• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.661-672
• /
• 2012

Lab scale experiments to investigate the dissolution reaction among supercritical $CO_2$-sandstone-groundwater by using sandstones from Gyeongsang basin were performed. High pressurized cell system (100 bar and $50^{\circ}C$) was designed to create supercritical $CO_2$ in the cell, simulating the sub-surface $CO_2$ storage site. The first-order dissolution coefficient ($k_d$) of the sandstone was calculated by measuring the change of the weight of thin section or the concentration of ions dissolved in groundwater at the reaction time intervals. For 30 days of the supercritical $CO_2$-sandstone-groundwater reaction, physical properties of sandstone cores in Gyeongsang basin were measured to investigate the effect of supercritical $CO_2$ on the sandstone. The weight change of sandstone cores was also measured to calculate the dissolution coefficient and the dissolution time of 1 g per unit area (1 $cm^2$) of each sandstone was quantitatively predicted. For the experiment using thin sections, mass of $Ca^{2+}$ and $Na^+$ dissolved in groundwater increased, suggesting that plagioclase and calcite of the sandstone would be significantly dissolved when it contacts with supercritical $CO_2$ and groundwater at $CO_2$ sequestration sites. 0.66% of the original thin sec-tion mass for the sandstone were dissolved after 30 days reaction. The average porosity for C sandstones was 8.183% and it increased to 8.789% after 30 days of the reaction. The average dry density, seismic velocity, and 1-D compression strength of sandstones decreased and these results were dependent on the porosity increase by the dissolution during the reaction. By using the first-order dissolution coefficient, the average time to dissolve 1 g of B and C sandstones per unit area (1 $cm^2$) was calculated as 1,532 years and 329 years, respectively. From results, it was investigated that the physical property change of sandstones at Gyeongsang basin would rapidly occur when the supercritical $CO_2$ was injected into $CO_2$ sequestration sites.

• Microbiology and Biotechnology Letters
• /
• v.39 no.4
• /
• pp.317-323
• /
• 2011

Strain A-3, an amylase-producing bacteria, was isolated from coastal seawater near Daecheon in the Republic of Korea. It was seen to possess a single polar flagella and grow well, on ASW-YP agar plates, at temperatures of between $20-37^{\circ}C$. However, it grew more slowly at the temperatures of $15^{\circ}C$ and $40^{\circ}C$. Similarly, it was observed to grow abundantly, in an Artificial Sea Water-Yeast extract-Peptone (ASW-YP) liquid medium, in a pH range of 6-9, but not grow at pHs of 4-5 and a pH of 10. Strain A-3 was noted as being close to Pseudoalteromonas phenolica O-$BC30^T$, Pseudoalteromonas luteoviolacea $NCIMB1893^T$, Pseudoalteromonas rubra $ATCC29570^T$, and Pseudoalteromonas byunsanensis $FR1199^T$, with 98.30%, 97.86%, 97.78%, and 97.25% similarities respectively, in its 16S rRNA sequence. A phylogenetic tree revealed that strain A-3 and P. phenolica O-$BC30^T$ belong to a clade. However, strain A-3 differed from P. phenolica O-$BC30^T$ in relation to a number of physiological characteristics. Strain A-3 exhibited no growth above 5% NaCl concentrations, no utilization of D-glucose, D-mannose, D-maltose, or D-melibose, and no lipase (C-14) activity. All of these properties strongly indicate that strain A-3 is distant from P. phenolica O-$BC30^T$ and thus led us to name it Pseudoalteromonas sp. A-3. Pseudoalteromonas sp. A-3 produces ${\alpha}$-amylase throughout growth. Maximal amylase activities of 144.48 U/mL and 149.20 U/mL were seen at pH 7.0 and $37^{\circ}C$, respectively. Pseudoalteromonas sp. A-3's high, stable production of ${\alpha}$-amylase in addition to its biochemical features, such as alkalitolerance, suggest that it is a good candidate for industrial applications.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.6
• /
• pp.659-665
• /
• 2008

This study is about zeolite synthesis from the sewage sludge incinerator fly ash of "S" sewage treatment center located in Seoul. For this purpose, the properties of raw fly ash as starting material, the hydrothermal conditions for zeolite synthesis and the environmental applicabilities of synthesized zeolites were examined. Fly ash from sewage sludge incinerator has large quantities of SiO$_2$ and Al$_2$O$_3$ and their contents are 42.8 wt.% and 21.2 wt.% respectively. So fly ash is considered to be possible starting material for zeolite synthesis. The results from leaching test of fly ash showed that the concentration of hazardous metals were very low as compared with the Korea leaching standard of the Waste Management Law. But the concentration from total recoverable test of fly ash were higher than the fertilizer standard of Fertilizer Management Law. Major zeolite products synthesized by hydrothermal reaction are analcime in teflon vessel and zeolite P1 in borosilicate flask. Optimum conditions for the synthesis of analcime were 1 N of NaOH concentration, 16 hour of reaction time and 135$^{\circ}C$ of reaction temperature. For the zeolite P1 formation, the proper conditions were demonstrated to be 5 N of NaOH concentration, 16 hour reaction time and 130$^{\circ}C$ of reaction temperature in this study. Hazardous metal contents in the analcime product are similar with those in raw fly ash. In case of the zeolite P1, the contents are reduced to nearly a half. Raw fly ash and the analcime product showed NH$_4{^+}$ ion exchange capacity of 0$\sim$1.0 mg of NH$_4{^+}$g$^{-1}$ and 3.0$\sim$7.4 mg of NH$_4{^+}$g$^{-1}$, respectively. However, the zeolite P1 product reached exchange capacity to 14.6$\sim$17.8 mg of NH$_4{^+}$g$^{-1}$. This values are in the range of those of natural clinoptilolite and phillipsite. From this point of view, zeolite synthesis from sewage treatment sludge incinerator fly ash is a good alternative for solid waste recycling.

• Current Research on Agriculture and Life Sciences
• /
• v.3
• /
• pp.62-69
• /
• 1985

In order to develop the mechanical fruit harvest system the detachment force, type and torque investigated and analyse as several loading modes were applied on the fruit-stem of the persimmon fruit. A proving ring with strain gauges was used for the experiment. The following conclusions were drawn from the results : The mode of withdrawl of the stem from the calyx appeared highly as the persimmon fruit matured. The mode of failure at the junction of the stem and calyx which was desirable mode for mechanical fruit harvest increased as the angular displacement of the fruit with respect to the stem axis increased from zero to ninety degrees. However the mode of failure of the fruiting branch decreased for the same degree of angle pull as above. The range of detachment force of the persimmon fruit was from 13 to 5 kg. The detachment force decreased from 47 to 8 % as the fruit matured. Also, the force decreased from 31 to 24 % for the same maturity levels as the angular displacement of the fruit with respect to the stem axis increased from zero to ninety degrees. The range of detachment force to weight ratio(F/W) of the fruit was from 130 to 54 approximately. The detachment force to weight ratio (F/W) decreased from 36 to 8 % as the fruit matured. Also, the ratio (F/W) decreased from 49 to 33 % for the same maturity levels as the same degree of angle pull as above. In order to remove fruit from tree the desirable force applied to the stem is approximately from 1,280 to 530 kg. Also, the desirable torque to remove the fruits was approximately from 1.1 to $0.5kg{\cdot}cm$.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.27-38
• /
• 2009

To investigate the feasibility of refuse derived fuels (RDFs) combined of sewage sludge and combustible wastes such as substitutive fuels instead of a stone coal, several different RDFs made with different mixtures of sewage sludge and combustible wastes were analyzed by various experiments. The combustion characteristics for the RDFs were investigated by analyzing fuel gases, and heating values were also measured by a bomb calorimeter. The fundamental properties such as moisture contents, ratios of combustible materials, amounts of ashes, heavy metals, ratios of each chemical elements and heating values were analyzed in accordance with mixing ratios of wt(%) for researching the characteristics of the RDFs. $RDF_{k-1}$ was made of mixing materials which were dried sewage sludge, food wastes and combustible wastes. $RDF_{k-2}$ was made of mixing materials which were peat-moss, tar and sewage sludge. Combustion experiments were carried out at the optimal conditions which were m=2 under air-fuel condition and $850^{\circ}C$. The retention times in the combustor were set at 5, 10 and 15minutes. 50 g of RDFs was put in the combustor for each experiments. The ranges for heating values of $RDF_{k-1}$ with different mixing ratios were from 6,900 kcal/kg to 8120 kcal/kg. The ranges for heating values of $RDF_{k-2}$ with different mixing ratios were from 4,014 kcal/kg to 8,050 kcal/kg. As a result of this study, the heating values, moisture contents, components of chemical elements and mixing ratios of the materials in RDFs had big effects on the efficiency of the combustion. In $RDF_{k-1}$, the higher amounts of combustible wastes in the mixtures, the higher heating values, concentrations of $C_xH_y$ and amounts of ashes were produced. In $RDF_{k-2}$, the higher tar amounts in the mixtures caused the higher heating values, amounts of ashes, concentrations of CO gas and CxHy.

• Journal of the Korean Vacuum Society
• /
• v.15 no.4
• /
• pp.395-403
• /
• 2006

It is known that $MgAl_2O_4$ has higher resistance to moisture than MgO, in humid ambient MgO is chemically unstable. It reacts very easily with moisture in the air. In this study, the characteristic of $MgAl_2O_4$ and $MgAl_2O_4/MgO$ layers as dielectric protection layers for AC- PDP (Plasma Display Panel) have been investigated and analysed in comparison for conventional MgO layers. MgO and $MgAl_2O_4$ films both with a thickness of $1000\AA$ and $MgAl_2O_4/MgO$ film with a thickness of $200/800\AA$ were grown on the Cu substrates using the electron beam evaporation. $1000\AA$ thick aluminium layers were deposited on the protective layers in order to avoid the charging effect of $Ga^+$ ion beam while the focused ion beam(FIB) is being used. We obtained sputtering yieds for the MgO, $MgAl_2O_4$ and $MgAl_2O_4/MgO$ films using the FIB system. $MgAl_2O_4/MgO$ protective layers have been found th show $24{\sim}30%$ lower sputtering yield values from 0.244 up to 0.357 than MgO layers with the values from 0.364 up to 0.449 for irradiated $Ga^+$ ion beam with energies ranged from 10 kV to 14 kV. And $MgAl_2O_4$ layers have been found to show lowest sputtering yield values from 0.88 up to 0.109. Secondary electron emission coefficient(g) using the ${\gamma}$- FIB. $MgAl_2O_4/MgO$ and MgO have been found to have similar g values from 0.09 up to 0.12 for indicated $Ne^+$ ion with energies ranged from 50 V to 200 V. Observed images for the surfaces of MgO and $MgAl_2O_4/MgO$ protective layers, after discharge degradation process for 72 hours by SEM and AFM. It is found that $MgAl_2O_4/MgO$ protective layer has superior hardness and degradation resistance properties to MgO protective layer.

• Korean Journal of Soil Science and Fertilizer
• /
• v.11 no.4
• /
• pp.213-233
• /
• 1979

It is generally agreed that the country's population will grow up to the level of 52 million by the year of 2000 and that due the active growth of industry, urbanization and road constructions, sizable portion of existing arable lands will be utilized for other purposes than agriculture in near future. From 1966 to 1977, it was estimated that, the average annual conversion of arable lands to other uses, was 12,909 ha. If this trend persists, it is predicted that from 1978 to 1991 when the 6th Five Years Economic Development Plan will terminate, approximately 181,000 ha of arable lands will be converted for other uses again. On the other hand, it is certain that the increased population (39 million in 1981, 45 million in 1991, 52 million in 2001) and the changes in food pattern along with the enhancement of living standards will bring about the phenomenal increase in demands for not only the staple food but also the livestock products such as meat, milk and eggs, vegetables and fruits. These future increased demands for various foods, naturally mean the increased needs for the expansion of arable lands at the same time. It is predicted that, if more activities than present scale are not taken for the expansion of arable lands, the national food self sufficiency level will drop from 79% in 1977 down to 62% in 1991. To meet the increased food demands in future, there are several ways and means. These will include the increased land use intensity, elevation of unit area yield levels, minimization of conversion of arable lands to other uses and expansion of arable lands through the reclamations of idle hillside lands and tidal lands. Among these, the expansion of arable lands through reclamations of idle hillside lands and tidal lands are more positive measures to cope with the increased production of foods in future. The reclamation of hillside lands demands more attention because it needs more advanced technologies in agronomical and engineering aspects, larger scale fundings and integrated socioeconomic considerations. In agromical aspects, the thechniques for early improvement of chemical and physical properties of soils, proper soil conservation measures and rational cropping systems are of particular importance. As to the financial supports to encourage the farmings in hillside land, much bold fund inputs are essential for the construction of roads, installation of irrigation and drainage facilities, soil conservation mechanisms, which will ensure the stabilized farming with reasonable incomes in the newly reclaimed lands.

• Korean Journal of Microbiology
• /
• v.42 no.1
• /
• pp.40-46
• /
• 2006

Galactose joined to glucose by a $\beta(1\rightarrow4)$ glycosidic bond makes lactose and this disaccharide is rich in milk. It is known that lacotse is hydrolyzed to each monomeric sugar by either lactase in human or $\beta-galactosidase$ in bacteria. Ingestion of milk by lactase-deficient persons causes a temporary diarrhea and subsequent chronic diarrhea results in colitis with chronic inflammation. We isolated a $\beta-galactosidase$ producing psycrotolerant strain AS-20 from near cattle shed and investigated the growth at various temperature conditions. Whereas Escherichia coli strains did not grow at $10^{\circ}C$, the AS-20 strain could grow well at this low temperature and showed optimal growth at $30^{\circ}C$. The isolated strain was identified as 97% Hafnia alvei by biochemical properties. This strain could ferment glucose, lacotse, maltose, mannitol, xylose, ONPG, rhamanose and L-arabinose, and decarboxylate lysin and ornithine. To confirm the identity of isolated strain we amplified 16S rDNA by PCR and searched similarity of the 1426 bp DNA sequcence with Genbank database. The strain AS-20 showed 99% similarity with Hafnia alvei. The activity of $\beta-galactosidase$ was 1.5 times higher when the cell was grown at 10 or $20^{\circ}C$ than at $30^{\circ}C$. The highest enzyme activity of AS-20 was also much higher than that of E. coli, which was grown at $30^{\circ}C$.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.229-236
• /
• 2014

A stoichiometric mixture of evaporating materials for $MnAl_2S_4$ single crystal thin films was prepared from horizontal electric furnace. To obtain the single crystal thin films, $MnAl_2S_4$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy (HWE) system. The source and substrate temperatures were $630^{\circ}C$ and $410^{\circ}C$, respectively. The crystalline structure of the single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The temperature dependence of the energy band gap of the $MnAl_2S_4$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.7920eV-5.2729{\times}10^{-4}eV/K)T^2/(T+786 K)$. In order to explore the applicability as a photoconductive cell, we measured the sensitivity (${\gamma}$), the ratio of photocurrent to dark current (pc/dc), maximum allowable power dissipation (MAPD) and response time. The results indicated that the photoconductive characteristic were the best for the samples annealed in S vapour compare with in Mn, Al, air and vacuum vapour. Then we obtained the sensitivity of 0.93, the value of pc/dc of $1.10{\times}10^7$, the MAPD of 316 mW, and the rise and decay time of 14.8 ms and 12.1 ms, respectively.

• Journal of Korean Academic Society of Home Health Care Nursing
• /
• v.4
• /
• pp.5-22
• /
• 1997

The purpose of the study was to development an information delivery system for the home nursing service, to demonstrate and to evaluate the efficiency of it. The period of research conduct was from September 1996 to August 31, 1997. At the 1st stage to achieve the purpose, Firstly Assessment tool for the patients with cerebral vascular disease who have the first priority of HNS among the patients with various health problems at home was developed through literature review. Secondly, after identification of patient nursing problem by the home care nurse with the assessment tool, the patient's classification system developed by Park (1988) that was 128 nursing activities under 6 categories was used to identify the home care nurse's activities of the patient with CAV at home. The research team had several workshops with 5 clinical nurse experts to refine it. At last 110 nursing activities under 11 categories for the patients with CVA were derived. At the second stage, algorithms were developed to connect 110 nursing activities with the patient nursing problems identified by assessment tool. The computerizing process of the algorithms is as follows: These algorithms are realized with the computer program by use of the software engineering technique. The development is made by the prototyping method, which is the requirement analysis of the software specifications. The basic features of the usability, compatibility, adaptability and maintainability are taken into consideration. Particular emphasis is given to the efficient construction of the database. To enhance the database efficiency and to establish the structural cohesion, the data field is categorized with the weight of relevance to the particular disease. This approach permits the easy adaptability when numerous diseases are applied in the future. In paralleled with this, the expandability and maintainability is stressed through out the program development, which leads to the modular concept. However since the disease to be applied is increased in number as the project progress and since they are interrelated and coupled each other, the expand ability as well as maintainability should be considered with a big priority. Furthermore, since the system is to be synthesized with other medical systems in the future, these properties are very important. The prototype developed in this project is to be evaluated through the stage of system testing. There are various evaluation metrics such as cohesion, coupling and adaptability so on. But unfortunately, direct measurement of these metrics are very difficult, and accordingly, analytical and quantitative evaluations are almost impossible. Therefore, instead of the analytical evaluation, the experimental evaluation is to be applied through the test run by various users. This system testing will provide the viewpoint analysis of the user's level, and the detail and additional requirement specifications arising from user's real situation will be feedback into the system modeling. Also. the degree of freedom of the input and output will be improved, and the hardware limitation will be investigated. Upon the refining, the prototype system will be used as a design template. and will be used to develop the more extensive system. In detail. the relevant modules will be developed for the various diseases, and the module will be integrated by the macroscopic design process focusing on the inter modularity, generality of the database. and compatibility with other systems. The Home care Evaluation System is comprised of three main modules of : (1) General information on a patient, (2) General health status of a patient, and (3) Cerebrovascular disease patient. The general health status module has five sub modules of physical measurement, vitality, nursing, pharmaceutical description and emotional/cognition ability. The CVA patient module is divided into ten sub modules such as subjective sense, consciousness, memory and language pattern so on. The typical sub modules are described in appendix 3.