• Journal of Physiology & Pathology in Korean Medicine
• /
• v.32 no.2
• /
• pp.134-140
• /
• 2018

This study aims to evaluate healthcare providers' satisfaction and demands pertaining to the collaborative first-stage pilot project between Korean medicine and Western medicine. This survey was conducted via electronic mail among 33 healthcare providers participating in the pilot project. Likert type 5-point scale or Likert type 7-point scale was used to evaluate each item. The response of '${\geq}4$' on the 5-point scale, and '${\geq}5$' on the 7-point scale were analyzed as positive answers. A total of 27 healthcare providers (81.8%) responded, of which 9 were western medical doctors (33.3%) and 18 were Korean medical doctors (66.7%). In respect to satisfaction of the pilot project, 88.9% gave positive responses on improved patients' convenience, 59.3% on treatment efficiency and 55.6% on diagnosis efficiency. In terms of self-evaluation on the pilot project, 70.4% gave positive answers on changes in quality of collaborative treatment, 74.1% on cooperation of results, 63.0% on cooperation of structure and 51.9% on cooperation of process. In terms of demand for collaborative treatment or the pilot project, 'standardized manual' and 'simplification of administrative procedures' showed highest demand, resulting up to 88.9%, followed by 85.2% demanding more public relations and 63.9% demanding enlargement of participating hospitals. This survey revealed that healthcare providers are generally satisfied with patients' convenience and treatment effects. Further studies are needed to develop a standardized manual, simplified administrative procedures, and expanded pilot project contents.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.19-31
• /
• 2021

Micropiles are cast-in-place piles with small diameters. The advantage of micropile is low construction expense and simple procedures, so it is widely applied to existing buildings and structures for the reinforcement of foundation and seismic performances. The base expansion structure has been developed following the original mechanism of horizontal expansion steps under compressive loading. This kind of structure can be installed at the pile end to improve the bearing capacity by tip area enlargement and horizontal force increment to the pile surface area. However, 'Micropile with base expansion structure' cannot be put into practical use, because detailed verification for the developed technique has not been conducted so far. In this research, 3-D numerical analysis was conducted to figure out the bearing mechanism of base expansion micropile and to verify the bearing capacity improvement compared to the general micropiles. 3-D modelling of micropile with base expansion structure was carried out and input parameter was determined. Bearing mechanism induced by base expansion structure was analyzed by lab-scale modelling, and bearing capacity improvement was verified by field-scale analysis.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.05a
• /
• pp.121-122
• /
• 2023

As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10^th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2023.11a
• /
• pp.72-73
• /
• 2023

As containerized maritime transport began in earnest, the size of container ships has steadily increased, and recently, the operation of 24,000 TEU-class vessels has become regular. However, concerns about the efficiency and productivity of such mega container ships from a port operational perspective have continued to be raised. The 10th Busan International Port Conference requested an in-depth study on the trends of container ship enlargement by analyzing the order status of ultra-large container ships from major global liners. Generally, the factor that drives the upsizing of ships is the realization of economies of scale that lowers transportation costs per TEU, which leads to a higher level of cost reduction per unit transportation compared to the increase in fuel consumption due to transporting large amounts of cargo with a single ship. However, it is necessary to examine whether this trend of container vessel enlargement is feasible for port operations. To this end, this study compares and analyzes the productivity and efficeiency of different ship sizes to evaluate the effect of ship size on port operations.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.1
• /
• pp.36-43
• /
• 2008

This purpose of this study was to examine the effect of planting density, growing medium and strength of a nutrient solution (National Horticultural Research Institute's nutrient solution: HRI's) on the growth and development of Oriental hybrid lily 'Le Reve' in a box cultivation. The planting density with 14, 18 and 22 bulbs had sprouting one day earlier than other treatments. Planting density of 22 bulbs flowered first, while six bulbs flowered the last, indicating that higher planting densities led earlier flowering. The increasing planting density increased stem length of cut flowers. On the other hand, cut flower quality was improved when the planting density was lower. The incidence of physiological disorders such as blasting was more frequent in planting density of 22, 18, and 14, indicating that higher planting densities caused higher incidences of physiological disorders. All planting densities except 22 bulbs displayed superior results in width, weight, number, and scale weight of the bulbs. Greater planting densities led to inferior bulb enlargement and an increased decomposition rate. pH decreased in all treatments after the bulb enlargement and decreased more as the planting density increased. Contents of P, K, Ca, and Mg increased, while contents of K and Ca decreased, as the planting density increased. The rice hull+coir (1:1, v/v) treatment was better than others, but did not show that much of a difference. Moreover, in bulbs enlargement after cut flower harvest, lily medium and perlite+peat moss treatments showed superior results, and decomposition rate was the greatest in the rice hull+coir (1:1, v/v) treatment. In the HRI's solution strength treatment from the period of flower bud emergence to flower harvest, higher solution strengths gave better cut flower quality in terns of length, weight, and number of flowers. The non-treated control and one third strength of a HRI's solution hastened flowering, indicating that lower strengths led to earlier flowering. According to the results of leaf analysis as affected by solution strength during the flower harvest, absorption rates of N and K were greater when the strength was higher, and Ca and Mg showed the same tendency. On the other hand, the absorption rate of P was the lowest in all treatments.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.6 no.1
• /
• pp.92-102
• /
• 2000

Social trends influence the need for inclusion of basic concepts of occupational health into generic nursing education. Several techniques have been used to incorporate occupational health into baccalaureate programme. These include clinical preceptorships in employee health services, lectures on occupational health issues into community health nursing courses and the integration of occupational health concepts throughout the nursing curriculum and organize an independent course of occupational health nursing for two semester hours. The purpose of this study was to examine the impact of this course to the role orientation of nursing students. In March 1998, pre-test was conducted with all 39 students. Post- test for the subjects and the survey for the other comparison group were conducted after the course in May. Structured questionnaires were distributed which were composed of 42 items related to the role of occupational health nurse and each item was measured on a scale of 1 to 5. Results are as follows: 1) The paired t-test supported the hypothesis that role orientation of students was improved through the occupational health nursing course (t=-3.93, p=.000), 2) As the result of t-test between the subject and the comparison group, the mean score of the role orientation in the case of subject was significantly higher than that of the comparison group(t=13.3449, p=.0005). The enlargement of occupational health nursing course must be a facilitating factor to the improvement of the role orientation of baccalaureate students. It is needed to measure occupational health nursing competence of them in the future.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.23-23
• /
• 2022

Recently, soybean production and market price are unstable, even if demand of soybean is maintained. Diverse conditions such as climate change, a decrease in rural population, and consuming affect food industry. In this situation, food security is soaring as important key-word again, and MAFRA is promoting policies for improving soybean self-sufficiency with the goal of 40% until 2030. The point of policy is to extend a production and stabilize a demand for soybean with supporting large-scale soybean paddy-field complex. According to the background, soybean breeding and production research in NICS are proceeded with three parts. First, production improvement with soybean cultivation land enlargement and high-yield cultivar development. Various growth period soybean cultivars for double cropping, irrigation management technologies in paddy field, and hyper-yield and specific-region adaptable cultivar development. Second, reduction of production expense with mechanized cultivation and digital-based field management technologies. Third, consumer-friendly and high quality soybeans with high protein cultivar for alternative protein usage and high food process-ability for soy milk, tofu, soybean sprouts, and grain usage. Each part need to be combined and advanced to improve soybean industry and soybean self-sufficiency.

• Korean Institute of Interior Design Journal
• /
• no.6
• /
• pp.45-52
• /
• 1995

The presentation of the method by which the furniture and the architecture can be unified in one category, and the study and the verification on the mutual relation in the shape and the function are having been consistently made till the late twenties. The change of the social structure such as increasing the unit dwelling space with the small scale comes to need the efficiency in using space and the open dwelling space by the systematic spa-cial formation. Therefore, the understanding of the mean-ing and the characteristics of system furnitures as the design method which can meet such needs will be made here in this study. The application of the systematic consideration as the method of interior design means the formation of the firm image on the spacial environment through the mix-ture and link of the heterogeneous factors, the organic connection of each surface, the establishment of the natu-ral relation by linking the heterogeneous materials mutu-ally. and the easiness of the entire plan in the end. This study aims at analyzing and studying the typical charac-teristics by understanding the historical background and methodical principle which enabled the appearance of this kind of thought, and the adapted cases of the wood and metal material system furniture. There may be difference between the structural sub-stance and formative consideration. Transformative furni-ture which consists of the factors is the concept for the encrease of the multi purpose value by mixing the unit cabinets. One system can be separated horizontally, verti-cally, and to the drawers, and it gives us the disengage-ment from the artificial environment, since all the heights and width can be transformed as per each situa-tion of the space. The factors which can not be found in the other existing furniture are as follows. 1. disengagement from the artificial environment. 2. establishing the new productiosn trend as freed from the customers' fashion trend. 3. presenting the producing condition which leads the exact technology. 4. flexibility of the furniture which enables the reduction and enlargement in each situation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.1
• /
• pp.139-145
• /
• 1993

Biogas created from animal waste is a precious energy source. A practical and successful utilization of the biogas is not easy, because there lie some difficulties in biogas production and facilities investment. In this study, the requisites for a successful biogas utilization were discussed. The production results obtained in the previous operation of anaerobic digestion plant were used for the simulation. When the slurry heating was designed for constant biogas generation, depreciation costs of the facilities amounted 1,175,000 yen per year, and biogas productions at $24.5^{\circ}C$, $30.0^{\circ}C$ and $35.5^{\circ}C$ were $16.8m^3$, $17.6m^3$ and $25.1m^3$, respectively. Removal ratios of organic matters were not so high. At $35.5^{\circ}C$, energy value of the biogas produced was estimated 125.5 Mcal per day, and the following heat loss (y Mcal/day) was brought about by the temperature difference ($X^{\circ}C$) between the digester and atmosphere; y = 0.769X - 5.375. The costs of biogas production per cow were assumed to decrease according to enlargement of feeding scale, especially on scales of more than 30 cows. On recent levels of costs and prices of energy in Japan, they were nearly equal to 2 to 3 fold of the price of municipal mixed gas when a anaerobic digester was compulsorily heated and kept at $30.0^{\circ}C$ or $35.5^{\circ}C$.

• Journal of Korea Trade
• /
• v.26 no.3
• /
• pp.23-44
• /
• 2022

Purpose - Recent issues such as vessel enlargement, strengthening of environmental regulations, and port smartization are expected to increase costs and intensify competition in the port industry. In the new normal era, when external growth has reached its limit, the efficient operation of ports is becoming indispensable for achieving sustainable growth. This study aims to identify the determinants of inefficiency by examining the cost structure and efficiency of container terminals in Korea and furthermore propose the political implications to derive the maximization of efficiency. Design/methodology - This study estimates the cost function of container terminal operators and identifies the efficiency of container terminals using stochastic cost frontier (SCF) in the first stage. In the second step, the SCF results are compared with the data envelopment analysis (DEA). Last, this paper proposes efficiency determinants on container terminal operation to establish appropriate strategies. Out of the 29 container terminal operators in South Korea, 13 operators participated in the survey. The translog cost function was estimated utilizing a total of 116 observations collected over the 2007-2017 period. Findings - Empirical analysis shows that economies of scale exist in Korea's container ports, which provides a rationale for the government's policy to establish the global terminal operator by integrating small terminal operators to enhance competitiveness. In addition, as a result of the determinants analysis, container throughput, weight of direct employment costs, and labour cost share have positive effects on improving cost efficiency, while inefficiency increases as the length of quay increases. More specifically, cost efficiency improves as the proportion of direct employment costs to outsourcing service costs increases. Originality/value - This study contributes to analyzing the inefficiency factors of container terminals through efficiency analysis with respect to a cost function. In addition, this study proposes the practical and political implications, such as establishing a long-term manpower pool, the application of the hybrid liner terminal system, and the construction of a statistical data system, to improve the cost inefficiency of terminal operators.