• Journal of Korean Society of Steel Construction
• /
• v.21 no.6
• /
• pp.619-626
• /
• 2009

The use of thin-walled flexural members has proven to be a practical way to achieve the lowest cost in the construction of prefabricated long-span, low-rise building frames in steel. On the other hand, most of these structures are subjected to corrosion due to environmental exposure, which can reduce their carrying capacity. Corrosion damage is a serious problem for these structures as it causes thickness loss. That is, the class of a section (plastic, compact, non-compact, or slender) may change from one to another due to the loss of thickness of the compression flange and web due to corrosion. In this study, the effects of corrosion on thin-walled members in long-span steel frames were evaluated with regard to the moment-rotation curve, initial stiffness, maximum load capacity, stiffness in the post-maximum capacity, and energy absorption.

• Land and Housing Review
• /
• v.2 no.4
• /
• pp.517-528
• /
• 2011

Indiscreet developments cause environmental problems in major cities of Seoul Metropolitan Area. Among the environmental problems, the air pollution leads the citizens' physical and economic damages. Therefore, it needs to predict how much air pollutant which is emitted from human activities can be carried by urban environment, then to examine the reasonable level of urban development This study assumed that the air pollution is represented differently by the amount of emission. With the assumption, the acceptable air pollutant emission which keeps the air quality under the environmental standard is estimated, then the proper population is calculated in the case of Gwacheon, Gyeonggi. The result is as follow: First, air pollution concentrations of CO, $NO_2$, $SO_2$ which are estimated by using IDW interpolation of GIS don't excess the air environmental standard. Second, the result of correlation analysis between air pollutant emission and air pollution concentration shows that CO and $NO_2$ has high correlationship with total source of pollution and linear source of pollution, and $SO_2$ with linear source of pollution. Third, the results of regression analysis show that the acceptable population is bigger that the real population in the case of CO, and with the estimation of $NO_2$ and $SO_2$, the current population in the urban center and boundaries where the residential and commerce land uses are concentrated is bigger than the acceptable population. The consequence of this study is that the estimation of carrying capacity can suggest the acceptable human activities which keep the air quality under the environmental standard. This can leads the sustainable urban development by control the human activities under the carrying capacity of urban environment.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.691-704
• /
• 2014

Reinforced concrete (RC) shear walls are commonly used for building structures to resist seismic loading. While the RC shear walls can have a high load-carrying capacity, they tend to fail in a brittle mode under shear, accompanied by forming large diagonal cracks and bond splitting between concrete and steel reinforcement. Improving seismic performance of shear walls has remained a challenge for researchers all over the world. Engineered Cementitious Composite (ECC), featuring incredible ductility under tension, can be a promising material to replace concrete in shear walls with improved performance. Currently, the application of ECC to large structures is limited due to the lack of the proper constitutive models especially under shear. In this paper, a new Cyclic Softening Membrane Model for reinforced ECC is proposed. The model was built upon the Cyclic Softening Membrane Model for reinforced concrete by (Hsu and Mo 2010). The model was then implemented in the OpenSees program to perform analysis on several cases of shear walls under seismic loading. The seismic response of reinforced ECC compared with RC shear walls under monotonic and cyclic loading, their difference in pinching effect and energy dissipation capacity were studied. The modeling results revealed that reinforced ECC shear walls can have superior seismic performance to traditional RC shear walls.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.1
• /
• pp.41-48
• /
• 1988

Fatigue phenomena usually occur in the structures such as bridges subjected to repeated loading with increasing service year. Especially, applied stresses happen to approach to design values due to rapid increase of traffic volume and vehicle weight, so it gives serious effects to the stability of bridges. Therefore, in this paper, the data for load carrying capacity of bridges obtained from field tests were analysed statistically to investigate bridge behaviour and a basic approach to estimate the impact factor was proposed after a comparison war made between field-test data and the calculated values obtained by using matrix structural analysis method.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.6
• /
• pp.56-64
• /
• 2004

Several types of steel structures which are employed in offshore petroleum activities are constructed with tubular members. These structures are usually subjected to various types of loads such as normal functional loads and environmental loads. Furthermore, accidental loads may also act on the leg or bracing members due to supply boat collisions and objects droppings from platform decks. The extent of damage caused by these loads ranges from total collapse of the structure to small damage which may not have serious consequence at the time of accident. To make optimal design decisions regarding structural safety and economical efficiency, it is very important to be able to assess the influence of damages on the performance of damaged structural members. In the End report, a series of calculations is performed to study the effects of different parameters on the load carrying capacity of such damaged members under pure bending. And the results of analysis are compared with experiment results.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.11
• /
• pp.19-26
• /
• 2018

This paper presents the shear strengthening effect of externally post-tensioning (EPT) method using high-strength steel rod in pre-cracked reinforced concrete (RC) beams. Three- and four-point bending tests were performed on a total of 8 specimens by adjusting the strengthening depths in the deviator position of EPT. The effective strengthening depths were 435, 535, and 610 mm. The pre-loading up to about 2/3 of ultimate load capacity measured in unstrengthened RC beam were applied in the beam to be post-tensioned. The EPT method was then applied to the pre-damaged RC beams and re-loading was added until the end of the test. EPT restored deflections of 3 mm or more, which account for about 40% of deflection when the pre-loading was applied. The shear strengthening increases more than 3 times and 36~107% in terms of the stiffness and load-carrying capacity compared to unstrengthening RC beams. The increased load-carrying capacities of the post-tensioned beam with strengthening depths of 435 and 535 mm are almost the same as 36~61%, and those of 610 mm are 84~107%, which shows the greatest shear strengthening effect.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.1
• /
• pp.3-10
• /
• 2018

This experimental investigation was conducted to observe the shear strengthening behavior of pre-damaged reinforced concrete (RC) beams strengthened with externally post-tensioning steel rods. A total of six simply supported beams - two control beams and four post-tensioned beams using external steel rods - were tested to failure in shear. The external steel rods of 18 mm or 28 mm diameter were respectively employed as post-tensioning material. The four post-tensioned beams have a V-shaped profile with a deviator (or saddle pin) located at mid-span, and the post-tensioning system increased the low load-carrying capacity and overcame a little bit of deflection caused by damage. Concretely, the load-carrying capacity and flexural stiffness were respectively increased by about 25~57% and 263~387% due to the post-tensioning when compared with the unstrengthened control beams.

• Steel and Composite Structures
• /
• v.37 no.6
• /
• pp.741-759
• /
• 2020

Steel plate-concrete composite slabs provide attractive features, such as more effective loading transfer, and more cost-effective stay-in-place forms, thereby enabling engineers to design more high-performance light structures. Although significant studies in the literatures have been directed toward designing and implementing the steel plate-concrete composite beams, there are limited data available for understanding of the composite slabs. To fill this gap, nine the composite slabs with different variables in this study were tested to unveil the impacts of the critical factors on the ultimate strength behavior. The key information of the findings included sample failure modes, crack pattern, and ultimate strength behavior of the composite slabs under either four-point or three-point loading. Test results showed that the failure modes varied from delamination to shear failures under different design factors. Particularly, the shear stud spacing and thicknesses of the concrete slabs significantly affected their ultimate load-carrying capacities. Moreover, an analytical model of the composite slabs was derived for determining their ultimate load-carrying capacity and was well verified by the experimental data. Further extensive parametric study using the proposed analytical methods was conducted for a more comprehensive investigation of those critical factors in their performance. These findings are expected to help engineers to better understand the structural behavior of the steel plate-concrete composite slabs and to ensure reliability of design and performance throughout their service life.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.14 no.3
• /
• pp.33-45
• /
• 1987

The Seonjeong royal tomb is one of many historic sites in and around Seoul city and its natural environment and landscape have born damaged seriously by heavy use. So conservation planning with an estimation of reasonable carrying capacity shall be required In aspect of not only historic site conservation, but also urban forest and nature park management. Eight sites were sampled with clumped sampling method during July of 1986 and five quadrats were examined in each site. Environmental factors, actual vegetation, and environmental impact grade were investigated in field and vegetational structure was analyzed by estimation of importance value, species diversity, similarity index, DBH class distribution, etc. The result of this study can be summarized as follows. 1. Damage on soil and vegetation of middle and lower layer increased according to amount of users'impact. 2. Semi - natural vegetation covered 63% of the total area(22.2 ha) and its major species were Pinus densiflora, Quercus aliena, Q mongolica, Sorbus alnifolia, etc. Pinus densiflora was a dominant species in heavy impact area. 3. Environmental impact grade 3, 4 and 5 area covered 51% of the seminatural vegetation, Especially, the area of impact grade 4 and 5 should be restored because self-refair seemed to be impossible. 4. The semi-natural vegetation was classified with four plant communities; two P.densiflora comm., Q. mongolica-P. densiflora comm. and Q. aliena comm. One of the P. densifolra comm. was destroyed seriously with no younger trees in middle and lower layer by overuse impact and would be bareland soon. But Q. aliena comm.in light impact area showed just completion of plant succession from P. densiflora comm.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.115-122
• /
• 2010

The importance of the life cycle cost (LCC) analysis for bridges has been recognized over the last decade. However, it is difficult to predict LCC precisely since the costs occurring throughout the service life of the bridge depend on various parameters such as design, construction, maintenance, and environmental conditions. This paper presents a methodology for the optimal life cycle cost design of a bridge. Total LCC for the service life is calculated as the sum of initial cost, damage cost, maintenance cost, repair and rehabilitation cost, user cost, and disposal cost. The optimization method is applied to design of a bridge structure with minimal cost, in which the objective function is set to LCC and constraints are formulated on the basis of Korean Bridge Design Code. Initial cost is calculated based on standard costs of the Korea Construction Price Index and damage cost on damage probabilities to consider the uncertainty of load and resistance. Repair and rehabilitation cost is determined using load carrying capacity curves and user cost includes traffic operation costs and time delay costs. The optimal life cycle cost design of a bridge is performed and the effects of parameters are investigated.