• 제목/요약/키워드: Entering Time

검색결과 474건 처리시간 0.027초

Effects on the Lumbar & Quadriceps Muscle Activities when Getting in and Out of RV · and Passenger Cars

  • Kim, Seong-Su;Lee, Hyoung-Soo
    • 대한인간공학회지
    • /
    • 제30권5호
    • /
    • pp.581-588
    • /
    • 2011
  • Objective: The objective of this study is to compare muscle activity levels of the lumbar and rectus femoris muscle when entering and exiting RV and passenger vehicles. Background: Three varieties of RVs and two varieties of passenger vehicles were selected for this study. Method: Twenty individual(10 male and 10 female) in their twenties and thirties with no chronic back pain or any other illness participated in this study. Participants performed entering and exiting the three models of RVs and two models of passenger cars. Appropriate rest time was given to participants between entering and exiting each vehicle in order to recover from muscle fatigue while performing their tasks. Results: Results from this study show that muscle activity levels were highest for entering RVs and exiting passenger vehicles. There were no significant differences in muscle activity levels for left and right side muscles in regards to entering and exiting vehicles. Application: These results can be used to provide baseline information for reduce muscle fatigue when getting in and out of vehicles.

AGV 투입간격을 고려한 Flow Shop형 FMS의 최적작업순서 결정 (Determination of the Optimal Job Sequence on the Flow-Shop Type FMS Considering the AGVs' Entering Interval)

  • 정병희;양대용
    • 한국경영과학회지
    • /
    • 제17권3호
    • /
    • pp.47-57
    • /
    • 1992
  • The purpose of this paper is to improve the operation performance of unit-load Automated Guided Vehicles (AGV's) used as a carrier and mobile workstation in a flow-shop type flexible manufacturing system. An algorithm is developed to determine the optimal job sequence which minimizes the vehicle idle time on the line and the production makespan by the use of the entering interval and travel time between workcenters. An entering times of AGV's and the minimum number of AGV's required are calculated by optimal job sequence. When the numbe rof AGV's is limited, enterling times of AGV's are adjusted to maximize the efficient use of vehicles. A numerical example is given to illustrate the application of the algorithm.

  • PDF

다중 동적구간 대기행렬을 이용한 최단경로탐색 알고리즘 (Shortest Path-Finding Algorithm using Multiple Dynamic-Range Queue(MDRQ))

  • 김태진;한민홍
    • 정보처리학회논문지A
    • /
    • 제8A권2호
    • /
    • pp.179-188
    • /
    • 2001
  • We analyze the property of candidate node set in the network graph, and propose an algorithm to decrease shortest path-finding computation time by using multiple dynamic-range queue(MDRQ) structure. This MDRQ structure is newly created for effective management of the candidate node set. The MDRQ algorithm is the shortest path-finding algorithm that varies range and size of queue to be used in managing candidate node set, in considering the properties that distribution of candidate node set is constant and size of candidate node set rapidly change. This algorithm belongs to label-correcting algorithm class. Nevertheless, because re-entering of candidate node can be decreased, the shortest path-finding computation time is noticeably decreased. Through the experiment, the MDRQ algorithm is same or superior to the other label-correcting algorithms in the graph which re-entering of candidate node didn’t frequently happened. Moreover the MDRQ algorithm is superior to the other label-correcting algorithms and is about 20 percent superior to the other label-setting algorithms in the graph which re-entering of candidate node frequently happened.

  • PDF

유연가공 및 조립시스템에서의 AGV 운용전략 (A strategic operating model of AGVs in a flexible machining and assembly system)

  • 양대용;정병희;윤창원
    • 경영과학
    • /
    • 제11권1호
    • /
    • pp.23-37
    • /
    • 1994
  • This paper discusses the methodology for the operational performance of unit-load automated guided vehicles(AGVs) in a flow-shop-type flexible machining and assembly systems (FM/AS). Throughout the paper, AGVs are working as a carrier and mobile workstation. For a double-loop FM/AS, in which one loop is dedicated to machining and the other to assembly, three AGV operating strategies are proposed. Considering the entering interval and travel time of AGVs between workcenters, the strategies are developed to determine the best job sequence which minimizes the makespan and vehicle idle time. Entering times of AGVs and the required minimum number of AGVs are obtained on the basis of the best job sequence. When the number of AGVs are limited, entering times of AGVs are adjusted to maximize the utilization of AGVs.

  • PDF

화생방 방호시설의 행동 절차 분석을 통한 진입 소요시간 예측 시뮬레이션 (Chemical/Biological/Radiological Protective Facility Entering Time Estimation Simulation with Procedure Analysis)

  • 박선호;이현수;박문서;김수영
    • 한국건설관리학회논문집
    • /
    • 제15권5호
    • /
    • pp.40-48
    • /
    • 2014
  • 최근 화생방 공격에 대한 위협이 증가함에 따라 화생방 방호시설의 중요성이 강조되고 있다. 화생방전 발생 시 화생방 방호시설 외부에 있는 작전인원은 화생방 방호시설 내 오염통제구역 및 무해구역에서 제독과정을 거쳐 방호시설 내부로 진입하게 된다. 이 과정에서 부족한 설비 등으로 인해 특정 절차 및 구역에서 병목현상이 발생할 경우 작전인원은 제시간에 방호시설 내로 진입 할 수 없게 되며, 이는 전시 작전 수행의 효율성 저하뿐만 아니라 큰 인명피해로도 이어지게 된다. 현재의 화생방 방호시설 설계기준은 공조시스템 등 특정 설비에 국한되어 있으며, 실제 화생방전 발생 시 실제 진입 소요시간을 고려한 설계기준은 부재한 실정이다. 본 연구에서는 화생방 방호시설 진입 소요시간에 크게 영향을 미치는 요소를 시뮬레이션에 반영하여 화생방 방호시설 진입 소요시간을 예측하는 시뮬레이션 모델을 개발하였다. 이를 위해 오염통제구역 및 무해구역에서 이루어지는 행동절차를 세분화하고, 각 행동절차에 소요되는 실제 시간을 측정하여 이를 시뮬레이션에 적용하였다. 또한 진입 소요시간에 영향을 미치는 요인들을 선정하여 이들의 조절을 통해 대안을 작성하고 각 대안별 진입 소요시간 및 전체결과에 미치는 영향을 분석하였다. 이 모델은 향후 화생방 방호시설 진입 시뮬레이터의 모듈로써 활용될 수 있으며 방호시설 설계 및 운용자의 의사결정 기초자료로 활용될 수 있다.

검색 트래픽 정보를 활용한 고속도로 교통지표 분석 연구 (Analysis of Highway Traffic Indices Using Internet Search Data)

  • 류인곤;이재영;박경철;최기주;황준문
    • 대한교통학회지
    • /
    • 제33권1호
    • /
    • pp.14-28
    • /
    • 2015
  • 2000년대 중반부터 인터넷 검색 트래픽을 활용한 다양한 연구가 진행되었다. 대표적으로 구글은 미국의 독감 발병 상황을 인터넷 유저의 검색 패턴을 통해 예측하는 서비스를 만들기도 하였다. 교통지표 역시 인터넷 검색 패턴과 유사할 수 있다는 가설을 확인하기 위하여, 검색 트래픽 데이터를 활용하여 고속도로의 진입 교통량과 구간 속도를 추정하는 모형을 구축하고 적합도 등을 확인하는 것이 본 연구의 목적이다. 그 결과, 첫째, 출퇴근의 상시적 통행이 이루어지는 지점의 TCS 진입 교통량 모형은 구글 검색 트래픽이 입력변수로 우수하였고, 검색 트래픽과는 음의 상관관계를 보였다. 둘째, 여가 통행이 집중적으로 나타났던 지점의 TCS 진입 교통량 모형은 네이버의 검색 트래픽이 입력변수로 선정되었으며, 검색 트래픽과는 양의 상관관계가 나타났다. 셋째, VDS 속도의 경우 시계열 도표상 검색 트래픽과 음의 상관관계를 보였다. 넷째, 검색 트래픽을 입력변수로 활용한 전이함수 잡음 시계열 모형은 그렇지 않은 시계열 모형에 비해 비교적 적합도가 우수하다는 결과를 도출하였다. 다만, VDS 속도 모형의 경우 다수의 입력변수가 포함되고 모형 계수의 부호가 상이함에 따른 한계가 존재하였다. 향후 검색 트래픽의 출처나 검색어, 혹은 시차 및 집계 단위에 대한 추가적 연구가 진행된다면, 교통 분야의 빅 데이터 연구시 활용 폭이 넓어질 것으로 판단된다.

잔골재의 투입시점에 따른 알칼리 활성화 슬래그 모르타르의 강도와 건조수축에 대한 기초적 연구 (The Fundamental Study of Strength and Drying Shrinkage on Alkali-activated Slag Cement Mortar with Different Entering Point of Fine Aggregate)

  • 김태완;엄장섭;서기영;박현재
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제18권2호
    • /
    • pp.117-125
    • /
    • 2014
  • 본 연구는 수산화나트륨(NaOH)으로 활성화된 알칼리 활성화 슬래그 시멘트(alkali-activated slag cement; AASC)의 기초 특성에 관한 실험에 관한 연구이다. 물-결합재 비(W/B)를 0.4와 0.5로 하였다. 그리고 활성화제의 농도를 2M과 4M을 사용하였다. 각 W/B 비에 대해 5가지의 배합을 고려하였다. N0는 KS L 5109의 방법이고 N1~N4는 배합시간, 배합 단계 그리고 잔골재의 투입시점을 다르게 변화시켰다. 시험결과 AASC의 플로우 값, 강도 그리고 건조수축은 잔골재의 투입시점에 영향을 받았다. 플로우 값은 잔골재의 투입시점이 늦춰짐에 따라 감소하는 경향을 나타내었다. 압축강도와 휨강도는 투입시점이 늦어짐에 따라 증가하였다. 더구나 XRD 분석은 이러한 결과들을 뒷받침하고 있었다. 건조수축은 잔골재의 투입시점이 늦어지면 증가하였다. 본 연구에 고려된 실험요인들을 통해 배합을 조절한다면 AASC의 특성을 향상시킬 수 있을 것이다.

부산 북항에서 VTS 시스템에 의한 출입항 선박의 접이안 작업과정의 실시간 모니터링 (Real-time monitoring of berthing/deberthing operations process for entering/leaving vessels using VTS system in Busan northern harbor, Korea)

  • 이대재
    • 수산해양기술연구
    • /
    • 제45권3호
    • /
    • pp.165-176
    • /
    • 2009
  • The process of berthing/deberthing operations for entering/leaving vessels in Busan northern harbor was analyzed and evaluated by using an integrated VTS(vessel traffic service) system installed in the ship training center of Pukyong National University, Busan, Korea. The integrated VTS system used in this study was consisted of ARPA radar, ECDIS(electronic chart display and information system), backup(recording) system, CCTV(closed-circuit television) camera system, gyro-compass, differential GPS receiver, anemometer, AIS(automatic identification system), VHF(very high frequency) communication system, etc. The network of these systems was designed to communicate with each other automatically and to exchange the critical information about the course, speed, position and intended routes of other traffic vessels in the navigational channel and Busan northern harbor. To evaluate quantitatively the overall dynamic situation such as maneuvering motions for target vessel and its tugboats while in transit to and from the berth structure inside a harbor, all traffic information in Busan northern harbor was automatically acquired, displayed, evaluated and recorded. The results obtained in this study suggest that the real-time tracking information of traffic vessels acquired by using an integrated VTS system can be used as a useful reference data in evaluating and analyzing exactly the dynamic situation such as the collision between ship and berth structure, in the process of berthing/deberthing operations for entering/leaving vessels in the confined waters and harbor.

남명(南冥)의 인물평(人物評)을 통해 본 출처관(出處觀)의 기저(基底) (The Basic of Viewpoint of Enter the Government Service and Live in Seclusion from Nam-myoung's a Personal Criticism)

  • 김경수
    • 한국철학논집
    • /
    • 제25호
    • /
    • pp.137-166
    • /
    • 2009
  • 남명에 대한 기존의 연구는 남명학의 특징을 경의(敬義)사상의 실천유학에 초점을 맞추어 왔다. 그러나 엄밀한 의미에서 역사적 인물로서의 남명을, 그의 당대에서나 그의 사후 오늘에 이르기까지, 가장 남명답게 규정짓는 요소는 무엇인가? 경과 의로 정립된 그의 철학인가? 이 점에 있어 필자는 다소 다른 견해를 가지고 있다. 당대나 후세에 남명을 평가한 모든 글들에서는 한결같이 출처(出處)에 있어 처사(處士)로서의 지조를 끝까지 지킨 남명의 출처사상을 가장 높게 평가하고 있음을 알 수 있다. 본고는 그의 출처관을 그 자신의 인물평(人物評)을 통하여 살펴보고, 나아가 그러한 인물평의 저변에 깔려 있는 출처사상의 바탕을 찾아보고자 하였다. 그는 역사적 인물들과 당대의 인물들에 대한 비판적 검토를 통해서 그들의 출처를 논하였다. 남명은 그 출처가 합당한가 아닌가에 대한 기준으로서 기미를 파악하는 선견지명을 꼽았는데, 이때의 '기(幾)'는 바로 선과 악으로 나뉘는 분기점인 것이다. 기미의 순간에 인욕을 배제하고 천리를 잘 보존하게 된다면 바로 길인(吉人)이 되고, 인욕이 천리에 포함되게 되면 바로 악인(惡人)이 되는 것으로 파악한 것이다. 벼슬길에 나아감에 있어서도 일을 '할 수 없는 시기'에 나아가는 것이나, '할 수 없는 일'을 하려고 하는 것은 모두 인욕이 개입된 것으로 보았으니, 곧 그 출처가 잘못된 것이라는 관점이다.

제주도 연안 정치망 조업시스템 개발에 관한 연구 - I. 모형어구에 의한 각망과 낙망의 어획성능 비교 - (Studies on the Development of the Fishing System of Set Net in the Coast of Jeju Island - I. Comparative of Fishing Efficiency of Rectangular Set Net and Pound Net by the Model Net -)

  • 김종범;김석종
    • 수산해양기술연구
    • /
    • 제37권3호
    • /
    • pp.223-231
    • /
    • 2001
  • 제주도 연안 정치망의 어획성능을 향상시키기 위한 어구구조개량과 조업방식의 생력화에 대한 기초자료를 제공할 목적으로 현재 제주도 연안 정치망 어장에 부설하여 조업을 행하고 있는 각망어구와 낙망어구의 어획성능을 비교하기 위해서 이들 실물어구를 1/30로 축소하고 제작한 모형어구를 이용하여 수조실험을 실시하고 고등어어군, 전갱이 어군, 독가시치 어군의 입·출망 행동을 관찰하고 해석하였는데, 그 결과는 다음과 같다. 1. 어군의 입망율은 경과시간 60초일 때 각망어구에서는 고등어 50%, 전갱이 18%, 독가시치 28%였고, 낙망 어구에서는 고등어 70%, 전갱이 60%, 독가시치 30%였다. 2. 어군의 출망율은 경과시간 60초일 때 각망어구에서는 고등어 70%, 전갱이 40%, 독가시치 24%였고, 낙망어구에서는 고등어, 전갱이가 각각 0%, 독가시치가 3%였다. 3. 어군의 잔존율은 경과시간 60초일 때 각망어구 에서는 고등어 30%, 전갱이 60%, 독가시치 76%였고, 낙망어구에서는 고등어, 전갱이가 각각 100%, 독가시치가 97%였다.

  • PDF