• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.271-274
• /
• 2002

The aim of FMEA method which is already generalized in the industry engineering is to grasp a possibility that defect forms will appear. And it is a means of prevention step to let person remove obstacles which have an influence on customers beforehand in order. The two parts of FMEA are Design FMEA which we prepare in an early stage and Process FMEA which we prepare in time previous to mass production. This Study apply Process FMEA to execution fields of the construction industry.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.30-34
• /
• 2012

The SI thermochemical cycle process accomplishes water splitting through distinctive three chemical reactions. We focused on thermodynamic models applicable to the process. Recently, remarkable models based on the assumed ionic species have been developed to describe highly nonideal behavior on the liquid phase reactions. ElecNRTL models with ionic reactions were proposed in order to provide reliable process simulation results for phase equilibrium calculations in Section II and III. In this study, the current thermodynamic models of SI thermochemical cycle process were briefly described and the calculation results of the applied ElecNRTL models for phase equilibrium calculations were illustrated for binary systems.

• Environmental Engineering Research
• /
• v.16 no.4
• /
• pp.237-242
• /
• 2011

In this study, three pilot-scale plants with the capacity 30 $m^3$/day were designed and set up to treat reservoir water for the production of drinking water. Three treatment processes were compared in the pilot testing: process 1 (coagulation- flocculation- sedimentationsand filtration- ozone- BAC); process 2 (coagulation- flocculation- sedimentation- microfiltration-ozone- BAC); and process 3 (coagulation- flocculation- sedimentation- sand filtration- GAC). The quality of water has been evaluated on the basis of selected parameters such as turbidity, color, consumption of $KMnO_4$, dissolved organic carbon (DOC), trihalomethane formation potential (THMFP), geosmin and 2-MIB. A detailed assessment of performance was carried out during a five months operation. Process 2 was found to have better removal efficiency of DOC, THMFP, geosmin and 2-MIB than process 1 and process 3 under identical conditions, although the removal rate of color was found to be the same in the three cases.

• Journal of the Korean Society of Systems Engineering
• /
• v.6 no.1
• /
• pp.25-32
• /
• 2010

The Test and Evaluation (T&E) process is an integral part of the Systems Engineering Process. The purpose of Test and Evaluation (T&E) in a system development is to identify the areas of risk to be reduced or eliminated. In this study, when develop aircraft of Civil Aviation with development experience of Military Aircraft, it is that establish Test and Evaluation process. Test and Evaluation for KC-100 small aircraft development can divide to certification test and development test. Certification test is proved compliance about Korea Airworthiness standard (KAS Part 23), through Development Test verify required performance of aircraft. These Test and Evaluation Process is more efficient and optimized.

• 제어로봇시스템학회:학술대회논문집
• /
• 1994.10a
• /
• pp.1.2-6
• /
• 1994

A state or the arts in Japanese chemical process control is reviewed based on experience in applying advanced process control schemes to several industrial chemical processes. The applications validate model predictive control (MPC), the most popular advanced control scheme in the process control community, as, indeed, a powerful and practical control algorithm. However, at the same time, it is elucidated that MPC can solve only the control algorithm part of the problem and one needs chemical and systems engineering aspects to solve the entire problem. By illustrating several industrial process control problems, the need for chemical engineering aspects as well as the future direction for process control are addressed, especially in light or current attitudes toward product quality.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.494-496
• /
• 1996

The purpose of this study is to investigate the effect of process conditions on pore distribution in porous silicon layer prepared by electrochemical reaction. Porous silicon layers formed on p-type silicon wafer show the network structure of fine porse whose diameters are less than 100${\AA}$. In n-type porous silicon, selective growth was found on the pore surface by wet etching process after PR patterning. And numerical method showed high current density on the pore tip. With this result we confirmed that pore formation has two steps. First step is the initial attack on the surface and second step is the directional growth on the pore tip.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.05a
• /
• pp.135-144
• /
• 1999

A major concern in Concurrent Engineering is the control and management of workload in a period of process. As a general rule, leveling the peak of workload in a certain period is difficult because concurrent processing is comprised of various processes, including overlapping, paralleling and looping. Therefore, workload management with resource constraints is so beneficial that effective methods to analyze design process This study presents a procedure to transform the IDEF3 process model into the precedence logic network model for more useful assessment of the process. This approach is expected to facilitate resolving resource constrained scheduling problems more systematically in Concurrent Engineering environment.

• Design & Manufacturing
• /
• v.2 no.1
• /
• pp.1-5
• /
• 2008

Restriking method is to add to process in order to get the correct size and high precision accuracy of product which is formed in pre-process. This method is widely used at bending work and drawing work. Restriking die is particularly design and used as restriking process is performed. Therefore, production cost is increasing as one process or a two process are added. In this paper, punches and die block of square shell drawing die which could be performed drawing work and restriking process by using only one die are designed in order to solve these factors. The structure of sectional die which can integrate drawing die and restriking die was developed.

• Transactions of Materials Processing
• /
• v.21 no.8
• /
• pp.467-472
• /
• 2012

Shaving shear-welding is a solid-state welding process, which utilizes plastic deformation of surplus material. The solid-state nature of this process contributes to high integrity and strength of the weld. The objective of this study was to investigate the effects of process variables on the material flow patterns and identify the process condition for obtaining the best weld. FEM simulations were carried out along with experimental characterizations. The results showed the importance of the cutter angles and the overlap lengths, and helped attain the optimum shaving shear-welding die and the best process condition.

• Proceedings of the KWS Conference
• /
• 2003.05a
• /
• pp.29-31
• /
• 2003

Generally, the Quality of a weld joint is strongly influenced by process parameters during the welding process. In order to achieve high quality welds, mathematical models that can predict the bead geometry to accomplish the desired mechanical properties of the weldment should be developed. To achieve this objectives, a sensitivity analysis has been conducted and compared the relative impact of three process parameters on bead geometry in order to verify the measurement errors on the values of the uncertainty in estimated parameters. The results obtained show that developed mathematical models can be applied to estimate the effectiveness of process parameters for a given bead geometry, and a change of process parameters affects the bead width and bead height more strongly than penetration relatively.