• 한국환경복원기술학회지
• /
• 제20권1호
• /
• pp.55-75
• /
• 2017

The purpose of this study is to present the basic data for restoration of physical stream environment by analyzing habitat variables because habitat environment is changed due to the construction of waterfront space in urban streams. Assessment results of 10 habitat variables(three divisions) were almost same as optimal condition, in the reach of reference stream where there are no stream crossing structures and channel alteration. Assessment results of reaches in urban rivers, where streams were improved on water-friendly recreation activities, appeared to be marginal condition. Because habitat environment got worse due to stream improvement works such as construction of weir for water landscape, stepping stones for walking, low water revetment and high water revetment, and high water channel. In addition, in the case of mid gradient stream, the frequency of riffles was small or not existed because the intervals of the river crossing structures was short. In the case of mild stream types, the diversity of the pool was damaged due to the deposition of sludge in the upstream pool of weir and the installation of low water revetment.

• Computers and Concrete
• /
• 제6권4호
• /
• pp.281-303
• /
• 2009

The lack of safety of bridge deck structures causes frequent repair and strengthening of such structures. The repair induces great loss of economy, not only due to direct cost by repair, but also due to stopping the public use of such structures during repair. The major reason for this frequent repair is mainly due to the lack of realistic and accurate assessment system for the bridge decks. The purpose of the present research was to develop a realistic expert system, called Bridge Slab-Expert which can evaluate reasonably the condition as well as the service life of concrete bridge decks, based on the deterioration models that are derived from both the structural and environmental effects. The diagnosis assessment of deck slabs due to structural and environmental effects are developed based on the cracking in concrete, surface distress and structural distress. Fuzzy logic is utilized to handle uncertainties and imprecision involved. Finally, Bridge Slab-Expert is developed for prediction of safety and remaining service life based on the chloride ions penetration and fick's second law. Proposed expert system is based on user-friendly GUI environment. The developed expert system will allow the correct diagnosis of concrete decks, realistic prediction of service life, the determination of confidence level, the description of condition and the proposed action for repair.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.866-870
• /
• 2009

Mobile Health (M-Health) system is a recent term for medical and public health practice supported by mobile devices, such as mobile phones, PDAs, and other wireless devices. Mobile Health system has been successfully establishing at few general hospital in Korea. However, to use diverse devices manufactured by various company cause inoperability, and lack of security disappoints customers often. Although the outstanding health environment, most of hospitals are unavailable to share electronic patient records due to lack of standard protocol to handle the interoperability each other. Health Level 7 (HL7) is the best solution for the problem. In this paper, we will analyse a current M-Health service in terms of security and mobile device, and suggest iPhone for the best device against hospital environment. Also, for keep confidentiality of health information and patient privacy, enhanced security mechanism is introduced. As a consequence, interoperable standard, and most appropriate device for supporting staffs and M-Health performance, and enhanced securirty mechanism will be integrated in order to propose improved M-health model.

• 한국물환경학회지
• /
• 제23권4호
• /
• pp.423-428
• /
• 2007

The 21st century is that both human and environment live together. The advancing knowledge concerning our environment instigates a change in understanding about the physical surroundings. The construction field particularly induces significant improvements that are environmental-friendly. To convene this demand, several manuals and guidelines related to the environmental issues have been enacted and amended. Especially the manuals and guidelines issued from Ministry of Environment (MOC) and Ministry of Construction and Transportation (MOCT) is requiring the addition of environmental knowledge in construction technology. Recently, environmental assessments and advanced environmental measures in various kinds of construction are persuasively been carried out. The policy of Total Maximum Daily Load is the one more reason for the revisions of the manual and guideline, which is really requiring the addition of the environmental knowledge in construction technology. Therefore, this research is focusing on revising the manuals and guidelines related to road construction and maintenance works issued from MOCT.

• 한국정보전자통신기술학회논문지
• /
• 제12권1호
• /
• pp.43-48
• /
• 2019

일상생활에 필요한 상점의 존재는 주민의 주거환경 만족도를 높여주는 요인이 되며, 창업자의 입장에서 지역주민의 니즈가 높은 업종의 창업은 사업 성공을 좌우하는 요인이 될 수 있다. 본 논문에서는 시민들이 체감할 수 있는 일상생활과 밀접한 업종의 창업현황을 알아보고, 이러한 상점의 형성이 신도시 초기 소비자 니즈에 부합하는지 분석하여 창업자와 소비자가 모두 윈윈할 수 있는 의미있는 결과를 도출하고자 한다. S시를 대상으로 신도시 출범 직후부터 현재까지의 생활밀접업종 현황과 시민의 니즈를 분석한 결과, 생활밀접업종에 대한 주민의 니즈는 새로운 거주지로 이주시 가장 중요하게 생각하는 니즈가 도시 조성 초반에 강하게 나타나는 특성을 가지고 있다. 그리고 정착 과정에서 니즈의 해소 및 증대에 따라, 니즈의 크기가 변화하는 특성을 가지고 있다. S시의 경우, 교육에 대한 니즈가 도시 조성 초반 강하게 나타나며, 시간의 흐름에 따라 일정부분 약해지는 특성을 보인다. 반면 생활의 기본요건이라고 할 수 있는 음식에 대한 니즈는 낮게 시작해서 지속적으로 증대되는 특성을 가지고 있다.

• 한국자동차공학회논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2013

Recently, the automotive technology has developed with electronics and information technology as convergence technology while vehicles had been regarded as machines. Moreover, vehicles are becoming more intelligent and safer devices, assembly of advanced technologies by customers' demand. Even though all of installations of vehicle have attracted as diverting devices, it cause drivers' mistakes like delay of response on traffic condition. Here, we proposed the Field Operational Test (FOT) environment which could be used as driving and road conditions collector(Vehicle motion, Traffic condition, Driver input, Driver state, etc.) for researches about Driver Friendly Intelligent System(SCC, LDWS, etc.), Human Vehicle Interface(Driving Workload, etc.) and Economic Drive Model. Furthermore driving patten and fuel consumption patten of drivers were analyzed by measured data and direction of future research was suggested.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1850-1858
• /
• 2018

Glucosamine (GlcN) is widely used in the nutraceutical and pharmaceutical industries. Currently, GlcN is mainly produced by traditional multistep chemical synthesis and acid hydrolysis, which can cause severe environmental pollution, require a long prodution period but a lower yield. The aim of this work was to develop a whole-cell biocatalytic process for the environment-friendly synthesis of glucosamine (GlcN) from N-acetylglucosamine (GlcNAc). We constructed a recombinant Escherichia coli and Bacillus subtilis strains as efficient whole-cell biocatalysts via expression of diacetylchitobiose deacetylase ($Dac_{ph}$) from Pyrococcus furiosus. Although both strains were biocatalytically active, the performance of B. subtilis was better. To enhance GlcN production, optimal reaction conditions were found: B. subtilis whole-cell biocatalyst 18.6 g/l, temperature $40^{\circ}C$, pH 7.5, GlcNAc concentration 50 g/l and reaction time 3 h. Under the above conditions, the maximal titer of GlcN was 35.3 g/l, the molar conversion ratio was 86.8% in 3-L bioreactor. This paper shows an efficient biotransformation process for the biotechnological production of GlcN in B. subtilis that is more environmentally friendly than the traditional multistep chemical synthesis approach. The biocatalytic process described here has the advantage of less environmental pollution and thus has great potential for large-scale production of GlcN in an environment-friendly manner.

• 제어로봇시스템학회논문지
• /
• 제7권4호
• /
• pp.334-343
• /
• 2001

Polishing a die that has free-form surfaces is a time-consuming and tedious job, and requires a considerable amount of high-precision skill. Some workers tend to gradually avoid the polishing work because of the poor environment caused by dust and noise. In order to reduce the polishing time and cope with the shortage of skilled workers, a user-friendly automatic polishing system was developed in this research. The polishing system with five degrees of freedom is able to keep the polishing tool normal to the die surface. The polishing system is controlled by a PC-NC controller. To easily operate the developed polishing robot system, this study developed an integrated program in the Windows environment. This program consists of four modules: the polishing module, the graphic simulator, the polishing data generation module, and the teaching module. Also, the automatic teaching system was developed to easily obtain teaching data and it consists of a three dimensional joystick and a proximity sensor. The joystick is used to simultaneously drive the polishing system to an arbitrary orientation and the proximity sensor is used to obtain teaching points precisely. Also, to evaluate the stability of the driving program and the teaching system, polishing experiments of a die of saddle shape were carried out.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.515-522
• /
• 2017

The natural dyeing industry has been faced with increasing demands of constant needs for environmentally and body friendly clothing products among modern consumers. Natural dyeing has attracted attention as a next-generation technology in green textiles. Dyestuffs need to be diversified for technological development activation in order to meet the increasing demands for natural dyeing. This study extracted dyeing solutions from the leaves of the Rose of Sharon (the national flower of South Korea) and investigated its dyeing properties for the development of various natural dyestuffs. This study investigates the dyeability of silk fabrics with Rose of Sharon leaves extract. Optimal conditions for dyeing of silk fabrics with the extract of Rose of Sharon were $40^{\circ}C/80min$ and $90^{\circ}C/60min$ with 100% concentration. Looking at the results, it showed the best K/S value at pH3, Sn pre-mordanting and Fe post-mordanting. Color fastness to washing, dry cleaning, rubbing and perspiration was good at grade 4-5 or 4. However, light fastness was observed in grade 2. In aspect of functional property, it showed an excellent result of 90% deodorization rate. In addition, its proven functionalities (deodorant properties) will help to produce high value added environment-friendly products. Those findings demonstrate the possibilities of the Rose of Sharon as an environment-friendly dye.

• 한국환경복원기술학회지
• /
• 제7권3호
• /
• pp.1-13
• /
• 2004

본 연구에서는 건설 사업의 수행과정에서 나타날 수 있는 환경훼손을 최소화하거나 저감하고, 자연과의 조화를 이루기 위한 다양한 기술과 공법, 정책 및 제도를 도출하고자 하였으며, 구체적인 사례로 댐건설 사업에 대한 친환경 기술과 공법을 분석하였다. 이를 위해서 기존 연구사례 및 문헌을 고찰하여 친환경 요소를 도출하였고, 이미 조성되었거나 조성 중인 댐을 대상으로 실제 적용되고 있는 친환경 요소를 분석하였으며, 이를 종합하여 건설사업에 도입될 수 있는 친환경 항목을 설정하고 기술 및 공법을 제안하였다. 그 결과 생태계 보전, 생태계 복원, 새로운 생태계 조성, 친수환경 및 위락, 경관 및 역사문화 등이 친환경요소로 도출되었다. 또한 환경친화형 건설사업의 지속적인 추진과 성과를 위한 정부차원의 정책과 제도적 방안을 제안하였다. 이러한 적극적인 생태환경 보전 및 복원을 위한 노력이 지속적으로 이루어짐으로써 건설사업에 의한 환경파괴를 최소화하고 새로운 생태환경을 창출하는 친환경 건설의 대표적인 사례로 자리매김될 수 있으며, 나아가 건설 분야의 친찬경 사고 확산을 위한 근거가 될 수 있을 것으로 판단된다.