• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.3
• /
• pp.439-446
• /
• 2021

Environmental damage caused by marine plastic debris occurs and has become a major contributor to marine pollution. This study analyzed the current state of marine plastic debris pollution and proposed essential strategies to reduce damage. To assess the current state of pollution arising from marine plastic debris, this study investigated the properties of plastic debris, reviewed case studies of ecological impacts, and examined the inflow and distribution of marine plastic debris. The results of this study indicate that the major deleterious effects of marine plastics are entanglement and ingestion. In addition, the amount of plastic waste entering the sea was estimated to be 230 Mt in 2015 and may increase to 554 Mt in 2050. In this study, three key strategies were proposed to reduce damage and preserve the ecosystem, including: 1) removing plastic debris in the marine environment, 2) limiting the release of plastic debris to the marine environment, and 3) preventing damage to humans and marine life from plastic debris. To minimize the environmental damage caused by marine plastic debris, the proposed response strategies should be implemented in parallel.

• Wind and Structures
• /
• v.32 no.5
• /
• pp.487-499
• /
• 2021

The wind-blown sand effect on the high-speed train is investigated. Unsteady RANS equation and the SST k-ω turbulent model coupled with the discrete phase model (DPM) are utilized to simulate the two-phase of air-sand. Sand impact force is calculated based on the Hertzian impact theory. The different cases, including various wind velocity, train speed, sand particle diameter, were simulated. The train's flow field characteristics and the sand impact force were analyzed. The results show that the sand environment makes the pressure increase under different wind velocity and train speed situations. Sand impact force increases with the increasing train speed and sand particle diameter under the same particle mass flow rate. The train aerodynamic force connected with sand impact force when the train running in the wind-sand environment were compared with the aerodynamic force when the train running in the pure wind environment. The results show that the head car longitudinal force increase with wind speed increasing. When the crosswind speed is larger than 35m/s, the effect of the wind- sand environment on the train increases obviously. The longitudinal force of head car increases 23% and lateral force of tail increases 12% comparing to the pure wind environment. The sand concentration in air is the most important factor which influences the sand impact force on the train.

• Industry Promotion Research
• /
• v.9 no.2
• /
• pp.185-195
• /
• 2024

This study examines the factors influencing college students' entrepreneurial intentions in the rural entrepreneurial environment of colleges, considering the role of entrepreneurial learning as a mediator. It analyzes four key environmental dimensions: policies and regulations, entrepreneurship education, financial support, and social culture. A survey of 5 30 college students in Zhejiang Province revealed that the college entrepreneurial environment favorably impacts entrepreneurial learning and rural entrepreneurial intentions. Based on these findings, practical measures are proposed to enhance students' intentions, emphasizing personal practice, university leadership, and government support. These efforts can optimize the college entrepreneurial environment and foster higher entrepreneurial intentions among students.

• Journal of Environmental Policy
• /
• v.12 no.3
• /
• pp.3-20
• /
• 2013

Recently, impacts and damages of extreme climate change have already affected on worldwide. Thus adaptation and action plan are essential concepts in minimizing the impacts of climate change. In order to introduce climate change adaptation decision-making measure, the need for high-quality and integrated information system within adaptation policy has increased enormously. However, most of adaptation information is based on different sources and various backgrounds. Currently, domestic climate change information is disseminated from about 132 internet sites and most of them are limited to general information of climate change, rather than information that are based on scientific evidence. Also, there are some difficulties in updating new resources. Reliable climate change information is provided from different agencies, which makes users difficult to locate right information they need. As a progress to overcome the limitations of these problems, we carried out a feasibility research on integrated information system for climate change adaptation. For the objectives, our solutions are as follows. First, we analyzed definition of climate change adaptation and climate change adaptation information. Second, we suggested integrating the information system for adaptation and phased implementation plan for establishing integrated information system for climate change. Finally, we verified the establishment of integrated support system based on policy applications of integrated information system. This system will provide an integrated climate change information and be a very useful tool to support the decision making process of effective climate change adaptation policies.

• Asian Journal of Turfgrass Science
• /
• v.12 no.1
• /
• pp.49-78
• /
• 1998

Nowadays, there are increasing demands of golf courses and it is necessary to make more golf courses than the present. To do this, we need to improve the environmental problems with the regional inhabitants, and it is said that the first thing to be considered in developing any golf course in Korea is to preserve the environment. In this context, the purpose of this study is to set forth several design factors to lessen the negative impacts which are accompanied with the development of golf courses. 1. The present conditions of golf courses in Korea Many new golf courses have come into being, particularly since the late 1980s, and now, in the year of 1997, over one hundred of golf courses are doing their business, yet the number of golf course is still less than required. So far, over a half of them have been made in the vicinity of Seoul on account of various reasons, and this has adversely affected on our natural environment. This unreasonable development of golf courses has caused serious water pollution, landslides and the other problems. Also, the topography of Korea is not good for golf courses. Although the demands of golf courses are increasing, the suitable sites for them are very limited, and therefore it is sometimes unavoidable to make golf courses on steep hills. Consequently, in designing golf courses in Korea, the most important thing is the balance between natural environment and artificial environment. 2.Eco-friendly golf course design factors 1) The concept of eco-friendly golf courses Ecologically sustainable and sound golf courses which are made by eco-friendly approaches 2)Basic conditions of eco-friendly golf courses (1)The most suitable sites (2) Conservation of existing ground as much as possible (3)Proper use of agricultural chemicals which have great impacts on the environment (4) Reasonable use of fertilizers (5) Developing a specialized fertilizer only for grass (6) Adaptation of organic agriculture (7) Improvement of grass sorts (8) Establishing reservoirs for purifying the water from golf courses 3) Eco-friendly golf courses (1) Location-Enough area /Gentle slope/Winding ground/Including lakes or streams /Not crossing wind's main direction Facing south or southeast /Suitable soIl for grass /Good drainage /Low level of underground water (2)Course layout and design -Consideration about existing contours as much as possible -Adaptation of Scotish design trend -Various holes' configuration -Consideration toward surrounding landscapes -Reducing grass areas -Giving buffer zones -Adapting computer methods in the process of site analysis and design (3) Eco-friendly considerations in constructing and managing golf courses -Protection of wildlife -Reuse of existing forests and preservation of topsoil -Renovation of old-fashioned courses -Reducing grass areas -Purification of water -Standization of management -Strict regulations against chemicals -Recycling organic materials -Through separation of the water inside golf courses and out of bounds -Getting proper construction works done in a due time 4.Eco-friendly considerations from a viewpoint of cultural environment 1) Well-matched landscape design and events planning 2) Implement of identifications and awarding systerns 3)Acknowledgement of superintendents' qualitications in the maintenance of golf courses 4)Increasing public golf courses and keeping good relationships with the neighbors near golf courses Key words: Pro-environmental development, Golf course.

• Journal of Korean Society on Water Environment
• /
• v.38 no.1
• /
• pp.19-30
• /
• 2022

Climate change has increased the average air temperature. Rising air temperature are absorbed by water bodies, leading to increasing water temperature. Increased water temperature will cause eutrophication and excess algal growth, which will reduce water quality. In this study, long-term trends of air and water temperatures in the Han-river basin over the period of 1997-2020 were discussed to assess the impacts of climate change. Future (~2100s) levels of air temperature were predicted based on the climate change scenarios (Representative concentration pathway (RCP) 2.6, 4.5, 6.0, and 8.5). The results showed that air and water temperatures rose at an average rate of 0.027℃ year^-1 and 0.038℃ year^-1 respectively, over the past 24 years (1997 to 2020). Future air temperatures under RCP 2.6, 4.5, 6.0, and 8.5 increased up to 0.32℃ 1.18℃, 2.14℃, and 3.51℃, respectively. An increasing water temperature could dissolve more minerals from the surrounding rock and will therefore have a higher electrical conductivity. It is the opposite when considering a gas, such as oxygen, dissolved in the water. Water temperature also governs the kinds of organisms that can live in rivers and lakes. Fish, insects, zooplankton, phytoplankton, and other aquatic species all have a preferred temperature range. As temperatures get too far above or below this preferred range, the number of individuals of the species decreases until finally there are none. Therefore, changes of water temperature that are induced by climate change have important implications on water supplies, water quality, and aquatic ecosystems of a watershed.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.3
• /
• pp.119-130
• /
• 2015

Impacts of Argo temperature assimilation on the analysis fields in the East Sea is investigated by using DAESROM, the East Sea Regional Ocean Model with a 3-dimensional variational assimilation module (Kim et al., 2009). Namely, we produced analysis fields in 2009, in which temperature profiles, sea surface temperature (SST) and sea surface height (SSH) anomaly were assimilated (Exp. AllDa) and carried out additional experiment by withdrawing Argo temperature data (Exp. NoArgo). When comparing both experimental results using assimilated temperature profiles, Root Mean Square Error (RMSE) of the Exp. AllDa is generally lower than the Exp. NoArgo. In particular, the Argo impacts are large in the subsurface layer, showing the RMSE difference of about $0.5^{\circ}C$. Based on the observations of 14 surface drifters, Argo impacts on the current and temperature fields in the surface layer are investigated. In general, surface currents along the drifter positions are improved in the Exp. AllDa, and large RMSE differences (about 2.0~6.0 cm/s) between both experiments are found in drifters which observed longer period in the southern region where Argo density was high. On the other hand, Argo impacts on the SST fields are negligible, and it is considered that SST assimilation with 1-day interval has dominant effects. Similar to the difference of surface current fields between both experiments, SSH fields also reveal significant difference in the southern East Sea, for example the southwestern Yamato Basin where anticyclonic circulation develops. The comparison of SSH fields implies that SSH assimilation does not correct the SSH difference caused by withdrawing Argo data. Thus Argo assimilation has an important role to reproduce meso-scale circulation features in the East Sea.

• Journal of Ecology and Environment
• /
• v.31 no.3
• /
• pp.167-176
• /
• 2008

Atmospheric N deposition has far-reaching impacts on forest ecosystems, including on-site impacts such as soil acidification, fertilization, and nutrient imbalances, and off-site environmental impacts such as nitrate leaching and nitrous oxide emission. Although chronic N deposition has been believed to lead to forest N saturation, recent evidence suggests that N retention capacity, particularly in the forest floor, can be surprisingly high even under high N deposition. This review aims to provide an overview of N retention processes in the forest floor and the implications of changing C-N interactions for C sequestration. The fate of available N in forest soils has been explained by the competitive balance between tree roots, soil heterotrophs, and nitrifiers. However, high rates of N retention have been observed in numerous N addition experiments without noticeable increases in tree growth and soil respiration. Alternative hypotheses have been proposed to explain the gap between the input and loss of N in N-enriched, C-limited systems, including abiotic immobilization and mycorrhizal assimilation, both of which do not require additional C sources to incorporate N in soil N pools. Different fates of N in the forest floor have different implications for C sequestration. N-induced tree growth can enhance C accumulation in tree biomass as observed across temperate regions. C loss from forests can amount to or outweigh C gain in N-saturated, declining forests, while another type of 'C-N decoupling' can have positive or neutral effects on soil C sequestration through hampered organic matter decomposition or abiotic N immobilization, respectively.

• Ecology and Resilient Infrastructure
• /
• v.3 no.1
• /
• pp.54-61
• /
• 2016

There are many pilot programs and projects to implement the water quality trading (WQT) policy. But actual trading is relatively rare. The main reason of the scarce applications of WQT policy is the difficulty in determining the equalities between the trading sites. The uncertainty of the impacts of the nonpoint sources pollutant discharges between up and downstream urban development areas also makes the implementation of the policy harder. The simulated results from the watershed modeling program will be used to calculate the point and nonpoint sources pollutants of the future urban development scenarios. The amount of suspended sediments resulting from the urban developments and rainfall intensities will be used to indicate the environmental impacts of the water body between upstream and downstream. The water quality impacts after development scenarios to the outlet of the watershed were transferred to the trading units between two sites. The recommended trading units can be used as a decision support system for policy makers and stakeholders to carry out better WQT practices.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.2
• /
• pp.101-111
• /
• 2006

In the present work, life cycle assessments (LCA) of various waste-plastic recycling methods (material recycling, refused derived fuel (RDF), recycling on furnace, and pyrolytic oil production) were carried out to investigate their impacts on the environment. Six types of impacts were considered. While the impact on global warming was found to be significant, the impact on others were negligible. The impact values on the global warming caused by the material recycling, RDF, and the recycling on furnace were negative, which implied that their impacts could be noticeably reduced when waste-plastic are used as an alternative to newly drawn plastics. The pyrolytic oil production, however, showed positive value, which may be due to the carbon dioxide produced during electric power generation. The pyrolytic oil production had the largest impact on the ozone layer destruction, which was due to ozone depleting substances produced from the process itself. These results can be used as a useful data for the enhancement of waste-plastic recycling.