• Journal of Engineering Education Research
• /
• v.21 no.6
• /
• pp.54-62
• /
• 2018

This study is an analysis of the process of the discovery of the DNA double helix structure from an engineering literacy education perspective. The explanation of the DNA double helix structure by James Watson and Francis Crick in 1952 is a well-known scientific episode. The process is also a combination of various incidents that can frequently happen in competitive engineering research and development situations. Therefore, the process of the discovery of the DNA structure is a remarkable event that can cover all subjects, such as engineering and ethics, research ethics, communication between researchers, engineering and leadership, engineering and teamwork, and engineering and women. This paper focuses on analyzing the research ethics issues associated with Rosalind Franklin and comparing and analyzing the three teams that were very close to the discovery of the DNA structure. By looking at why the Watson and Crick team got the final answer instead of the Linus Pauling's team or the Maurice Wilkins and Rosalind Franklin's team, the virtues of the technology development process that should be taught in engineering literacy education will be naturally presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.8
• /
• pp.96-103
• /
• 2009

The roll forming process is commonly used for the conventional 'Fe' metal products such as a furniture drawer guide or an up-down slide guide. Recently its applications are variously expanded to the sanitary facilities or electronic devices. It is essentially required the cleanness for the high technology application and any corrosion or rust are not allowed. Therefore, in those applications the stainless steel materials are strongly demanded as the substitution of 'Fe' steel. However the mechanical properties of stainless steel are not suitable for forming process compared with those of 'Fe' steel. Up to now, the conventional F.E.M.(Finite Element Method) has been used to analyze and design the roll forming process. The purpose of this research is to obtain the proper production process and the shape of rolls to manufacture the high precision slide rails made of stainless steel material. The commercial program, SHARPE-RF, is used to analyze the entire roll forming process. The results show that the rolling process and the roll design by F.E.M. are useful from the good agreement between the shapes of products estimated by F.E.M. and those of the actual products.

• Journal of Korean Institute of Industrial Engineers
• /
• v.37 no.2
• /
• pp.153-162
• /
• 2011

The demands of complicated data communications have issued a new challenge to port logistics systems. Customers expect ports to handle their generated administrative data while a vessel is docked in a port. One port logistics system, known as the Vessel Clearance Process (VCP), manages large numbers of documents related to port of entry. In the VCP, information flows through many organizations such as the port authority, shipping agents, marine offices, immigration offices, and others. Therefore, for effective management of the Business Process (BP) of the VCP, a standardized method of BP modeling is essential, especially in heterogeneous system environments. In a port, according to port policy, terms and data are sued that are similar to but different from those of other logistics partners, which hinders standardized modeling of the BP. In order to avoid tedious and time-consuming document customization work, more convenient modeling of BP for VCP is essential. This paper proposes an ontology-based process similarity measurement to assist designer for process modeling in port domain, especially VCP. We expect that this methodology will use convenient and quick modeling of port business processes.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.112-123
• /
• 2018

In this paper, we focused on the safety of workers in a remanufacturing process where a risk analysis is not carried out and suggested a criteria for evaluating injury risk. We analyzed a disassembly and a reassembly, which are important for the remanufacturing process. The disassembly includes the disassembly of product and the disassembly process of part and the reassembly includes only reassembly of part. First of all, we analyzed the remanufacturing process and a type of injury. Then, we reviewed the standards and determined the criteria for a severity and an occurrence. We set a bigger weight for the severity to allow the greater impact. And the injury risk score was defined as a sum of the weighted severity and the weighted occurrence. We conducted a qualitative analysis of the experience of field workers based on the criteria we set up. Questionnaires for the evaluation were formulated through interviews with experts.

• IE interfaces
• /
• v.16 no.3
• /
• pp.375-381
• /
• 2003

To ensure competitiveness in the modern automotive market, process planning should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflows and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete process planning for a whole general assembly system is a huge and complex job, several process planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. In this research, a web-based system for concurrent and collaborative process planning for automotive general assembly is developed. By using this system, savings in time and cost of assembly process planning are possible, and the reliability of the planning result is improved.

• Journal of the Korean Society for Heat Treatment
• /
• v.8 no.4
• /
• pp.333-339
• /
• 1995

The reduction and diffusion process(R-D process) is an economical way to produce the functional materials which contain rare-earth elements and has been applied to the production of rare-earth magnet meterials($SmCo_5$, $Nd_{15}Fe_{77}B_8$), magneto-optical(MO) target materials and hydrogen storage alloy, etc. However, because of difficult to control of the final composition, the R-D process has not been applied to production of the 2-17 type rare earth permanent magnet materials which contain several elements. Therefore, this work was as a basic study for the production of the 2-17 type rare earth permanent materials with composition $Sm(Co_{0.72}Fe_{0.21}Cu_{0.05}Zr_{0.03})_{7.9}$ by the R-D process, the following were mainy examined ; the amount of metallic calcium as a reductant, homogenization condition of the alloy after the R-D reaction, masuring of magnetic properties of the sample after step aging. The sample prepared by the R-D process contained a little more oxygen than that prepared by the melting method, however, showed almost the same magnetic properties.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.198-213
• /
• 2012

Navy ship acquisition management business contributed to the korean Navy and defense exports with government suppliers in Korea for over 40 years. But due to advanced technology, development trend of Navy ship and defense export requirements, it enable to make a contribution to a better system improvement are being demanded. In this paper, an adjective Navy ship acquisition process is presented in order to improve the acquisition process takes the first step for acquisition planning process to enhance the efficiency and rationality that is based on consensus of Navy ship expert and experienced. In addition, systems engineering (SE) and quality control (QC) techniques based on Modeling and Simulation are investigated to carry out efficient project management and scientific quality control system in Navy ship acquisition process. Finally, it is suggested to apply SE/QC based on M&S for Navy ship acquisition process using civilian infrastructure and organizations in order to take advantage of the world's leading domestic industry based on considering the difficult conditions of Navy ship suppliers.

• Design & Manufacturing
• /
• v.14 no.1
• /
• pp.36-41
• /
• 2020

Recently, due to the development of MEMS technology, researches for the production of effective micro structures and shapes have been actively conducted. However, the process technology based on chemical etching has a number of problems such as environmental pollution and time problems due to multi-process. Various processes to cope with this process are being studied, and one of the mechanical etching processes is the powder blasting process. This process is a method of spraying fine particles, which has the advantage of being an effective process in manufacturing hard brittle materials. However, it is also a process that adversely affects the material surface roughness and material properties due to the impact of the injection of fine particles. In this study, after fabricating micro-channels in fused silica glass with excellent optical properties among the hard brittle materials, we used the nano indentation system to analyze the micro parts using nano-particles as well as machinability and surface roughness analysis of the processed surface. The analysis was performed for the effective processing of powder blasting.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1093-1100
• /
• 2014

The goal of this paper is to investigate preliminary the applicability of 3D printing technologies for the development of the hot bulk forming process and die. 3D printing technology based on the plastic material was applied to the preform design of the hot forging process. Plastic hot forging dies were fabricated by Polyjet process for the physical simulation of the workpiece deformation. The feasibility of application of Laser-aided Direct Metal Rapid Tooling (DMT) process to the fabrication of the hot bulk metal forming die was investigated. The SKD61 hot-working tool steel was deposited on the heat treated SKD61 using the DMT process. Fundamental characteristics of SKD 61 hot-working tool steel deposited specimen were examined via hardness and wear experiments as well as the observation of the morphology. Using the results of the examination of fundamental characteristics, the applicability of the DMT process to manufacture hot bulk forming die was discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.5
• /
• pp.55-62
• /
• 2004

The logistics of entire shipbuilding process are integrated during the block erection process and the schedules for the erection process are made prior to. the schedules of any other processes. Therefore, efficient scheduling of the block erection process are one of most important issues in shipbuilding. There are only a few studies published regarding block erection scheduling methods because of its complexity and variability. This paper proposes an algorithm for diminution of maximum load based on constraint satisfaction technique. it is developed primarily for the efficiency in load leveling and applicability to the actual block erection process. The proposed algorithm is applied to actual block erection process and the results shows improvements in load leveling. It can also be used for the scheduling of fabrication, sub-assembly, and assembly to improve load leveling.