• Applied Chemistry for Engineering
• /
• v.16 no.3
• /
• pp.317-322
• /
• 2005

Nowadays, recycling of aggregates from the waste concrete is in big demand due to the protection of environment and the shortage of aggregates that are needed for ever expanding construction projects. This study was undertaken to examine the feasibility of recycling waste concrete powder produced in the crushing process of demolished concrete as a filler material for polymer mortar. In this study, polymer mortar specimens were prepared by varying the mix proportion of polymer binder (ranging 9~15 wt%), waste concrete powder (ranging 0~20 wt%) substituted for silica powder, 0.1~0.3 mm fine aggregate (ranging 21~24 wt%) and 0.7~1.2 mm fine aggregate (ranging 44~47 wt%). For the prepared polymer mortar specimens, various physical properties such as strength, water absorption, heat water resistance, acid resistance, pore distribution and SEM observation were investigated in this work. As a result, physical properties of polymer mortar were observed to have remarkably improved with an increase of polymer binder, but greatly deteriorated with an increase of substitution quantity of waste concrete powder.

• Steel and Composite Structures
• /
• v.29 no.1
• /
• pp.77-90
• /
• 2018

This paper presents a combined numerical, experimental, and theoretical study on the behavior of the concrete-filled double circular steel tubular (CFDT) stub columns under axial compressive loading. Four groups of stub column specimens were tested in this study to find out the effects of the concrete strength, steel ratio and diameter ratio on the mechanical behavior of CFDT stub columns. Nonlinear finite element (FE) models were also established to study the stresses of different components in the CFDT stub columns. The change of axial and transverse stresses in the internal and external steel tubes, as well as the change of axial stress in the concrete sandwich and concrete core, respectively, was thoroughly investigated for different CFDT stub columns with the same steel ratio. The influence of inner-to-outer diameter ratio and steel ratio on the ultimate bearing capacity of CFDT stub columns was identified, and a reasonable section configuration with proper inner-to-outer diameter ratio and steel ratio was proposed. Furthermore, a practical formula for predicting the ultimate bearing capacity was proposed based on the ultimate equilibrium principle. The predicted results showed satisfactory agreement with both experimental and numerical results, indicating that the proposed formula is applicable for design purposes.

• Proceedings of KOSOMES biannual meeting
• /
• 2004.05b
• /
• pp.121-125
• /
• 2004

Recently, High Tensile Steel is adapt to thin plate on the steel structure and marine structure is used widely, It is possible for buckling happens great. Specially, Initial deflection of ship structure happens in place absence necessarily by heat processing of welding or cutting etc. This Initial Deflection is exerted negative impact when thin plate absence complicated nonlinear behaviour accompanied secondary budding. As a result, must idealize initial deflection that occurrence is possible to endow stability and accuracy in the hull structure or marine structure and reflect in early structure design considering secondary buckling. Longi direction of compressive load interacts and analyzed finite element series analysis that apply various kinds initial deflection shape measured actually on occasion that is arranged simply supported condition in this research. Applied ANSYS (elasto-plasticity large deformation finite element method) to be mediocrity finite element program for analysis method and analysis control used in Newton-Raphson method & Arc-length method.

• Computers and Concrete
• /
• v.22 no.3
• /
• pp.261-267
• /
• 2018

Long-term deformation of a steel-reinforced concrete (SRC) column is different from that of a reinforced concrete (RC) column due to the different moisture distribution. Wide-flange steel in an SRC column obstructs diffusion and makes long-term deformation slower. Previous studies analyzed the characteristics of long-term deformation of SRC columns. In this study, an additional experiment is conducted to more precisely investigate the effect of wide-flange steel on the long-term deformation of SRC columns. Long-term deformation, especially creep of SRC columns with various types of wide-flange steel, is tested. Wide-flange steel for the experiment is made of thin acrylic panels that can block diffusion but does not have strength, because the main purpose of this study is to exclusively demonstrate the long-term deformation of concrete caused by moisture diffusion, not by the reinforcement ratio. Experimental results show that the long-term deformation of a SRC column develops slower than that in a RC column, and it is slower as the wide-flange steel hinders diffusion more. These experimental results can be used for analytical prediction of long-term deformation of various SRC columns. An example of the analytical prediction is provided. According to the experimental and analytical results, it is clear that a new prediction model for long-term deformation of SRC columns should be developed in further studies.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6613-6618
• /
• 2014

Background: The X-ray repair cross-complementing group 3 (XRCC3) is a highly suspected candidate gene for cancer susceptibility. Attention has been drawn upon associations of the XRCC3 Thr241Met polymorphism with breast cancer risk. However, the previous published findings remain controversial. Hence, we performed a meta-analysis to accurately evaluate any association between breast cancer and XRCC3 T241M (23, 812 cases and 25, 349 controls) in different inheritance models. Materials and Methods: PubMed and Web of Science databases were searched systematically until December 31, 2013 to obtain all the records evaluating the association between the XRCC3 Thr241Met polymorphism and breast cancer risk. Crude odds ratios (ORs) together with 95% confidence intervals (CIs) were used to assess the strength of associations. Results: When all eligible studies were pooled into the meta analysis of XRCC3 T241M polymorphism, a significantly increased breast cancer risk was observed in heterozygote comparison (OR=1.06, 95%CI=1.01-1.12). No significant associations were found in other models. In subgroup analysis, this polymorphism seemed to be associated with elevated breast risk in Asians. No publication bias was detected. Conclusions: This meta-analysis suggests that the T241M polymorphism confers a weakly increased breast cancer risk. A study with the larger sample size is needed to further evaluate gene-gene and gene-environment interactions of the XRCC3 T241M polymorphism with breast cancer risk.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.3
• /
• pp.184-191
• /
• 2015

In this paper, a normal mode reverberation model for a range-independent environment of shallow water is proposed to calculate the reverberation level in the low-frequency range. Normal mode is used to calculate the acoustic energy propagating from the source to the scattering area and from the scattering area to the receiver. Each mode is decomposed into up and down going waves to consider scattering strength at the scattering area. The scattering functional form combines Lambert's law with a Gaussian-like term near the specular direction based on Kirchhoff approximation considering bottom condition. For verification of the suggested model, the result is relatively compared to several solutions of the problem XI and XV in the Reverberation Modeling Workshop I sponsored by the US Office of Naval Research.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.9
• /
• pp.369-376
• /
• 2017

Recently, an RSSI-based fingerprinting localization technology has been widely used in indoor location-based services. In the conventional fingerprinting method, as many APs as possible are used to increase the accuracy of location estimation. In another study, a part of APs having the strongest RSSI signal intensity are selected and used to reduce the time spent for positioning. However, it does not reflect the influence of RSSI occurred from the changes of the surrounding environments such as human movement or moving obstacles in a real environment. The environmental changes may cause the difference between the predicted RSSI signal strength value and the measured value, and thus occur an unpredictable error in the position estimation. Therefore, in order to mitigate the error caused by environmental factors, it is necessary to select APs suitable for indoor positioning estimation considering the changes in the surrounding environments. In this paper, we propose a method to select stable APs considering the influence of surrounding environments and derive a suitable positioning algorithm. In addition, we compare and analyze the performance of the proposed method with that of the existing AP selection methods through experiments.

• STI Policy Review
• /
• v.6 no.1
• /
• pp.85-110
• /
• 2015

Science and technology diplomacy has become an important policy agenda because of its diplomatic utility and enhancing of international science networks. However, different countries possess different objectives and governance of S&T diplomacy. In this context, this paper seeks to answer the following questions: what are the similarities and differences of S&T diplomacy in countries and what shapes these characteristics? To answer these questions, this paper conducts a comparative case study with five countries - Switzerland, Germany, Japan, the United Kingdom, and the United States - whose S&T diplomatic programs are highly recognized and benchmarked by other countries. A useful typology is devised to conduct a systematic comparison. For S&T diplomatic objectives, this paper suggests five types by elaborating concepts from the previous literature: access diplomacy, promotion diplomacy, public aid diplomacy, functional diplomacy, and global leadership diplomacy. Also, in terms of a governance model for S&T diplomacy, three models - a sciencecentered model, a science-outsourcing model and a top-down coordinating model - are suggested based on leadership organization. This paper reveals the different characteristics of the selected countries in S&T diplomacy. While the selected countries pursue almost every type of S&T diplomatic objective, the US and the UK tend to conduct influence-based diplomacy more than other countries do. In addition, different countries each have unique governance models for S&T diplomacy. While more research is necessary for vigorously testing the causes of different objectives and their relationship with governance models, this paper suggests more general policy implications throughout. The strength of the country's S&T base is fundamentally important for the success of S&T diplomacy. However, domestic S&T assets need to be transferred to its diplomatic capabilities. In this sense, the appropriate governance that fits best with the country's S&T mission should be established, while S&T communities should increasingly play a leadership role in evolving global S&T networks.

• Journal of Welding and Joining
• /
• v.34 no.5
• /
• pp.70-76
• /
• 2016

In this study, Microstructure and tensile properties in arc brazed joints of 1000MPa grade DP steel using Cu-Si insert metal were investigated. The fusion zone was composed of Cu phase which solidified a little Fe and Si. The former phase formed due to dilute the edge of base material by arc, although Fe was not solid solution in Cu at the room temperature. Cu3Si particles formed by crystallization at $1100^{\circ}C$ during faster cooling. After the tensile shear test, there are no differences between the brazed joint efficiencies. The maximum joint efficient was about 37% compared to strength of base metal. It is better than that of arc brazed joint of DP steel using Cu-Sn filler metal. Fracture position of all brazing conditions was in the fusion zone. Crack initiation occurred at three junction point which was a stress singularity point of upper sheet, lower sheet and the fusion zone. And then crack propagated across the fusion zone. The reason why the fracture occurred at fusion zone was that the hardness of fusion zone was lower than that of base material and heat affected zone. The correlation among maximum load and hardness of fusion zone and EST at fractured position was $R^2=0.9338$. Therefore, this means that hardness and EST can have great impact on maximum load.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.3
• /
• pp.457-476
• /
• 2016

This was investigated on the major issues and research trends regarding the heat-treatment of woods through literature reviews. The principal heat-treatment technologies utilized for industrial purposes include the Plato-process (Netherlands), the Retification process (France), the OHT-process (Germany), and the Thermowood Process (Finland). Factors that mainly influence the heat-treatment process are the wood species, process temperature, processing time, and the heating medium (air, steam, vacuum, N2, oil, etc.). Researches on investigating the optimal conditions with these process conditions being the variables stand as the mainstream. Heat-treated woods present dimensional stability improvement, but mass loss and strength reduction, a wide variations for decaying inhibition, and insufficient resistance against mold, wood borer, and termites. For further improvement in respects of durability or resistance to biological degradation, necessity to search for more suitable heat treatment process and processing conditions fit for each wood species has been suggested. Exploiting new ways to utilize heat-treated wood and extending its range of use have been considered to be important matters that need more effort put into for the sustainable and sound environment as well as saving the wood resources.