• 한국산학기술학회논문지
• /
• 제16권3호
• /
• pp.1684-1691
• /
• 2015

흡수식 냉동기의 고효율화와 소형화를 위해서는 고성능 전열관의 연구가 필수적이다. 하지만 재생기용 전열관에 대한 연구는 많이 미흡한 실정이다. 본 연구에서는 만액식 재생기용 전열관의 성능을 파악하기 위한 기초연구로, 형상이 다른 7종의 전열관에 대해 풀비등 실험을 수행하고 비등열전달계수를 도출하였다. 실험은 압력 7.38~101.3 kPa, 열유속 $20{\sim}40kW/m^2$의 범위에서 수행되었다. 실험결과 모든 전열관에서 압력이 증가하고 열유속이 증가할수록 비등열전달계수 값은 증가하였다. 대기압 조건에서는 notched fin 관과 low fin 관이 높은 비등열전달계수를 나타내었고(열전달계수가 가장 낮은 19.0 mm O.D. 평활관의 225% 와 202%), 압력이 낮아질수록 low fin 관이 다른 전열관에 비해 현저히 높은 비등열전달계수를 나타내었다 (12.34와 7.38 kPa에서 19.0 mm O.D. 평활관의 290%와 288%).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2390-2395
• /
• 2007

The present research was experimentally performed to analyze the effect of delta-wing vortex generators(DWVG) on the heat transfer of fin surface of the plate fin-oval tube. The local heat transfer coefficient of the fin surface for four kinds of DWVG's arrangement was measured by the naphthalene sublimation technique for Reynolds numbers ranging from 2000 to 3200. The results showed that the heat transfer of the plate fin-oval tube can be significantly enhanced by DWVG for relatively low Reynolds numbers.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권3호
• /
• pp.243-251
• /
• 2007

This experiment was conducted to investigate the effect of particles on the heat transfer characteristics of fluids flowing in a cold water tube. Plastic beads with 3 different sizes were used as flowing particles with cold water. An experimental test section was composed of concentric double tubes having diameters of 25mm for the inner tube and 50mm for the outer tube. The materials for the inner and outer tubes are copper and PVC respectively. It was found that the particles enhanced the heat transfer coefficient by random and vortex motion in the fluid. Hence the heat transfer coefficients for the fluid with 2mm, 5mm and $2{\times}6mm$ particles were $7%{\sim}37%$ higher than the fluid without the particles.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.581-588
• /
• 1998

An experimental study of the absorption process of water vapor into Lithium Bromide solution was performed. For the purpose of development of high performance absorption chiller-heater utilizing Lithium Bromide solution as working fluid, the absorber is the most effective to improve the performance of an absorber because it requires the largest heat transfer area in an absorption chiller-heater system. This paper introduces bare tube and floral tube for the absorber of absorption chiller-heaters. floral tube has higher heat and mass transfer performance than bare tube conventionally used in absorbers and the it is expected to perform high heat and mass transfer. This paper will provide important information on the selection of absorber tubes in commercial absorption chiller -heaters.

• 설비공학논문집
• /
• 제10권5호
• /
• pp.589-599
• /
• 1998

Air side heat transfer and pressure drop for fin-tube heat exchanger with wave and wave-slit fins were measured for various fin spacings and number of tube rows. Outer diameter of the tube including fin collar is 10.07mm, and experiments were done with dry surface condition. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively, and wave depth of the wave fin is 2mm. Experiments were conducted for 1, 2 and 3 rows and 3 different fin spacings, 1.3, 1.5 and 1.7mm. An attempt was made to demonstrate advantage of the enhanced fins over the plane fin by introducing the concept of fan power, Effect of the number of tube rows on heat transfer was discussed in connection with general mechanisms of heat transfer enhancement for fin-tube heat exchanger. Also the effect of hydrophilic coating was investigated. Lastly, correlations for Colburn j-factor and friction factor were developed.

• 설비공학논문집
• /
• 제16권6호
• /
• pp.522-529
• /
• 2004

In this study, external condensation heat transfer coefficients (HTCs) of flammable refrigerants of propylene, propane, isobutane, butane, DME, and HFC32 were measured on a horizontal plain tube, 26 fpi low fin tube, and Turbo-C tube. All data were taken at the temperature of 39$^{\circ}C$ with a wall subcooling of 3∼8$^{\circ}C$. Test results showed a typical trend that condensation HTCs of flammable refrigerants decrease with increasing wall subcooling. HFC32 had the highest HTCs among the tested refrigerants showing 44% higher HTCs than those of HCFC22 while DME showed 28% higher HTCs than those of HCFC22. HTCs of propylene and butane were similar to those of HCFC22 while those of propane and isobutane were similar to those of HFC134a. Based upon the tested data, Nusselt's equation is modified to predict the plain tube data within a deviation of 3%. For 26 fpi low fin tube, Beatty and Katz equation predicted the data within a deviation of 7.3% for all flammable refrigerants tested. The heat transfer enhancement factors for the 26 fpi low fin and Turbo-C tubes were 4.6∼5.7 and 4.7∼6.9 respectively for the refrigerants tested indicating that the performance of Turbo-C tube is the best among the tubes tested.

• Smart Structures and Systems
• /
• 제6권3호
• /
• pp.239-262
• /
• 2010

Tube Lines has carried out a "knowledge and investigation programme" on the deep tube tunnels comprising the Jubilee, Northern and Piccadilly lines, as required by the PPP contract with London Underground. Many of the tunnels have been in use for over 100 years, so this assessment was considered essential to the future safe functioning of the system. This programme has involved a number of generic investigations which guide the assessment methodology and the analysis of some 5,000 individual structures. A significant amount of investigation has been carried out, including ultrasonic thickness measurement, detection of brickwork laminations using radar, stress measurement using magnetic techniques, determination of soil parameters using CPT, pressuremeter and laboratory testing, installation of piezometers, material and tunnel segment testing, and trialling of remote photographic techniques for inspection of large tunnels and shafts. Vibrating wire, potentiometer, electro level, optical and fibre-optic monitoring has been used, and laser measurement and laser scanning has been employed to measure tunnel circularity. It is considered that there is scope for considerable improvements in non-destructive testing technology for structural assessment in particular, and some ideas are offered as a "wish-list". Assessment reports have now been produced for all assets forming Tube Lines' deep tube tunnel network. For assets which are non-compliant with London Underground standards, the risk to the operating railway has to be maintained as low as reasonably practicable (ALARP) using enhanced inspection and monitoring, or repair where required. Monitoring techniques have developed greatly during recent years and further advances will continue to support the economic whole life asset management of infrastructure networks.

• Journal of Plant Biology
• /
• 제39권4호
• /
• pp.273-278
• /
• 1996

Arabidopsis mutants deficient in flavonoid and sinapate ester (tt4 and fah1-7, respectively) were evaluated in vivo and in vitro to study the possible role of flavonoid compounds in pollen tube growth. In vivo, we investigated pollen tube growth in the pistils of the mutants and wild type(Ler). The growth of pollen tubes was significantly different among the three genotypes. In the fal1-7 pistils, the tubes grew to a greater length relative to those of the wild type or tt4. To examine in vitro pollen tube growth, a solid medium was devised for pollen germination and subsequent growth. In vitro, the identical result was obtained; fahl-7 pollens developed the longest tubes and elongated most rapidly. Therefore, the growth response of pollen tubes to phenolic compounds was examined by adding quercetin or sinapate ester in various concentrations to the media. Quercetin enhanced both germination rate and tube growth in the pollens of the mutants and the wild type, especially in tt4. In contrast, sinapate ester inhibits pollen germination and pollen tube growth in three genotypes. These results suggest that flavonoids and related phenolic compounds have physiological role in the plant reproductive system.

• 한국의상디자인학회지
• /
• 제24권3호
• /
• pp.85-96
• /
• 2022

The MZ Generation likes watching YouTube videos produced by senior influencers despite the big age gap. In addition, the final goal of collaborative YouTube videos between senior influencers and brands is to increase sales. Accordingly, this study examined this interesting phenomenon and aimed to provide useful insights for creating YouTube videos targeting the MZ generation. This study was divided into two parts. Study 1 explored the viewers' perceived benefits by looking at the YouTube video comments of a senior fashion influencer, and then classified the perceived benefits into informational, psychological, and hedonic benefits. Study 2 analyzed the relationships among the viewers' perceived benefits (informational, psychological, hedonic benefits), attitude toward a brand, and behavior intention. Study 2 found that only informational benefits, among the three perceived benefits, enhanced attitudes toward a brand, thereby affecting behavior intention. Based on the results of two sub-studies, this study highlights the importance of informational benefits to maximize the marketing effects employing the collaborative YouTube videos of senior influencers and brands.

• Steel and Composite Structures
• /
• 제43권6호
• /
• pp.773-784
• /
• 2022

This paper aims to investigate the axial compressive behavior of reinforced concrete (RC) columns strengthened with self-compacting and micro-expanding (SM) concrete-filled steel tubes (SM-CFSTs). Nine specimens were tested in total under the local axial compression. The test parameters included steel tube thickness, filling concrete strength, filling concrete type and initial axial preloading. The test results demonstrated that the initial stiffness, ultimate bearing capacity and ductility of original RC columns were improved after being strengthened by SM-CFSTs. The ultimate bearing capacity of the SM-CFST strengthened RC columns was significantly enhanced with the increase of steel tube thickness. The initial stiffness and ultimate bearing capacity of the SM-CFST strengthened RC columns were slightly enhanced with the increase of filling concrete strength. However, the effect of filling concrete type and initial axial preloading of the SM-CFST strengthened RC columns were negligible. Three equations for predicting the ultimate bearing capacity of the SM-CFST strengthened RC columns were compared, and the modified equation based on Chinese code (GB 50936-2014) was more precise.