• 한국항공우주학회지
• /
• 제49권7호
• /
• pp.573-580
• /
• 2021

파라핀 왁스는 높은 후퇴율 때문에 하이브리드 로켓의 연료로 많은 각광을 받고 있다. 하지만 파라핀 연료의 연소에서도 비정상적인 저주파수 연소압력 진동이 관찰되고 있는데, 이는 연료 표면에 형성된 액체층과 액적의 유입과 관련이 있는 것으로 추론된다. 본 연구는 액적에 의한 추가적 연소와 저주파수 연소불안정 발생과의 관계를 분석하였다. 한편, 액적의 발생은 관성력과 액체의 표면장력의 비로 정의되는 We수(Weber Number)와 액체층의 Re수(Reynolds Number)에 따라 변화하는 것으로 알려져 있다. 따라서 일차적으로 실험실 규모의 로켓을 사용하여 We수에 따른 연소불안정의 발생여부를 관찰하였다. We수의 조절은 산화제 유량 변화를 통한 관성력의 변화와 LDPE(Low Density Polyethylene) 첨가에 의한 표면장력의 변화를 통해 시도하였다. 저주파수의 연소불안정의 발생은 특정한 We수 이상에서만 관찰되었고 임계 We수가 존재하는 것을 확인하였다.

• 대한토목학회논문집
• /
• 제26권3A호
• /
• pp.547-553
• /
• 2006

안료가 칼라콘크리트의 성질에 미치는 영향을 알아보기 위해 산화철이 주성분인 적색, 황색 및 흑색 안료와 동 프탈로시아닌을 착색성분으로 하는 청색과 녹색 안료 5종류를 사용하여 모르타르와 콘크리트 실험을 실시하였다. 안료의 종류 및 첨가율에 따라 모르타르 및 콘크리트의 품질특성이 차이가 있었다. 적색, 황색 및 흑색 안료를 첨가한 콘크리트의 응결시간은 다소 빨라지고 압축강도는 약간 증가하는 경향이었으며, 슬럼프 및 공기량은 거의 같거나 감소하였다. 반면, 청색 및 녹색 안료를 첨가한 경우 계면활성제의 공기연행에 의해 콘크리트의 압축강도가 크게 저하하였으며, 슬럼프 및 공기량은 크게 증가하였다. 이들 청색 및 녹색 안료를 첨가한 콘크리트에 소포제를 첨가함으로써 콘크리트의 압축강도가 크게 개선되어 안료를 첨가하지 않은 콘크리트와 비슷한 강도발현이 나타났다.

• 설비공학논문집
• /
• 제28권11호
• /
• pp.434-443
• /
• 2016

The evaporation of water from an aqueous solution is widely used in the food, desalination, pulp, and chemical industries. Usually, a large amount of energy is consumed in the evaporation process to boil off water due to atmospheric pressure. As a way of improving the energy efficiency of the evaporation process, the combination of multiple effect evaporation and thermal vapor recompression has been proposed and has become a successful technique. In this study, 4 multiple-effect falling film type evaporators for sugar solution are designed and the energy efficiency of the system is analyzed in response to the selection of the steam ejector position. Energy efficiency is increased and vapor is more compressed in the steam ejector as the Thermal Vapor Recompression (TVR) is arranged in the rear part of the evaporator system. A simplified 0-dimensional evaporator model is developed using non-linear equations derived from mass balances, energy balances, and heat transfer equations. Steam economy is calculated to compare the evaporation performance of the 4 proposed evaporators. The entrainment ratio, compression ratio, and expansion ratio are computed to check the ejector performance.

• Computers and Concrete
• /
• 제20권2호
• /
• pp.165-176
• /
• 2017

Textile Reinforced Cementitious Composite (TRCC) became the most common construction material lately and have excellent properties. TRCC can be employed in the manufacture of thin-walled facade elements, load-bearing integrated formwork, tunnel linings or in the strengthening of existing structures. These composite materials are a combination of matrix and textile materials. There isn't much research done about the usage of polymer modified matrices in textile reinforced cementitious composites. In this study, matrix materials named as fine grained concretes ($d_{max}{\leq}1.0mm$) were investigated. Air entraining effect of polymer modifiers were analyzed and air void content of fine grained concretes were identified with different methods. Aim of this research is to study the effect of polymer modification on the air content of fine grained concretes and the role of defoamer in controlling it. Polymer modifiers caused excessive air entrainment in all mixtures and defoamer material successfully lowered down the air content in all mixtures. Latex polymer modified mixtures had higher air content than redispersible powder modified ones. Air void analysis test was performed on selected mixtures. Air void parameters were compared with the values taken from air content meter. Close results were obtained with tests and air void analysis test found to be useful and applicable to fine grained concretes. Air void content in polymer modified matrix material used in TRCC found significant because of affecting mechanical and permeability parameters directly.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제24회 KOSCO SYMPOSIUM 논문집
• /
• pp.68-75
• /
• 2002

The dynamic behaviors of the single vortex and flame-vortex interaction in a $CH_4/Air$ diffusion flame with addition of $CO_2$ were investigated numerically. The numerical method was based on a predictor-corrector for low Mach number flow. A two-step global reaction mechanism was adopted as a combustion model. Through comparison of results by effect of $CO_2$ added either on the fuel or oxidizer side, it was found that the growth of single vortex and entrainment of surrounding fluid by $CO_2$addition on the fuel side are larger than those by $CO_2$ addition on oxidizer side. Also, when $CO_2$ is added on fuel side, flame-vortex interaction becomes more significant than on air side.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.305-313
• /
• 2005

Measurements of flame length, width and NOx emissions have been conducted to investigate the effect of an acoustic excitation on flame structure in turbulent hydrogen diffusion flames with coaxial air. The resonance frequency of oscillations was varied between 259 ,514 and 728 Hz with power rate of 0.405 and 2.88w. When these frequencies imposed to hydrogen flames, dramatic reduction of flame length and NOx emission was achieved. And acetone planar laser-induced fluorescence technique was used to measure a concentration of the near field of driven axisymmetric jet. The air-fuel stoichiometric line was plotted to investigate the mixing layer and development of air entrainment to fuel jet. Consequently, acoustic excitation on flame could enhance the air-fuel mixing resulting in abatement of NOx emission quantitatively.

• 한국연소학회지
• /
• 제7권1호
• /
• pp.44-51
• /
• 2002

This paper presents an atomization model for sprays under flash boiling conditions. The atomization is represented by the secondary breakup of a bubble/droplet system, and the breakup is considered as the results of two competing mechanisms, aerodynamic force and bubble growth. The model was applied to predict the atomization of a hollow-cone spray from pintle injector under flash boiling conditions. In the regimes this study considered, sprays are atomized by bubble growth, which produces smaller SMD#s than aerodynamic forces alone. With decreasing ambient pressures, the spray thickness, fuel vaporization rate and vapor radial penetration increases, and the drop size decreases. With increasing the fuel and ambient temperatures to some extent, the effect of flash boiling and air entrainment completely change the spray pattern.

• 한국자동차공학회논문집
• /
• 제2권4호
• /
• pp.1-8
• /
• 1994

이 논문에서 우리는 발전하는 전단층의 2차원 Wave Mode에 대한 비선형 상호작용에 대한 문제를 다루었다. 총 위상각은 Wave Mode ij와 k$\ell$의 상응하는 에너지와 위상 상호작용을 조절한다. 그러므로 이 논문의 목적은 전단층에서 Lange-Scale 구조의 초기 위상각의 효과를 조사하고자 하는 것이다. 이 연구에서 우리는 Subharmonic의 존재는 전단층의 성장에 상당한 영향을 준다는 것을 알았고 Entrainment에서도 증가하는데 영향을 준다는 것을 알았다. 우리는 또한 Mean Flaw와 Fundamental의 다른 초기 위상각의 효과는 Subharmonic이 성장하는 먼 Downstream 영역에서 보여지기 시작한다는 것을 알았다.

• 한국전문물리치료학회지
• /
• 제5권3호
• /
• pp.56-62
• /
• 1998

The nature of entrainment between the locomotor and the respiratory rhythm was investigated while normal human subjects were walked or running on a treadmill. The purpose of this study was to analyze the incidence and type of coordination between the locomotor and the respiratory rhythm during running at different work load. The experiments were carried out on 12 untrained volunteers exercising at 3 work loads (2 METs, 3 METs, 4 METs in randomized order). The gait cycle was measured by electromyography (EMG) signal of gastrocnemius firing and the respiratory cycle was measured by a thermometer. We found that the ratio between the locomotor and the respiratory rhythm existed and 2:1 ratio between the locomotor-respiratory coupling was dominant at 2 METs and 3 METs.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.43-48
• /
• 2004

A screw-type centrifugal pump was manufactured to carry solids primarily and its impeller has a wide flow passage. However, the effect of flow passage shape on delay of the choke due to entrained air has not been clarified yet. Moreover, because its impeller has a particular shape, only few studies have tried to clarify the pump performance and details of internal flow pattern of that pump. For that reason, we carried out the pump performance experiment under air-water two-phase flow condition with different impeller tip clearances, pump rotational speeds and void fractions by using a small screw-type centrifugal pump designed to acquire basic data. In a general centrifugal pump, it was reported that loss of pump head from single-phase flow to the choke due to air entrainment new the best efficiency point was large. However, the loss near the best efficient point in a screw-type centrifugal pump became less than that in a general centrifugal pump.