking prevention device, is imperative. Illegal parking near children's parks poses a grave risk to pedestrian safety and demands immediate action. Furthermore, a section of streets within 300m of the park entrance should be designated as a children protection zone, in addition to the designation of school zones near elementary schools.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.2
• /
• pp.329-333
• /
• 2021

V2G (Vehicle to Grid) technology for an EV (Electric Vehicle) has been assumed as so promising in a near future for its useful energy resource concept but still yet to be developed around the world for specific service purposes through various R&BD projects. Basically, V2G returns power stored in vehicle at a cheaper or unused time to the grid at more expensive or highly peaked time, and is accordingly supposed to provide such roles like peak shaving or load levelling according to customer load curve, frequency regulation or ancillary reserves, and balancing power fluctuation to grid from the weather-sensitive renewable sources like wind or solar generations. However, it has recently been debated over its prominent usage as diffusing EVs and the required charging/discharging infrastructure, partially for its addition of EV ownership costs with more frequent charging/discharging events and user inconvenience with a relative long-time participation in the previously engaged V2G program. This study suggests that a Korean DR (Demand Response) service integrated V2G system especially based upon a dynamic charge/pause/discharge scheme newly proposed to ISO/IEC 15118 rev. 2 can deal with these concerns with more profitable business model, while fully making up for the additional component (ex. battery) and service costs. It also indicates that the optimum economic, environmental, and grid impacts can be simulated for this V2G-DR service particularly designed for EV aggregators (V2G service providers) by proposing a specific V2G engagement program for the mediated DR service providers and the distributed EV owners.