• The Journal of the Korea Contents Association
• /
• v.17 no.2
• /
• pp.26-37
• /
• 2017

This study aims to theoretically and empirically establish the characteristics and component factors of creativity character of college students. Putting together preceding researches related to the concept and structure of creativity character through the theoretical approach, the in-depth interview and open survey were conducted targeting 70 specialists in education, education engineering, consultation meeting, and researchers' meeting about creativity character of college students. In the results, as creativity character for college students, creativity was classified into cognitive creativity and affective creativity while character was classified into moral character, social character, and emotional character. Especially, the creativity character of college students emphasized the importance of character more than creativity. Through such results, it aims to suggest a new perspective on creativity character of college students, and moreover to provide basic data to set up the research direction to develop a tool to measure creativity character of college students for follow-up researches. Also, it is considered to establish the theoretical, empirical foundation contributing to the establishment of teaching-learning method and education engineering qualitatively enhanced in the site of college.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.130-136
• /
• 2009

Delay and Disruption Tolerant Network (DTN) employs message delivery based on a store-and-forward method to conquer no guarantee of continuous end-to-end connectivity. Different from general networks, it is hard for the existing TCP/IP-based routing protocols to correctly work, due to the characteristics such as large latency and unstable link connectivity. Thus, many recent studies focus on routing protocols for DTN. In this paper, we propose a novel routing protocol for DTN with efficient message delivery utilizing mobility information such as direction or destination of mobile nodes. And this protocol is enhanced in terms of delivery ratio, decreases latency and overhead compared to the previously proposed solutions. Simulation results prove its superiority.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.200-207
• /
• 2017

The components that influence recovery were investigated to understand the recovery lived experience of stroke inpatients. Using the phenomenological research methodology reported by Giorgi, 3 conversation sessions were performed on 12 stroke inpatients. The conversations were recorded through agreement, in which the data were analyzed according to the scientific phenomenological methods. Sixteen summarized meaning units were integrated to deduct 10 main meanings and 6 themes. The themes of the restoration experience included the burden of help, performance of independent roles, self-overcoming, return to society, psychological support, and enhanced motivation for recovery. This can be used as data to predict the difficulty that stroke patients experience during hospitalization and propose a direction of intervention for restoration. Rehabilitation experts must provide intervention for the restoration of stroke patients based on the formation of a therapeutic relationship to strengthen the psychological support and motivation, and make strategies for self-overcoming and a proper cooperation relationship with their family.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.4
• /
• pp.329-335
• /
• 2010

We investigate the sources of the variation of the high-latitude thermospheric neutral mass density depending on the interplanetary magnetic field (IMF) conditions. For this purpose, we have carried out the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEGCM) simulations for various IMF conditions under summer condition in the southern hemisphere. The NCAR-TIEGCM is combined with a new empirical model that provides a forcing to the thermosphere in high latitudes. The difference of the high-latitude thermospheric neutral mass density (subtraction of the values for zero IMF condition from the values for non-zero IMF conditions) shows a dependence on the IMF condition: For negative $B_y$ condition, there are significantly enhanced difference densities in the dusk sector and around midnight. Under the positive-$B_y$ condition, there is a decrease in the early morning hours including the dawn side poleward of $-70^{\circ}$. For negative $B_z$, the difference of the thermospheric densities shows a strong enhancement in the cusp region and around midnight, but decreases in the dawn sector. In the dusk sector, those values are relatively larger than those in the dawn sector. The density difference under positive-$B_z$ condition shows decreases generally. The density difference is more significant under negative-$B_z$ condition than under positive-$B_z$ condition. The dependence of the density difference on the IMF conditions in high latitudes, especially, in the dawn and dusk sectors can be explained by the effect of thermospheric winds that are associated with the ionospheric convection and vary following the direction of the IMF. In auroral and cusp regions, heating of thermosphere by ionospheric currents and/or auroral particle precipitation can be also the source of the dependence of the density difference on the IMF conditions.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.204-210
• /
• 2016

This paper presents an experimental analysis of the growth and oxidation processes of soot particles generated in an isooctane diffusive laminar flame due to incomplete combustion. The effects of iron-based diagnostics were employed to measure the elastic scattering light from soot particles in a flame at different flame heights, and the differential scattering coefficients were calculated through a calibration process. The growth and oxidation of soot particles in flame was investigated by comparing differential scattering coefficients, and the soot volume fraction was seen to decrease in the soot oxidation process. In the same manner, the differential scattering coefficients were calculated for iron-based fuel-additive seeded flame, and these coefficients were revealed to be smaller than those obtained in the fuel-additive unseeded flame. In addition, transmission through the radial direction of the flame was measured, and transmission in the soot oxidation regime was approximately 5% higher for the seeded flame. The propensity of the data coincided well with the differential scattering coefficients, and it can be concluded that the iron component of the fuel additive plays a crucial role as a catalyst, which eventually enhanced soot particle oxidation.

• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.499-508
• /
• 2006

Many changes lie ahead for Korea both domestically and internationally including opening of Busan New Port, more active Gwangyang Port as well as rapid growth of Shanghai Port and enhanced services and productivity at Shenzen Port. Compared to newer ports, container terminals in Busan Port possesses old equipment and facilities. Therefore, in order for Busan Port to maintain its service level and remain competitive, it needs to undergo remodeling to enhance productivity. Remodeling activities should be implemented on a continual basis by developing and applying new technologies such as those for gate system, berth system, yard system, and IT system In order to review the alternatives, we performed questionnaire survey and interview. From the result of analysis, we designed the application plan based on priority in remodeling, period of technology application, and direction for application.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.989-995
• /
• 2000

G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ is a very promising material for the high-speed device due to the fact that electron and hole mobilities for the strained G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ are greatly enhanced. Because G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$ has a direct band gap for the proper combination of x and y, it can be applied to the optoelectronic device. Therefore, the study of the electrical property for G $e_{1-x}$ S $n_{x}$G $e_{1-y}$S $n_{y}$(001) with a direct energy gap is needed. G $e_{1-x}$ S $n_{x}$ layer can not be grown thickly due to the large difference of lattice constants. This fact prefers the structure of the device where electrons and holes move in the plane direction. The transverse mobilities of electron and hole for G $e_{0.8}$S $n_{0.2}$Ge(001) are 2~3 times larger than those for Ge/Ge/ sub0.8/S $n_{0.2}$(001). Therefore, G $e_{0.8}$S $n_{0.2}$Ge(001) is expected to be better than Ge/G $e_{0.8}$S $n_{0.2}$(001) for the development of the high-speed device.h-speed device.device.h-speed device. device.

• Journal of KIISE:Software and Applications
• /
• v.36 no.4
• /
• pp.291-297
• /
• 2009

This paper introduces an electronic travel aid, named SmartWand, which detects obstacles using a ultrasonic sensor. In addition to obstacle detection, the SmartWand senses color information of objects and the environmental brightness. It is designed to be attached to a ordinary white cane in order to detect the obstacles at head-hight which cannot be covered by the cane. We have improved the first version of the SmartWand based on a user evaluation. The second version is much lighter and smaller than the previous one. It has been enhanced by two new functions. The SmartWand eliminates impact errors due to tapping the ground using a moving average filtering algorithm and restricts the detection range to the path in the moving direction using an acceleration sensor. We have tested these functions in various environments to determine the parameters for these functions.

• The KIPS Transactions:PartB
• /
• v.16B no.5
• /
• pp.347-358
• /
• 2009

In this thesis, we develop a vision based hand motion recognition system using a camera with two rotational motors. Existing systems were implemented using a range camera or multiple cameras and have a limited working area. In contrast, we use an uncalibrated camera and get more wide working area by pan-tilt motion. Given an image sequence provided by the pan-tilt camera, color and pattern information are integrated into a tracking system in order to find the 2D position and direction of the hand. With these pose information, we estimate 3D motion plane on which the gesture motion trajectory from approximately forms. The 3D trajectory of the moving finger tip is projected into the motion plane, so that the resolving power of the linear gesture patterns is enhanced. We have tested the proposed approach in terms of the accuracy of trace angle and the dimension of the working volume.

• The Korean Journal of Applied Statistics
• /
• v.18 no.2
• /
• pp.281-296
• /
• 2005

This article summarizes our research on estimation of area-specific and time-adjusted rainfall rates during 2004KEOP (Korea enhanced observation period: June 1, $2004{\sim}$ August 31, 2004). The rainfall rate is defined as the proportion of rainfall days per week and areas are consisting of Haenam, Yeosu, Janghung, Heuksando, Gwangju, Mokpo, Jindo, and Wando. Our objectives are to analyze periodicity in area-specific precipitation and the meteorological measures and investigate the relationships between the geographic pattern of the rainfall rates and the corresponding pattern in potential explanatory covariates such as temperature, wind, wind direction, pressure, and humidity. A generalized linear model is introduced to implement the objectives and the patterns are estimated by considering a set of rainfall rates produced using samples from the posterior distribution of the population rainfall rates.