• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.387-393
• /
• 2021

In this study, finite element analysis was performed to evaluate a method of increasing the fatigue life of the pipe connection structure commonly used in the topside structure of offshore platforms. MSC Patran/Nastran, a commercial analysis program, was used, and the critical structural model was selected from the global analysis. To realize the stress concentration phenomenon according to the load, modeling using 8-node solid elements was implemented. The main loads were considered to be two lateral loads and a tensile load on a diagonal pipe. To check the hotspot stress at the main location, a 0.01 mm dummy shell element was applied. After calculating the main stress at the 0.5-t and 1.5-t locations, the stress generated in the weld was estimated through extrapolation. In some sections, this stress was observed to be below the fatigue life that should be satisfied, and reinforcement was required. For reinforcement, a bracket was added to reduce the stress concentration factor where the fatigue life was insufficient without changing the thickness or diameter of the previously designed pipe. Regarding the tensile load, the stress in the bracket toe increased by 23 %, whereas the stress inside and outside of the pipe, which was a problem, decreased by approximately 8 %. Regarding the flexural load, the stress at the bracket toe increased by 3 %, whereas the stress inside and outside of the pipe, which was also a problem, decreased by approximately 48 %. Owing to the new bracket reinforcement, the stress in the bracket toe increased, but the S-N curve itself was better than that of the pipe joint, so it was not a significant problem. The improvement method of fatigue life is expected to be useful; it can efficiently increase the fatigue life while minimizing changes to the initial design.

• Korean Journal of Environment and Ecology
• /
• v.32 no.6
• /
• pp.686-697
• /
• 2018

Due to the advance in remote sensing technology, it has become easier to more frequently obtain high resolution imagery to detect delicate changes in an extensive area, particularly including forest which is not readily sub-classified. Time-series analysis on high resolution images requires to collect extensive amount of ground truth data. In this study, the potential of land coverage mapas ground truth data was tested in classifying high-resolution imagery. The study site was Wonju-si at Gangwon-do, South Korea, having a mix of urban and natural areas. KOMPSAT-3A imagery taken on March 2015 and land coverage map published in 2017 were used as source data. Two pixel-based classification algorithms, Support Vector Machine (SVM) and Random Forest (RF), were selected for the analysis. Forest only classification was compared with that of the whole study area except wetland. Confusion matrixes from the classification presented that overall accuracies for both the targets were higher in RF algorithm than in SVM. While the overall accuracy in the forest only analysis by RF algorithm was higher by 18.3% than SVM, in the case of the whole region analysis, the difference was relatively smaller by 5.5%. For the SVM algorithm, adding the Majority analysis process indicated a marginal improvement of about 1% than the normal SVM analysis. It was found that the RF algorithm was more effective to identify the broad-leaved forest within the forest, but for the other classes the SVM algorithm was more effective. As the two pixel-based classification algorithms were tested here, it is expected that future classification will improve the overall accuracy and the reliability by introducing a time-series analysis and an object-based algorithm. It is considered that this approach will contribute to improving a large-scale land planning by providing an effective land classification method on higher spatial and temporal scales.

• (The)Korea Educational Review
• /
• v.15 no.1
• /
• pp.107-132
• /
• 2009

What is good instruction? The term "instruction" means the essential activity of school education, a precondition for good school, and the starting point of reforming school education. The purpose of this study is to investigate the meaning of "good instruction" by examining the difference of perception between in-service teachers and pre-service teachers who encompass the viewpoint of both teacher and student using open-ended questionnaires asking the type of instruction that they have to avoid and the undesirable instruction. This study was carried out with 150 teachers who were working in the schools and 160 students who were in college of education to be teacher in the future. Collected data was analyzed using the QSR Nvivo qualitative program. The findings of this study indicates the followings: First, the most undesirable class cited by in-service teachers was the class that applies uniform instructional strategy, followed by class based on directions instruction, unsystematic class, class characterized by lack of teaching competency, class that emphasizes test scores and competition, class that are not interactive enough, class that does not consider the level of students, class in which students are not respected, class that have poor educational environment, and the class in which little support is provided. Second, the most undesirable class cited by pre-service teachers was the class that applies uniform instructional strategy, followed by unsystematic class, class characterized by lack of teaching competency, class based on directions instruction, class in which students are not respected, class that emphasizes test scores and competition, class that does not consider the level of students, class that are not interactive enough, class that have poor educational environment, and the class in which little support is provided. Third, this study examined the difference of perception between in-service teachers and pre-service teachers toward the undesirable class that they have to avoid. In terms of the integrated rank that is common among in-service teachers and pre-service teachers, the most undesirable class that they have to avoid was the class that applies uniform instructional strategy, unsystematic class, class based on directions instruction, and class characterized by lack of teaching competency. The findings of this study may be used as a basis for in-service teachers to reflect on their professionalism of instruction that they provide and examine the attitude of students toward instruction, while providing a practical guideline for pre-service teachers to design and ensure systematic instruction in the future.

• Korean Journal of Environment and Ecology
• /
• v.33 no.4
• /
• pp.472-480
• /
• 2019

Selection of the plant material for planting to reduce fine dust should comprehensively consider the visual characteristics, such as the shape and texture of the plant leaves and form of bark, which affect the adsorption function of the plant. However, previous studies on reduction of fine dust through plants have focused on the absorption function rather than the adsorption function of plants and on foliage plants, which are indoor plants, rather than the outdoor plants. In particular, the criterion for selection of fine dust reduction species is not specific, so research on the selection criteria for plant materials for fine dust reduction in urban areas is needed. The purpose of this study is to identify the priorities of eight indicators that affect the fine dust reduction by using the fuzzy multi-criteria decision-making model (MCDM) and establish the tree selection criteria for the urban planting to reduce fine dust. For the purpose, we conducted a questionnaire survey of those who majored in fine dust-related academic fields and those with experience of researching fine dust. A result of the survey showed that the area of leaf and the tree species received the highest score as the factors that affect the fine dust reduction. They were followed by the surface roughness of leaves, tree height, growth rate, complexity of leaves, edge shape of leaves, and bark feature in that order. When selecting the species that have leaves with the coarse surface, it is better to select the trees with wooly, glossy, and waxy layers on the leaves. When considering the shape of the leaves, it is better to select the two-type or three-type leaves and palm-shaped leaves than the single-type leaves and to select the serrated leaves than the smooth edged leaves to increase the surface area for adsorbing fine dust in the air on the surface of the leaves. When considering the characteristics of the bark, it is better to select trees that have cork layers or show or are likely to show the bark loosening or cracks than to select those with lenticel or patterned barks. This study is significant in that it presents the priorities of the selection criteria of plant material based on the visual characteristics that affect the adsorption of fine dust for the planning of planting to reduce fine dust in the urban area. The results of this study can be used as basic data for the selection of trees for plantation planning in the urban area.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.473-483
• /
• 2018

In this study, we have developed a lab scale bioreactor to identify the characteristics of nitrification reaction according to operation condition (temperature, inhibitor (as Cl), activated nitrifying bacteria (ANB). etc) to improve nitrification efficiency at low temperature. Recovery rate of nitrification took about 4 days to reach the normal level by injected ANB after inhibition shock of CI injection at $20^{\circ}C$, when measured the concentration of $NO_2{^-}-N+NO_3{^-}-N$ in the effluent. In the case of $10^{\circ}C$, recovery of nitrification rate took about 4 days to reach the level of half to the normal level and 7 days for complete recovery which took 3 days more than those at $20^{\circ}C$. At $10^{\circ}C$ considering the winter season, the specific nitrification rate(SNR) of the from 1 day to 6 days after injected ANB according to its operation condition increased from 0.029 to 0.767 mgN/gSS/hr. The simulated SNR for the 8th day after the injected ANB at $10^{\circ}C$ was 0.840, 3.625 mgN/gSS/hr, respectively as linear function and exponential function, expecting to exceed level of 2.592 mgN/gSS/hr at normal condition. It was confirmed that injection of ANB during low temperature operation has many effects for improving nitrification efficiency through this study. In future studies, if further studies are carried out the determination of ANB injection and the design of efficient ANB reactor considering the changes of operating characteristics by site, it will contribute to the improvement of nitrification efficiency in winter season.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.1
• /
• pp.19-29
• /
• 2022

The result of a questionnaire survey conducted on fishermen using coastal fish traps shows that fall accidents during trap dropping and pulling constitute the highest proportion of accidents at 42.1 %, whereas slipping accidents on the deck or stricture accidents to the body due to the trap winding device constitute 21.1 % each. In addition, 53.2 % of all surveyed subjects responded that trap pulling is the most dangerous task, followed by fish sorting 33.8 %, and trap dropping 9.1 %. As for the main items requested by fishermen for improving the trap winding device, 36.8 % indicated a method to easily lift the trap from the water to the work deck, and 31.6 % indicated a method to overcome the rope tension and prevent slip when pulling the trap to reduce the accidents. The small trap fishing vessel winding device proposed herein can increase the winding force by strengthening the rope contact area and friction coefficient via an appropriate contact angle between the driving roller of the winding device and the rope. When the contact angles between the driving roller and the rope are 1°, 5°, 9°, 14° and 19°, the rope tension showed a difference according to each contact angle. When the contact angle is 9°, the rope tension is the highest at 392.62 kgf. Based on these experimental results, a prototype winding device is manufactured, and 25 traps are installed on a rope with a total length of 100 m at 4 m intervals in the sea, and then the rope tension is measured during trap pulling. As a result, the rope tension increases rapidly at the initial stage of trap pulling and shows the highest value of 31.89 kgf, which subsequently decreases significantly. Therefore, it is appropriate to design the winding force of a small trap fishing vessel winding device based on the maximum tension value of the rope specified at the beginning of the trap pulling operation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.2
• /
• pp.138-148
• /
• 2022

The 1920s and 1930s were when new trends became prominent in Korean housing architecture. This study began with a curiosity about the appearance of residential gardens during the transition period, when housing types were changing. Since gardens are constantly evolving and living spaces, it is not easy to give a clear picture of their evolution. However, through popular magazines and newspaper articles published in the 1920-30s, this study investigated how people perceived the gardens socially and how they engaged in gardening. First, the study of Gyeongseong's urbanization process revealed that people perceived gardens as a way to give natural beauty to the urban environment. Therefore, the creation of a residential garden was strongly encouraged. Second, the housing improvement movement, which the architects actively discussed during this period, emphasized that a garden is a factor that can help improve the quality of the residential environment in terms of hygiene and landscape aesthetics. Third, since the media provided information on gardening, it was confirmed that the number of people engaged in gardening as a hobby increased. As designers and gardeners who had received a modern education became more active, the concept of "designed gardens" was formed. Lastly, although the houses were divided into various types, the shapes of the gardens did not show a significant difference according to the architecture type. They tended to embrace the time's ideal garden design and style. Therefore, even in a traditional hanok, Western-style gardens were naturally harmonized into the overall architecture, and exotic plant species could be found. Although the gardens found in media images were limited to those belonging to the homes of the intelligentsia, it can be seen that representativeness was secured, considering the popularity and ripple effect of the media. Therefore, this study contributes to the literature as it confirmed the ideal gardens and gardening methods in the 1920s and 30s.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1216-1221
• /
• 2022

Ships tend to be larger to increase the efficiency of cargo transportation. Larger ships lead to increased travel time for ship workers, increased work intensity, and reduced work efficiency. Problems such as increased work intensity are reducing the influx of young people into labor, along with the phenomenon of avoidance of high intensity labor by the younger generation. In addition, the rapid aging of the population and decrease in the young labor force aggravate the labor shortage problem in the maritime industry. To overcome this, the maritime industry has recently introduced technologies such as an intelligent production design platform and a smart production operation management system, and a smart autonomous logistics system in one of these technologies. The smart autonomous logistics system is a technology that delivers various goods using intelligent mobile robots, and enables the robot to drive itself by using sensors such as lidar and camera. Therefore, in this paper, it was checked whether the mobile robot could autonomously drive to the stop sign by detecting the passage way of the ship deck. The autonomous driving was performed by detecting the passage way of the ship deck through the camera mounted on the mobile robot based on the data learned through Nvidia's End-to-end learning. The mobile robot was stopped by checking the stop sign using SSD MobileNetV2. The experiment was repeated five times in which the mobile robot autonomously drives to the stop sign without deviation from the ship deck passage way at a distance of about 70m. As a result of the experiment, it was confirmed that the mobile robot was driven without deviation from passage way. If the smart autonomous logistics system to which this result is applied is used in the marine industry, it is thought that the stability, reduction of labor force, and work efficiency will be improved when workers work.

• Korean Association of Arts Management
• /
• no.51
• /
• pp.5-34
• /
• 2019

This study is a qualitative study conducted to identify environmental factors that impede emerging artists' ongoing creative activities, focusing on the local cultural ecosystem that they are part of. By doing so, we tried to understand the dynamics between key stake holders in the ecosystem that these young artists interact with and how they build and perceive their own, local cultural environment. The central research question of this study is: what factors impede the continuous creative activities of young artists and what causes them to leave local art scenes? The research was conducted thoroughly on the basis of emerging artists' experience and perspectives and applied to Creative Sector Holistic Model for analysis. The data of this research were collected based on two national-funding projects to support young artists from 2016 to 2018. The main research method of this study was interviews: official and casual interviews were executed with 29 young artists aged 20-34 who work in the fields of painting, literature, sculpture, video, korean traditional music, visual design and crafts. For the analysis of the data, the Creative Sector Holistic Model(Wyszomirski, 2008), which had applied the ecological logic to the creative industries, was applied. The result of this study shows that economic difficulties were not the only hindering factor in their sustainable art-making process. Various impeding factors derived from the local cultural ecosystem have been identified within the Holistic Model, demonstrating that these factors are all intertwined and connected. Thus, analyzing and understanding one's local cultural ecosystem can provide keys to long-term and lasting impacts when a local authorities wish to support young artists for the future of local cultural environment.

• Korean Journal of Environment and Ecology
• /
• v.37 no.3
• /
• pp.221-231
• /
• 2023

Great tit (Parus major) is a bioindicator species that can measure environmental changes in urban ecosystems and plays an important role in maintaining health as a representative insectivorous bird. Researchers have utilized artificial nest box surveys to understand the reproductive ecology of the Paridae family of birds, including the Great tits, but it is difficult to conduct a macroscopic study due to spatial and temporal limitations. This study designed and applied a citizen-participatory monitoring of artificial nest boxes project to transcend the limitations of expert-centered monitoring methods. The Suwon Front Yard Bird Monitoring Team installed artificial nest boxes in green spaces in Suwon, Gyeonggi Province and observed the reproductive ecology of the Paridae family through the participation of voluntary citizen surveyors. Participants were recruited through an online survey from February 9 to February 22, 2021, and they directly performed from installation to observation of artificial next boxes from February 23 to August 31, 2021. Online education was provided to the volunteers for the entire monitoring process to lower the entry barrier for non-expert citizen surveyors and collect consistent data, and observation records were collected through a mobile app. A total of 98 citizen surveyors participated in the citizen-participatory monitoring of artificial nest boxes project, and 175 (84.95%) of the 256 distributed artificial nest boxes were installed in green spaces in Suwon City. Among the installed artificial nest boxes, the results of the citizen science project were confirmed for 173 (83.98%), excluding two boxes with position coordinate generation errors. A total of 987 artificial nest box observation records were collected from citizen surveyors, with a minimum of one time, a maximum of 26 times, and an average of 5.71±4.37 times. The number of observations of artificial birdhouses per month was 70 times (7.09%) in February, 444 times (44.98%) in March, 284 times (28.77%) in April, 133 times (13.48%) in May, 46 times (4.66%) in June, 6 times (0.61%) in July, and 4 times (0.41%) in August. Birds using the artificial nest boxes were observed in 57 (32.95%) of the 173 installed artificial nest boxes, and they included Great tit (Parus major) using 12 boxes (21.05%), Varied Tit (Parus varius) using 7 boxes (12.28%), and unidentified birds using 38 boxes (66.67%). This study is the first to consider citizen participation in the monitoring of artificial nest boxes, a survey method for the reproductive ecology of the Paridae family, including Great tits, and it can be utilized as basic data for the design of ecological monitoring combined with citizen science in the future.