• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.464-473
• /
• 2022

In this paper, about a lightweight design that satisfies the performance of UHF-GPS Antenna used in autonomous underwater vehicle is proposed. Structural analysis, watertight external pressure test and non-destructive testing used in the design process are decided in consideration of structural safety for operating external forces in the underwater environment. First, the material of radome is selected for the performance of the UHF-GPS Antenna for communication with the carrier on the underwater operation in consideration of the 20 bar pressure generated. And the material of radome as PA-GF is selected by conducting electromagnetic field analysis and structural analysis and by considering high strength, rigidity and high dielectric constant. Electromagnetic field analysis and structural analysis by the thickness of radome are additionally performed in order to satisfy the required weight of UHF-GPS antenna. After selecting the final model, its structural safety is verified through watertight external pressure test and non-destructive testing.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_3
• /
• pp.1289-1295
• /
• 2023

Polyurethane foam insulation required for storing and transporting cryogenic liquefied gas is already widely used as a thermal insulation material for commercial LNG carriers and onshore due to its stable price and high insulation performance. These polyurethane foams are reported to have different mechanical performance depending on the density, and the density parameter is determined depending on the amount of the blowing agent. In this study, density-dependent polyurethane foam was fabricated by adjusting the amount of blowing agent. The mechanical properties of polyurethane foam were analyzed in the room temperature and cryogenic temperature range of -163℃ at 1.5 mm/min, which is a quasi-static load range, and the cells were observed through microstructure analysis. The characteristics of linear elasticity, plateau, and densification, which are quasi-static mechanical behaviors of polyurethane foam, were shown, and the correlation between density and mechanical properties in a cryogenic environment was confirmed. The correlation between mechanical behavior and cell size was also analyzed through SEM morphology analysis. Polyurethane foam with a density of 180 kg/m³ had a density about twice as high as that of a polyurethane foam with a density of 96 kg/m³, but yield strength was about 51% higher and cell size was about 9.5% smaller.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1073-1080
• /
• 2023

The development and speed improvement of the Internet network, and the development of many platforms based on it, have brought about a rapid expansion of production and consumption of various contents. However, the existing IP-based Internet system cannot efficiently cope with such an urgent increase in data. Accordingly, an alternative called the CCN(Contents Centric Network) has emerged, enabling more efficient data transmission and reception centered on content rather than host. In this paper, we will deal with the mobility of intermediate nodes in CCN real-time streaming service, which is one of the major research fields of CCN, and minimize network overload through more efficient path switching through RSSI detection. In other words, by improving the method of selecting and switching a spare path when an intermediate node located between the requester(consumer) and the provider moves, a mechanism for managing data transmission is not interrupted and unnecessary load due to route switching does not occur in the network.

• Journal of Hydrogen and New Energy
• /
• v.35 no.2
• /
• pp.146-151
• /
• 2024

The demand for research on materials with excellent cryogenic strength and ductility has been increasing, particularly for applications such as liquid hydrogen (20 K) storage tanks. To effectively utilize liquid hydrogen, a system capable of maintaining and operating at 20 K is essential. Therefore, preliminary research and verification of the cooling system are crucial. In this study, a heat transfer analysis was conducted on a cooling system to meet the cryogenic environment requirements for cryogenic hydrogen chamber, which are conducted at liquid helium temperatures (4 K). The cooling mechanism in a helium cooling system was examined using numerical analysis. The numerical cooling trends were compared with experimentally obtained cooling results. The good agreement between numerical and experimental results suggests that the numerical approach developed in this study is applicable over a wide range of cryogenic systems.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.2
• /
• pp.41-51
• /
• 2024

Background: The purpose of this study was to identify the effect of home-based exercise program in elderly with chronic diseases on balance, activities of daily living, depression and quality of life. Design: One group pretest-posttest design Methods: The subjects consisted of 21 elderly people over the age of 65 years with chronic diseases lived in seo-gu, Gwangju. Home-based exercise program was performed twice a week, for an hour, during 6 weeks under supervision of an experienced instructor. The home-based exercise program was structured to last a total of 1 hour, consisting of 10 minutes of warm-up, 30 minutes of main exercises, and 20 minutes of concluding exercises. For the warm-up, we performed range of motion, stretching, and flexibility exercises. The main exercises comprised of strength, weight-bearing and balance exercises, and endurance exercises. The concluding exercises were tailored to the individual's home environment and needs, including task-oriented daily living training such as getting up from bed, moving to the restroom, and walking indoors. The subjects were assessed before and after the exercise program with berg balance scale(BBS), Korean-version modified barthel index(K-MBI), euro quality of life questionnaire 5-dimensional classification(EQ-5D), and geriatric depression scale short form-Korea(GDSSF-K). The collected data was analyzed using SPSS Win 18.0 program. Results: The results showed statistically significant difference in all domains of the BBS, K-MBI, EQ-5D, GDSSF-K after the exercise program. Conclusion: These results suggest that Home-based exercise program has resulted in a significant improvement on ADL, depression and quality of life in elderly with chronic diseases.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.3
• /
• pp.195-202
• /
• 2006

Deterioration of sewer concrete is representative that biochemical corrosion according to the $H_2S$ has growth by inhabit sulfur-oxidzing bacteria because of special environment in sewer. But in case of domestic, fundamentally, sulfur-oxidzing bacteria could moderate development of repair material method is need because of corrosion prevent method is inconsideration with carry out to improve project. In this paper, after development of spread type antibiotic with antibio-metal, antibacterial performance about sulfur-oxidzing bacteria of antibiotic and tested to estimate fundamental properties of bonding strength, abrasion contents, contents of water absorption, contents of air permeability, carbonation depth, chloride ion penetration depth and chemical resistance of spread with antibiotic restorative mortar.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.151-158
• /
• 2007

The recent government policy for environment is pursuing for a circular waste control system not only to reduce waste as much as possible but also to vigorously use the already produced waste. Copper slag has a higher fineness modulus and a greater specific gravity than natural aggregate. but when the substitutive ratio of fine aggregate is higher than 30%, material segregation occurs by bleeding. Thus, in this study, the strength and the physical properties were tested for the specimens manufactured by varying the types of admixtures, and the substitutive ratio of copper slag to suppress material segregation occurring due to the bleeding of concrete using copper slag as the substitutive material of fine aggregate and to find the adequate substitutive ratio of copper slag.

• Elastomers and Composites
• /
• v.59 no.2
• /
• pp.73-81
• /
• 2024

In the field of electronic components, the potting material, which is a part of the electronic circuit package, plays a significant role in protecting circuits from the external environment and reducing signal interference among electronic devices during operation. This significantly affects the reliability of the components. Therefore, the accurate prediction and assessment of the lifespan of a material are of paramount importance in the electronics industry. We conducted an accelerated thermal aging evaluation using the Arrhenius technique on elastic potting material developed in-house, focusing on its insulation, waterproofing, and contraction properties. Through a comprehensive analysis of these properties and their interrelations, we confirmed the primary factors influencing molding material failure, as increased hardness is related to aggregation, adhesion, and post-hardening or thermal-aging-induced contraction. Furthermore, when plotting failure times against temperature, we observed that the hardness, adhesive strength, and water absorption rate were the predominant factors up to 120 ℃. Beyond this temperature, the tensile properties were the primary contributing factors. In contrast, the dielectric constant and loss tangent, which are vital for reducing signal interference in electric devices, exhibited positive changes(decreases) with aging and could be excluded as failure factors. Our findings establish valuable correlations between physical properties and techniques for the accurate prediction of failure time, with broad implications for future product lifespans. This study is particularly advantageous for advancing elastic potting materials to satisfy the stringent requirements of reliable environments.

• Geomechanics and Engineering
• /
• v.38 no.2
• /
• pp.125-137
• /
• 2024

In paste backfill mining, cemented coal gangue-fly ash backfill (CGFB) can effectively utilize coal-based solid waste, such as gangue, to control surface subsidence. However, given the pressurized water accumulation environment in goafs, CGFB is subject to coupling effects from water pressure and chloride ions. Therefore, studying the influence of pressurized water on the chlorine salt erosion of CGFB to ensure green mining safety is important. In this study, CGFB samples were soaked in a chloride salt solution at different pressures (0, 0.5, 1.5, and 3.0 MPa) to investigate the chloride ion transport characteristics, hydration products, micromorphology, pore characteristics, and mechanical properties of CGFB. Water pressure was found to promote chloride ion transfer to the CGFB interior and the material hydration reaction; enhance the internal CGFB pore structure, penetration depth, and chloride ion content; and fill the pores between the material to reduce its porosity. Furthermore, the CGFB peak uniaxial compression strain gradually decreased with increasing soaking pressure, whereas the uniaxial compressive strength first increased and then decreased. The resulting effects on the stability of the CGFB solid-phase hydration products can change the overall CGFB mechanical properties. These findings are significant for further improving the adaptability of CGFB for coal mine engineering.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.34 no.4
• /
• pp.629-639
• /
• 2024

CHAM is designed with an emphasis on encryption speed, considering that in the ISO/IEC standard block cipher operation mode, encryption functions are used more often than decryption functions. In the superscalar architecture of modern general-purpose processors, different ordering of operations can lead to different processing speeds, even if the computation configuration is the same. In this paper, we analyze the implementation efficiency and security of CHAM-like structures, which rearrange the order of operations in the ARX-based block cipher CHAM, for single-block and parallel implementations in a general-purpose processor environment. The proposed structures are at least 9.3% and at most 56.4%efficient in terms of encryption speed. The security analysis evaluates the resistance of the CHAM-like structures to differential and linear attacks. In terms of security margin, the difference is 3.4% for differential attacks and 6.8%for linear attacks, indicating that the security strength is similar compared to the efficiency difference. These results can be utilized in the design of ARX-based block ciphers.