• Applied Microscopy
• /
• v.52
• /
• pp.6.1-6.5
• /
• 2022

We examined the morphology of the fertilized egg and the fine structure of fertilized egg envelopes of Poropanchax normani belonging to the family Poeciliidae, also known as Norman's lampeye using light and electron microscopes. The fertilized eggs with narrow perivitelline space were found to be spherical and demersal, additionally containing small oil droplets in the vitelline membrane. Further, a bundle of adhesive filaments was observed to be present on one side of the fertilized egg. These filaments possessed remarkably high elasticity and were approximately 1-3mm in length. The size of the fertilized egg was determined to be about 1.49 ± 0.07mm (n=30). The outer surface appeared smooth, and adhesive filaments originating at different location of the surface of the envelope were found to be distributed around the egg envelope and were joined together to form a single long bundle in scanning electron microscopic observation. A peak-like structure formed of several straight wrinkles was observed around the micropyle. However, the complete structure of the micropyle could not be studied due to the depth at which it was located. Additionally, the total thickness of the egg envelope was ascertained to be approximately12.5-14.5㎛. The egg envelope consisted of two distinct layers, an outer electron dense layer and an inner lamellar layer, further consisting of 10 sublayers of varying thicknesses. Collectively, it was observed that the morphological characteristics of the fertilized egg, fine structures surrounding the micropyle, outer surface, adhesive structure consisting adhesive filaments, and sections of fertilized egg envelope displayed species specificity.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.13 no.11
• /
• pp.1156-1164
• /
• 2001

This study aims to suggest envelope structure which can improve the insulation performance of cold storage warehouse with cost effectiveness. Envelope structures are classified and economical efficiency of each type is evaluated to the model warehouse. As results, type 3 (PC wall) and 4(sandwich panel wall) have benefits to the middle/large (lifetime of 25 years) and small (lifetime of 12∼13 years) warehouse, respectively.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.8
• /
• pp.137-147
• /
• 1994

In this paper,we propose a knowledge-based system for locating Destination Address Block(DAB) by analyzing the structure of Korean envelope images. In the proposed system the preprocessing steps such as adaptive binarization connected component extraction and deskewing are carried out first for the effective structure analysis of the envelope image. Then DAB containing address name and zipcode parts of the input envelope image is extracted by an iterative procedure based on the knowledge acquired from the statistical feature analysis of the various envelope images. Most of the system for slocating address blocks on envelopes have extracted DAB by segmenting an envelope image into several candidate blocks followed by selecting one among the candidate blocks. Because it is very difficult to segment a Korean envelope image into several blocks due to the specific writing habits that the addresses on the envelope are written in close proximity to each other the proposed iterative procedure determines DAB by splitting or merging the connected components and verifies the determined DAB without segmentation and selection. Experiments with a great number of the live envelopes provided from Seoul Mail Center in Koorea were carried out. The results reveal that the proposed system is very effective for address block location on Korean envelopes.

• Korean Journal of Ichthyology
• /
• v.13 no.1
• /
• pp.19-23
• /
• 2001

The full-grown oocyte envelope of the two spined loaches, Niwaella multifasciata and Kichulchoia brevifasciata, was examined by electron microscopy. The oocyte is surrounded by its envelope, and an external modification (an adhesive structure) in the surface of the envelope is present. The envelope consists of two layers, a zona radiata externa which is the site of the adhesive structure, and a zona radiata interna, which has heterogeneous, electron-dense multi layers. The surface (zona radiata externa) of the envelope in N. multifasciata is equipped with short villuslike protuberances, which have a length of 1.5~2.5 ${\mu}m$ and are separated from each other by a distance of 2~2.5 ${\mu}m$. In contrast, K. brevifasciata has undulating or wave-like structures that extend over the entire oocyte surface. The waves are 1.5~2.5 ${\mu}m$ in length and are separated a distance of 2.5~3.3 ${\mu}m$ from each other.

• Communications of the Korean Mathematical Society
• /
• v.18 no.3
• /
• pp.491-499
• /
• 2003

The Banach envelope of $WeakL_1$ contains a complemented Banach sublattice that is isometrically isomorphic to Lp($\mu$) space.

• The Journal of Korean Society of Virology
• /
• v.27 no.2
• /
• pp.209-216
• /
• 1997

Three dimensional structures of envelope protein from Korean isolates and Nakayama-NIH strain of Japanese encephalitis virus (JEV) were deduced by a computer program (HyperChem 4.0 Chemplus 1.0) based on the data of the three dimentional structure of Tick-borne encephalitis virus. In the three dimensional structure of envelope protein, neutralizing epitope and T-helper cell recognition site of C-terminal region of Korean isolates were structually similar to those of Nakayama-NIH but the N-terminal region was not. Korean JE isolates were compared with Nakayama-NIH strain by using cross-neutralization antibody test. Neutralizing activities of Korean isolates derived from guinea pigs were higher than those of Nakayama-NIH strain against Korean isolates, although the polyclonal antibody titers of Nakayama-NlH showed 1:160 to 1:640 against Korean isolates. According to the results from three dimentional structures and cross-neutralization analyses, the antigenic difference between Korean JE isolates and Nakayama-NIH strain may be dependent on structural difference of envelope protein.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.113-119
• /
• 2004

As Building Integrated Photovoltaic(BIPV) system replaces the conventional building finishing materials with PV modules, two function of electricity generation and building envelope can be expected. Therefore BIPV can be a good alternative technology for the 21 century environment-friendly buildings. The objective of this paper is to develope BIPV modules for a commercial buildings of which structure is mainly light-weight, curtain wall system. Two types of module are developed for a opaque part and a transparent part of building envelope. Current technology level and market status of Korea determines the configuration of developed BIPV modules. Architectural considerations for the integration of PV module to building envelope such as building structure, construction type, safety, regulation, maintenance etc. have been carefully reflected from the early stage of BIPV module design. Especially the survey result of current building envelope materials determines the size of unit BIPV modules and a unique cladding method for PV module installation is developed. Trial product of BIPV modules and cladding hardwares are manufactured and sample construction details for a demonstration building are proposed.

• Journal of Welding and Joining
• /
• v.27 no.6
• /
• pp.55-61
• /
• 2009

This study aims for determination of cutting work envelope of an articular robot for H-beam cutting. The robot has its own work envelope. The cutting of piece with groove requires the specific position of the torch which contracts the work envelope. This study suggested the new method to determine the cutting work envelope for this case. The method simplified the problem by use of the combination of inverse kinematics and forward kinematics. The method was used for cutting the H-beam with groove. The cutting work envelope was determined easily. The result was verified by 3D simulation system which implements the articular robot with 6 axes and the H-beam in the virtual shop.

• Applied Microscopy
• /
• v.50
• /
• pp.13.1-13.7
• /
• 2020

We examined the morphology of fertilized egg and ultrastructures of fertilized egg envelopes of Ancistrus cirrhosus belong to Loricariidae using light and electron microscopes. The fertilized eggs formed a mass on the spawning place and were yellowish, spherical, non-transparent, demersal, adhesive, and a narrow perivitelline space. But, the adhesiveness of fertilized eggs was disappeared after spawning excluding contact parts. The micropyle with funnel shape was surrounded by 15-19 furrow lines of egg envelope in a spoke-like pattern. The outer surface of egg envelope has smooth side and inner surface of egg envelope was rough with grooves. Also, the total thickness of the fertilized egg envelope was about 32.58 ± 0.85 ㎛ (n = 20), and the fertilized egg envelope consisted of three layers, an outer adhesive electron-dense layer, a middle layer with low electron density and an inner electron-dense layer with grooves in counter structure from other most teleost. Collectively, these morphological characteristics and adhesive property of fertilized egg, and ultrastructures of micropyle, outer surface, and section of fertilized egg envelope are showed species specificity.

• Communications of the Korean Mathematical Society
• /
• v.22 no.2
• /
• pp.209-218
• /
• 2007

In this paper we investigate the ${\ell}^p$ space structure of the Banach envelope of $WeakL_1$. In particular, the Banach envelope of $WeakL_1$ contains a complemented Banach sublattice that is isometrically isomorphic to the nonseparable Banach lattice ${\ell}^p$, ($1{\leq}p<\infty$) as well as the separable case.