• Korean Chemical Engineering Research
• /
• 제47권6호
• /
• pp.795-800
• /
• 2009

본 연구는 Vortex tube 형 이산화탄소 흡수장치에서 연소배가스 중 $CO_2$ 흡수 특성을 고찰한 것이다. 연소배가스로는 석탄(유연탄)을 연료로 하는 증기발생량 12 ton/hr 규모의 순환유동층 연소보일러에서 발생한 것을 이용하였으며 이산화탄소농도는 11~13 vol% 내외이다. 흡수 용액은 MEA 20 wt%를 기준으로 AMP, HMDA, 강염기계 KOH를 혼합하였다. 본 연구의 목적은 $CO_2$ 흡수장치를 Scrubbing 방식보다 소형화하고, 흡수용액을 절감하는 것이다. 흡수장치는 연소배가스 유량 $20Nm^3/hr$를 처리할 수 있는 직경 17 mm, 길이 250 mm의 Vortex tube 형을 사용하였다. 연소배가스와 흡수용액의 혼합 분무를 통한 $CO_2$ 제거율을 측정하였다. 실험조건은 흡수용액 농도(20~50 wt%), 흡수용액 유량(1.0, $3.0{\ell}/min$)과 연소배가스 유량($6{\sim}15Nm^3/hr$)을 변화시켰다. 결과적으로, MEA에 HMDA를 혼합한 흡수용액의 $CO_2$ 제거율이 가장 우수(약 43% 제거율)하였으며, Vortex tube 장치에서 고속유동의 기 액 접촉효과 및 기 액 분리 특성을 이용하여 $CO_2$ 흡수가 가능하였다. 그러나 $CO_2$ 흡수 효율 향상을 위한 추가적인 공정개발이 요구된다.

• 대한기계학회논문집B
• /
• 제36권8호
• /
• pp.783-789
• /
• 2012

본 연구에서는 나선형 튜브내의 난류 열전달 및 하중 특성을 수치해석 방법을 이용하여 파악하였다. 열교환기와 같은 공학적 설비에서 관내 열전달을 향상시키기 위해 튜브의 형상을 나선형으로 설계한다. 이에 나선형 튜브내의 열전달 및 난류 특성에 대한 많은 실험적 연구가 이루어 졌으나, 대부분의 연구가 압력 강하 및 열전달 상관관계에 초점이 맞추어 진행되었다. 나선형 튜브내의 유동은 원심력에 의해 튜브 바깥쪽에서는 상대적으로 높은 열전달 및 전단응력이 발생하지만, 안쪽에서는 낮은 열전달 및 전단응력이 발생하게 된다. 따라서 본 연구에서는 튜브의 원주방향으로 발생하는 전단 응력 및 Nusselt 수의 변화를 Reynolds 수와 나선 코일의 지름을 변경하며 정량적으로 살펴보았다. 나선 코일 안쪽에서 국부적인 전단응력과 열전달율이 크게 낮게 특정되었으며, 이는 튜브 재질의 안정성에 영향을 미칠 것으로 판단되었다. 또한 본 연구에서는 마찰계수와 Nusselt 수에 대한 기존 상관관계식을 검증하였으며, 직관에서의 마찰계수와 Nusselt 수의 상관관계식이 나선형 튜브의 형상에도 적용될 수 있음을 관측하였다. 본 연구의 결과는 열교환기나 증기발생기의 안전성 평가를 위해 중요한 데이터로 활용될 수 있을 것이다.

• 한국추진공학회지
• /
• 제25권3호
• /
• pp.56-61
• /
• 2021

본 연구에서는 극초음속 비행체의 냉각제로 사용되는 액체탄화수소 연료와 흡열 촉매의 안정적 사용을 위해 Al₂O₃와 H-ZSM-5를 stainless steel tube 내벽에 코팅하는 연구를 수행하였다. 액체탄화수소 연료의 흡열분해 반응에서 coke 생성이 불가피하며, stainless steel tube reactor를 냉각채널로 사용하게 됨에 따라 Fe, Ni 금속이 filamentous coke 생성을 유발한다. 이에 따라 stainless steel에 H-ZSM-5를 코팅함으로써, Fe과 Ni 금속이 액체탄화수소 연료에 직접 노출되는 것을 방지하고 filamentous coke 생성을 억제하고자 하였다. 또한 stainless steel과 H-ZSM-5 사이에는 Al₂O₃을 코팅하여, 부착 강도를 증진 시키고자 하였다.

• Archives of Plastic Surgery
• /
• 제49권5호
• /
• pp.668-675
• /
• 2022

Background Educational resources on the internet are extensively used to obtainmedical information. YouTube is the most accessed video platform containing information to enhance the learning experience of medical professionals. This study systematically analyzed the educational value of microsurgery-related videos on this platform. Methods A systematic review was conducted on YouTube from April 18 to May 18, 2020, using the following terms: "microsurgery," "microsurgical," "microsurgical anastomosis," "free flap," and "free tissue transfer." The search was limited to the first 100 videos, and two independent reviewers screened for eligible entries and analyzed their educational value using validated scales, including a modified version of the DISCERN score (M-DISCERN), Journal of the American Medical Association (JAMAS) benchmark criteria, and the Global Quality Score (GQS). Evaluation of video popularity was also assessed with the video power index (VPI). Results Of 356 retrieved videos, 75 (21%) were considered eligible. The educational quality of videos was highly variable, and the mean global scores for the M-DISCERN, JAMAS, and GQS for our sample were consistent with medium to low quality. Conclusions A limited number of videos on YouTube for microsurgical education have high-educational quality. The majority scored low on the utilized criteria. Peer-reviewed resources seem to be a more reliable resource. Although the potential of YouTube should not be disregarded, videos should be carefully appraised before being usedas an educational resource.

• 한국소음진동공학회논문집
• /
• 제17권5호
• /
• pp.373-378
• /
• 2007

Today, the use of the sound absorptive material is increasing to improve the room acoustics in the auditorium and music hall, etc. Usually, the sound absorption materials have been used to enhance the performance of a noise barrier and improve the room acoustics in construction site. Generally, the sound absorbtion coefficients are the most important factor reflecting the sound absorbtion performance. There are two methods to measure the sound absorption coefficient. The first one is the reverberation room method, and the second is the impedance tube method. In this study, we measure the sound absorbtion coefficients using these two methods, and then we compared the results of the sound absorbtion coefficients to look into the difference of results between reverberation room method and impedance tube method. Also we compared the results of the sound absorbtion coefficients with respect to the size of sample and the volume of reverberation room. From the experiment, we could see that the sound absorbtion coefficients are measured equally for different sample size. But the sound absorbtion coefficients are measured differently according to test methods and test conditions.

• 국제초고층학회논문집
• /
• 제7권3호
• /
• pp.223-232
• /
• 2018

Two novel types of construction detailings, including using the distributive beam and the inner ring diaphragm in the joint between large-section CFT columns and outrigger truss to enhance the transferring efficiency of huge vertical load, and using the T-shaped stiffeners in the steel tube of large-section CFT columns to promote the local buckling capacity of steel tubes, were tested to investigate their working mechanism and design methods. Experimental results show that the co-working performance between steel tube and inner concrete could be significantly improved by setting the distributive beam and the inner ring diaphragm which can transfer the vertical load directly in the large-section CFT columns. Meanwhile, the T-shaped stiffeners are very helpful to improve the local bulking performance of steel tubes in the column components by the composite action of T-shaped stiffeners together with the core concrete under the range of flange of T-shaped stiffeners. These two approaches can result in a lower steel cost in comparison to normal steel reinforced concrete columns. Finally, a practical engineering case was introduced to illustrate the economy benefits achieved by using the two typical detailings.

• Journal of the Optical Society of Korea
• /
• 제10권3호
• /
• pp.99-104
• /
• 2006

We introduce a novel contrast mechanism for imaging superparamagnetic iron oxide (SPIO) nanoparticles (average diameter ${\sim}100nm$) using magneto-motive optical Doppler tomography (MM-ODT), which combines an externally applied temporally oscillating high-strength magnetic field with ODT to detect the nanoparticles flowing through a glass capillary tube. A solenoid cone-shaped ferrite core extensively increased the magnetic field strength ($B_{max}=1\;T,\;{\Delta}|B|^2=220T^2/m$) at the tip of the core and also focused the magnetic force on targeted samples. Nanoparticle contrast was demonstrated in a capillary tube filled with the SPIO solution by imaging the Doppler frequency shift which was observed independent of the flow rate and direction. Results suggest that MM-ODT may be a promising technique to enhance SPIO nanoparticle contrast for imaging fluid flow.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.762-765
• /
• 2005

The absorption materials have been used to enhance the performance of a noise barrier and improve the room acoustics. In this study, 6 products of absorptive materials generally used in Korea were chosen, and their absorption performance were tested in various conditions, that is, it was measured while changing thickness, density and air gap in their back, and measured with or without facing on their face. Finally, the absorption coefficients were compared by reverberation and impedance tube method.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권1호
• /
• pp.11-19
• /
• 2001

To establish optimum cycle of the inverter-driven heat pump with a variation of frequency, the bypass orifice, which was a short tube haying a bypass hole in the middle, was designed and tested. Flow characteristics of the bypass orifice were measured as a function of orifice geometry and operating conditions. Flow trends with respect to frequency were compared with those of short tube orifices and capillary tubes. Generally, the bypass orifice showed the best flow trends among them. and it would enhance the seasonal energy efficiency ratio of an inverter heat pump system, Based on experimental data, a semi-empirical flow model was developed to predict mass flow rate through bypass orifices. The maximum difference between measured data and model`s prediction was within $\pm$5%.

• 소성∙가공
• /
• 제24권5호
• /
• pp.368-374
• /
• 2015

Hydroforming of a non-axisymmetric thin-walled tubular component with variable cross sections was analyzed. In order to solve the sealing problem which occurred due to the thin and non-axisymmetric shape, the use of a lead patch on the punch, which had been successful in hydroforming of thin tubes, was evaluated. A lead patch was attached to the punch to solve the sealing problem, which was caused by the stress gradient in the non-axisymmetric shape. FEM and experiments were also performed to analyze these sealing problems associated with the punch shape and non-axisymmetric shape. Finally, the lead patch was attached at tube surface where intensive local strain concentration would occur to enhance the hydroformability. These methods were successfully used to fabricate non-axisymmetric thin-walled tubular component with variable cross sections that had previously failed during traditional hydroforming.