• 한국농공학회지
• /
• 제37권5호
• /
• pp.53-61
• /
• 1995

Analyses of subsurface drainage effects of farmland with respect to pipe and envelop material are made by the laboratory experiments using soil box to give basic information for the subsurface drainage system planning and design. Three different diameter PVC perforated pipes and a mesh pipe are used with envelop materials such as sand, rice bran, and crushed stone. Steady state subsurface drainage flow rate increased as envelop material changed from sand to rice bran and crushed stone. This indicates that as the hydraulic conductivity of the envelop material increases, the drainage flow rate increases. On the other hand, for a given envelop material, the mesh pipe which has the largest openning area shows the largest flow rate while small diameter PVC pipes show small flow rates. This tells that as the openning area and pipe diameter increase, the flow rate increases, too. Therefore, selection of pipe and envelop material should be made in accordance with the design drainage flow rate. Unsteady state subsurface drainage flow rate with respect to time differs for different envelop material. In case the sand was used as an envelop material, the small diameter PVC pipes show larger flow rates than the large diameter PVC pipe and mesh pipe. When the rice bran was used, the mesh pipe shows the largest flow rate, while small diameter pipes show smaller flow rates. In case the crushed stone was used as an envelop material, the large diameter PVC pipe and mesh pipe show larger flow rates, while small diameter pipes show a little bit smaller flow rates. However, the variation of flow rates among different pipes is the smallest when the crushed stone is used. The flow rate curve with respect to the pipe changes little for the crushed stone envelop which has a large hydraulic conductivity, while that changes much for the sand and rice bran envelops. However, it is difficult to draw a consistent relationship between the drainage flow rate and pipe for all the envelop materials. Since the subsurface drainage experiments are made only under the restricted laboratory condition in this study, further study including field experiment is required.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2006년도 추계학술발표대회 논문집
• /
• pp.306-309
• /
• 2006

The architectural difference between the existing residence and high-rise residential building causes changes on environmental conditions such as ventilation and insulation. The object of this study is to present the improvement on envelop of high-rise residential buildings to reduce heating and cooling load. To improve the environmental performance of envelop, it is necessary to modify envelop vent system and ensure intermediate space. In this study, the shape of vents in high-rise residential buildings has been inspected, and the survey about the interior environmental conditions related to the envelop of high-rise residential building has been conducted. Environmental measurement has been done to examine out door air quality for natural ventilation.

• 한국실내디자인학회논문집
• /
• 제22권6호
• /
• pp.29-39
• /
• 2013

Architecture has been expressed a complexity of their civilization with evolving into a living spaces and a crystalloid of culture in the times. So, architecture is always a dramatic phenomenon related to architectural aesthetic and technical expression in harmony with social and cultural issues by the times. From this point of view, we can describe that architecture is one of an important mediators to analyze the integrated trend of time. Specially an expressed building envelop which is a matter of consequence in the architectural component is first visual factor including architectural meaning and historical back ground. Therefore, this study firstly starts an investment for discriminative characteristics of building envelop design in the times, then will take the comparative analysis related with modern age and contemporary age based on phases of the times. This research will give the chance to prepare of the pillar of future envelop design in the practical affairs and has simultaneously the chance to understand of inclusive envelop design methodology by the changes of the times.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.65-70
• /
• 2001

During the summer season, it is very hot and humid in Korea. So the humidity is an important factor regarding the environmental control function of building envelops. The purpose of this research is to measure and analyze the characteristics of such environmental factors as relative humidity, dry bulb temperature and air velocity varies both in the clay and cement envelop structures using granite dome models during the summer time. The interior relative humidity of the clay model is constant regardless of exterior humidity although a little range of variation is shown in comparison to the cement model.

• 한국통신학회논문지
• /
• 제32권4C호
• /
• pp.355-361
• /
• 2007

본 논문에서 정규화 포락선 검파 기법(NED ; Normalized Envelop Detection)과 얼리-레이트 필터(ELF ; Early-Late Filter)가 적용된 새로운 홉 타이밍 예측기를 제안하였다. 제안한 구조의 성능 검증을 위해 컴퓨터 시뮬레이션으로 제안한 시스템과 기존 시스템의 동기 오차 측정 결과를 비교하였다. 시뮬레이션 결과를 통해서 부분 대역 재밍 환경에서 제안 구조가 기존 구조보다 정확하게 동기오차를 예측하는 것을 확인할 수 있었으며, 이러한 경향은 $E_b/N_j$와 재밍점유대역비(rho)가 낮을수록 더욱 뚜렷하였다.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.905-910
• /
• 2008

Vibration analysis is widely used in machinery diagnosis and the wavelet transform has also been implemented in many applications in the condition monitoring of machinery. In contrast to previous applications, this paper examines whether acoustic signal can be used effectively along vibration signal to detect the various local fault, in local fault of gearboxes using the wavelet transform. Moreover, envelop analysis is well known as useful tool for the detection of rolling element bearing fault. In this paper, a acoustic emission (AE) sensor is employed to detect gearbox damage by installing them around bearing housing at driven-end side. Signal processing is conducted by wavelet transform and enveloping to detect her fault all at once gearbox using AE signal.

• 한국전자파학회논문지
• /
• 제19권9호
• /
• pp.1045-1050
• /
• 2008

본 논문에서는 IR-UWB 통신에 적합한 저 전력, 저복잡도의 CMOS RF 수신기를 제작하였다. 제안된 IR-UWB 수신기는 비교적 구조가 간단한 non-coherent demodulation 방식으로 설계, 제작되었다. 설계된 IR-UWB 수신기는 LNA, envelop detector, VGA, comparator로 구성되어 있으며, envelop detector, VGA, comparator는 $0.18{\mu}m$ CMOS 공정 기술을 이용하여 단일 칩으로 설계, 제작하였다. 측정 결과 data rate이 1 Mbps일 때 sensitivity가 -70 dBm이며, 이때 BER은 $10^{-3}$의 값을 가진다. 외부의 LNA를 제외한 단일 칩 CMOS IR-UWB 수신기의 전류 소모는 전압이 1.8 V일 때 5 mA이다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.672-678
• /
• 2009

Acoustic Emission (AE) technique is a non-destructive testing method and widely used for the early detection of faults in rotating machines in these days, because the sensitivity of AE transducers is higher than normal accelerometers. So it can detect low energy vibration signals. The faults in the rotating machines are generally occurred at bearings and gearboxes which are the principal parts of the machines. It was studied to detect the bearing faults by envelop analysis in several decade years. And the researches showed that AE had a possibility of the application in condition monitoring system(CMS) using the envelope analysis for the rolling bearing. And peak ratio (PR) was developed for expression of the bearing condition in condition monitoring system using AE. Noise level is needed to reduce to take exact PR value because the PR is calculated from total root mean square (RMS) and the harmonics peak levels of the defect frequencies of the bearing. Therefore, in this paper, the discrete wavelet transform (DWT) was added in the envelope analysis to reduce the noise level in the AE signals. And then, the PR was calculated and compared with general envelope analysis result and the result of envelope analysis added the DWT. In the experiment result about inner fault of bearing, defect frequency was difficult to find about only envelop analysis. But it's easy to find defect frequency after wavelet transform. Therefore, Envelop analysis added wavelet transform was useful method for early detection of default in signal process.

• 한국통신학회논문지
• /
• 제34권11A호
• /
• pp.909-917
• /
• 2009

본 논문에서는 시분할이중화(TDD) 방식을 이용하는 무선통신 분야에서 부분적인 음영지역을 해소하기 위한 RF 중계기의 TDD 신호를 효율적으로 발생시킬 수 있는 방법과 디지털 방식의 회로를 제안하고 구현하였다. 송신 혹은 수신되는 RF 신호로부터 TDD 동기신호를 검출한 후에 이를 다시 RF 중계기에 입력하며 중계기가 정상적으로 동작할 수 있도록 한다. 하향신호의 포락선을 검파한 후 이를 증폭하고, 무선채널환경에 의해서 왜곡된 신호를 디지털 필터링 방식을 이용하여 복원한 후 동기를 획득하는 방식을 제안하였다. TDD 동기신호를 획득하는 알고리즘을 제안하는데 있어서 가능하면 단순하고 비용이 적게 소요되면서도 강력한 알고리즘을 개발하는데 주안점을 두었다. 제안한 방식은 FPGA를 기반으로 하는 RP와 디지털의 통합형 시스템으로 구현되었고, 실제 WiBro 서비스 환경과 동일한 조건하에서 실험하여 동작을 검증하였다.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.139-149
• /
• 2011

This study focuses on design tendencies in office buildings of public institutions after tightening up Korea's building energy performance criteria. Important office design criteria and recommendations pay attention to the issues such as building orientation, greening buildings, building form, space and envelop by intensifying building energy performance related laws, government guidelines and evaluation systems. The design tendencies explored in this research are as follows. Office buildings mainly face south and have various types of indoor and roof green spaces not for ecological reasons but for the rest. Building depth becomes thinner and atria are inserted into office buildings to improve daylighting and natural ventilation. Building cores are located on north or west and east sides acting as buffer spaces to reduce heat loss and to block solar radiation. Office building envelop design includes various creative ideas to control or utilize solar energy as like three dimensional or double structured skin and window size variation to cope with the intensity of solar radiation. Further, solar energy generation systems are integrated with building component such as roofs, sun screens and windows. This study demonstrates that government's reinforcement of the building energy performance criteria drives the change in design methods and approach.