• 제목/요약/키워드: Envi-Met Model

검색결과 34건 처리시간 0.022초

토지이용 유형별 공간특성을 고려한 ENVI-met 모델의 현장측정자료 기반의 검증 (Validation of ENVI-met Model with In Situ Measurements Considering Spatial Characteristics of Land Use Types)

  • 송봉근;박경훈;정성관
    • 한국지리정보학회지
    • /
    • 제17권2호
    • /
    • pp.156-172
    • /
    • 2014
  • 본 연구는 미기후 분석 프로그램인 ENVI-met 모델의 정확도를 검증하기 위해 경상남도 창원시를 대상으로 도시지역의 주요 토지이용 유형별 공간특성을 고려하여 선정된 조사구역의 현장측정 기상자료와 비교하였다. 현장측정은 주간시간대 2일, 야간시간대 1일 총 3일간이동식으로 측정하였고, ENVI-met 모델링은 현장측정과 동일한 시간대로 설정하여 수행하였다. 측정항목별 분석결과에 따르면, 주간시간대의 순복사에너지는 ENVI-met 모델링이 현장측정값보다 약 $300Wm^{-2}$ 정도 높았고, 야간시간대는 현장측정값이 $200Wm^{-2}$ 정도 더 높았다. 기온은 주간 및 야간 시간대 모두 현장 측정값이 약 $3{\sim}6^{\circ}C$ 정도 더 높은 것으로 분석되었다. 표면온도도 현장측정값이 ENVI-met 모델링보다 약 $7{\sim}13^{\circ}C$ 더 높았다. 풍속은 ENVI-met 모델링과 현장측정값 간의 차이가 매우 큰 것으로 나타났다. 회귀분석 결과에서는 기온자료의 $R^2$값이 약 0.6정도로 비교적 높게 나타난 반면에, 나머지 순복사에너지와 표면온도, 풍속은 낮은 상관성을 보였다. 이는 ENVI-met 모델링이 태양 및 지구복사에너지를 과대 또는 과소 예측하고 있으며, 모델링 및 현장측정을 위해 선정된 조사구역들을 둘러싸고 있는 인접한 주변 지역의 공간구조적, 미기후적 특성 차이에 의한 영향으로 판단된다. 따라서 향후 이에 대한 보다 면밀한 실증적 연구가 필요할 것으로 판단된다.

CALMET 및 ENVI-MET를 이용한 산업단지 입지에 따른 국지 바람장 분석 (An Analysis of Local Wind Field by Location of Industrial Complex using CALMET and ENVI-MET)

  • 송동웅
    • 환경영향평가
    • /
    • 제21권3호
    • /
    • pp.417-429
    • /
    • 2012
  • In this study, a diagnostic wind model, CALMET and a micrometeorological numerical model, ENVI-MET were used to analyze the wind field in and out of the site designated for the industrial complex around Buron-myeon, Wonju, Gangwon-do. The results of modeling with CALMET showed that the air flow in industrial complex was little affected by the surrounding terrain. And the result of wind field analysis with ENVI-MET showed there are turbulent air flows such as cavity and wake around structures in the industrial complex, which can cause high-air pollution. Therefore, it is necessary to design the industrial complex considering the wind path according to wind directions.

WRF와 ENVI-met 수치 모델을 이용한 산악지형의 바람장 변화 모사 (Simulations of Changes in Wind Field Over Mountainous Terrains Using WRF and ENVI-met Numerical Models)

  • 원명수;한선호
    • 한국농림기상학회지
    • /
    • 제15권1호
    • /
    • pp.17-25
    • /
    • 2013
  • 본 연구는 복잡한 산악지형에서 바람장 변화를 해석하고, 산불발생시 확산방향을 예측하여 산불방지 전략에 활용하기 위해서 수행되었다. 연구 대상지는 2000년 4월 7일 산불이 발생하여 10일간 진행되었던 삼척지역을 대상으로 하였다. 삼척 산불피해지는 복잡한 산악구조를 가지고 있는데 먼저 중규모 기상 모델인 WRF를 사용하여 대상지에 설치한 AWS(4 지점)의 관측결과와 비교하였다. WRF 모의 결과, 4개 지점의 풍속은 AWS 관측지점의 풍속에 비해 5~8m/s(200% 과대평가) 강하였으며, 관측된 풍향은 지점마다 다양하게 나타난 것에 비해 모의된 풍향은 모든 지점에서 서풍계열로 나타났다. 결과적으로 WRF와 같은 중규모 기상모델은 복잡한 산악지형에서의 바람장 변화를 잘 모의하지 못하였다. 이러한 문제점을 해결하기 위해 미기상 대기유동장 수치모형인 ENVI-met 프로그램을 이용하여 지표면 높이에서 삼척 LTER 지역의 국지규모 바람장을 모의하였다. 지형효과에 의한 모델의 민감도를 위해 다양한 초기 조건(기류, 온 습도, 대기난류, 토양 및 식생 모형)들을 고려하여 분석하였다. ENVI-met 모의결과, 풍속은 실측과 비교할 때 약 70%의 정확도를 보였으며, 풍향은 계곡부와 능선부에서 지형효과로 인한 변화를 잘 반영하였다. 향후 ENVI-met은 산불확산예측 및 산불방지전략 수립을 위해 미기상 대기유동장 수치모형을 이용하여 산악지역의 미기상 해석에 관한 연구가 필요할 것으로 판단된다.

A Comparison between In-situ PET and ENVI-met PET for Evaluating Outdoor Thermal Comfort

  • Jeong, Da-in;Park, Kyung-hun;Song, Bong-guen
    • KIEAE Journal
    • /
    • 제16권1호
    • /
    • pp.11-19
    • /
    • 2016
  • Purpose: PMV, PET, and similar thermal comfort indices and microclimate modeling have recently become actively used to evaluate thermal comfort. This study will look at pedestrian roads with diverse spatial characteristics on university campus using the ENVI-met model as the base for onsite measurement. Method: The PET was used as the thermal comfort index. The first microclimate measures were collected on September 20, 2014, and the second microclimate measures were collected on June 1, 2015. The ENVI-met model was used at the same time. Result: As a results, Onsite measurement results differed depending on the PET spatial characteristics. The location associated with the most discomfort had a PET of $47.8^{\circ}C$. The spatial characteristics of this place included a with no shade. The most comfortable location had shade, and the PET was $24.6^{\circ}C$. When the ENVI-met model and onsite measurements were compared, similar patterns were found, but with a few differences at specific points; this was due to the limitation of using input materials such as trees, buildings, and covering materials with the ENVI-met model. This factor must be thoroughly considered when analyzing modeling results.

Envi-met 모델을 이용한 도심지역 대기오염측정망 주변의 바람장 분석 (An Analysis of Wind Field around the Air Quality Monitoring Station in the Urban Area by Using the Envi-met Model)

  • 김민경;이화운;도우곤;정우식
    • 한국환경과학회지
    • /
    • 제18권9호
    • /
    • pp.941-952
    • /
    • 2009
  • The urban microscale wind field around the air quality monitoring station was investigated in order to check how a building complex influences it. For this study as the high density areas Jwa-dong and Yeonsan-dong monitoring sites in Busan were chosen. As the direction of inflow which is perpendicular to the building of the monitoring station was expected to cause the considerable variation of the wind field, that direction was selected. The model Envi-met was used as the diagnostic numerical model for this study. It is suitable for this investigation because Envi-met has the microscale resolution. After simulating it, on the leeward side around a building complex the decrease of flow velocity and some of vortexes or circulation area were discovered. In addition, on the edge of the top at the building and at the back of the building the upward flow was developed. If the sampling hole of monitoring site were located in this upward flow, it would be under the influence of upward flow from the near street.

개발에 따른 지형변화가 국지 바람장에 미치는 영향 분석 - Envi-met 모형을 이용한 수치모의 - (An Analysis on Influence of Geographical Variation Induced by Development Affecting to the Local Scale Wind Environment - Numerical Simulation using the Envi-met Model -)

  • 정우식;박종길;이화운
    • 한국대기환경학회지
    • /
    • 제22권6호
    • /
    • pp.888-903
    • /
    • 2006
  • This study analyze the change of wind pattern and intensity according to the transform of surface conditions, such as land use and height of terrain, over the leeward region. In order to do this, we have employed 'Envi-met' microscale atmospheric numerical model. When the same wind condition is considered, the wind speed of base case having natural surface condition of Chunsudae shows the weakest strength among different cases such as the 'bare case' and the '20 m case' which the plants is removed and the height of terrain is flatted as 20 m above the sea level over the Chunsudae, respectively. The weakening of wind speed is a maximum of $4{\sim}8 m/s$ when the inflow wind speed is 55 m/s.

Envi-Met 모델을 이용한 공동주택단지의 미기후 환경 개선방향에 관한 연구 (A Study on the microclimate Improvement of an apartment complex using the Envi-Met model)

  • 김중권;정응호;김대욱;류지원;차재규
    • 한국주거학회:학술대회논문집
    • /
    • 한국주거학회 2008년도 춘계학술발표대회 논문집
    • /
    • pp.297-302
    • /
    • 2008
  • Urbanization has caused population influx into cities, creating housing problems, and housing developmental plans have often resulted in high-rise and high-density housing complexes. Such development have seldom incorporated the environmental factors associated with the complexes and the surroundings, just being busy in increasing the volume of the housing supplies, and as a result, various environmental problems, such as disruption of the air flow, reduction of sunlight exposure amount, and temperature rise, have occurred, deteriorating the living environments. Accordingly, the objectives of this paper are to find out the causes of the problems in the contemporary complex development plans from the urban environmental viewpoint through the investigative analysis of microclimate environment in those complexes, and, further, to present a residential complex planning technique and developmental direction so as to remedy the problems described above. Then a 3-D microclimate model 'Envi-Met' was employed to analyze and predict on the related issues, per the selected planning factors.

  • PDF

Envi-Met.을 이용한 도심 대기경계층 내 확산장 변화 수치 모의 (Diffusion Simulation Using Envi-Met. in Urban Planetary Boundary Layer)

  • 최현정
    • 한국기후변화학회지
    • /
    • 제7권3호
    • /
    • pp.357-371
    • /
    • 2016
  • Buildings in the city acts as a cause of distorted wind direction, wind speed, causing the stagnation of the air flow. In the recent trend of climate change can not but consider the temperature rise of the urbanization. This study was aimed to analyze the thermal comfort of planetary boundary layer in different artificial constructions areas which has a direct impact on urban climate, and estimating the warming phenomena. Envi-met model was used to consider the urban structure associated with urban growth in order to precisely determine the impact of the building on the city weather condition. The analyzed values of thermal comfort index were temperature, wind speed, horizontal and vertical turbulent diffusivity. In particular, analysis of the PPD(Predicted Percentage of Dissatisfied) represents the human thermal comfort. In this study, by adjusting the arrangement and proportion of the top floor building in the urban it was found that the inflow of the fresh air and cooling can be derived low PPD. Vertical heat flux amount of the city caused by climate change was a factor to form a high potential temperature in the city and the accumulation of cold air does not appear near the surface. Based on this, to make the city effectively respond to climate change may require a long-term restructuring of urban spatial structure and density management.