• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.5
• /
• pp.581-587
• /
• 2014

Sediment basin that is typical facility installed for development business to prevent soil erosion has low removal efficiency and therefore, it causes complaints from the residents and has a bad effect on ecosystem. Thus there is a limit to control soil erosion using the existing design methods of sediment basin, so the purposes of this study is providing suitable design factors for sediment basin with regarding soil characteristic of development areas and analysing sedimentation characteristic by inflow concentration changes. The results, for analyzing the sedimentation characteristic by soil concentrations within approximately 2,000 ~ 20,000 mg/L of initial SS concentration, indicated similar sedimentation trends for same soil in the supernatant regardless of initial concentrations. However, for different soil characteristic (percent finer), there are different results in sedimentation rate and concentrations of the supernatant. Thus it is recommended that sediment basin to prevent soil erosion during construction should be designed based on retention time derived from soil sedimentation experiments regardless of inlet concentration. In addition, installing the soil erosion prevention facility at the back to satisfy effluent water quality should be considered to minimize soil erosion effectively.

• Journal of Drive and Control
• /
• v.10 no.3
• /
• pp.27-33
• /
• 2013

Solenoid valve has used in various industrial field extensively. A solenoid valve has different size, shape and method of operation accordantly to industrial field. Many researchers study on kinds of solenoid valve such as flow rate, dynamic, magnetic field, valve shape and operating method. But the flow rate characteristic and dynamic response time performance on the diaphragm valve are not studied. This paper describes the flow rate characteristic and dynamic response time performance on the diaphragm valve. At first, the diaphragm valve is simulated in AMESim simulation tool. AMESim model found that an effect of valve performance depends on parameter. The parameter is the diaphragm orifice area. And the performance test bench confirms the effect in this parameter. Finally, it finds out the flow rate characteristic and dynamic response time performance on the diaphragm valve.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.3
• /
• pp.1-9
• /
• 2007

The purpose of this study was going to research relation of job stress and society psychologic stress according to general characteristic, work characteristic, health characteristic and personality characteristic for the occupational therapist in the working domestic rehabilitation therapy with hospital and welfare center occupational therapist. The research was 91 of withdrawal questionnaire among 102 occupational therapist from 1. November 2005 to 31. December 2005. In the result of analysis the given question for the ninety one occupational therapist showed just normal group 25% 23 person, potential stress group 47% 43 person, and the rest 28% 25 person high risk group. The result shows significance different in general characteristic of job stress about age, final scholarship and marriage. Job stress was included income, working time, office form and working position etc. Health special job stress was significance different according to sleep time. So we have to know a fact of job stress of occupational therapist and prevent of loss of business services. And we have to endeavoring removals factor of stress and good office culture fixation.

• Transactions on Electrical and Electronic Materials
• /
• v.7 no.6
• /
• pp.283-292
• /
• 2006

So that high-strength and electrical properties apply by excellent high voltage insulator electricity material, ATH content and platinum-based flame retardant that influence in flame retardant and tracking characteristic among composite of silicone rubber studied mechanical strength and influence getting to electrical properties. Composition of ${\alpha}$, ${\omega}-vinyl$ poly (dimethyl-methylphenyl) siloxane(VPMPS) of a polymer quantity made doing mole of D4, $D3^{Me,Ph}$ and VMS by 1000:15:0.2 mole ratio and uses basic catalyst tetramethylammonium silanolate(TMAS) and do opening equilibrium polymerization to be used to main polymer for high voltage insulation insulator. Control ATH content and content of platinum-based flame retardant and made high voltage insulation silicone rubber. Measured mechanical strength of making silicone rubber using UTM, and tracking characteristic according to standard of IEC 60587, flame retardant test studied effect that flame retardant characteristic gets in tracking characteristic, measuring according to UL94V method of test.

• Transactions on Electrical and Electronic Materials
• /
• v.9 no.5
• /
• pp.213-219
• /
• 2008

Pulse waves continuously change with respect to the characteristics and status of the cardiovascular system and in relation to the blood pressure (BP) and the pulse wave velocity (PWV). Monitoring the vascular condition by analyzing the variations in pulse waveforms has been used to diagnose vascular disorders and in drug treatment of arteriosclerosis and peripheral circulatory obstruction. In this paper, we investigated the vascular characteristic index with regard to the BP and classified by pulse wave signals. The pressure pulse wave and photoplethysmography (PPG) were measured simultaneously while subjects exercised, producing changes in the BP, to analyze the variation in the vascular characteristic index. We investigated the correlation between the BP and vascular characteristic index with regard to the classification methods of the pulse wave. The reflection index (RI) and vascular stiffness index were correlated with the diastolic BP, but no correlation was found between these parameters and the systolic BP. These results suggest the possibility of estimating BP through simple measurements of pulse waves.

• Korea-Australia Rheology Journal
• /
• v.17 no.4
• /
• pp.157-164
• /
• 2005

Hydrodynamic characteristic of surfactant drag-reducing flows is still not fully understood. This work investigated the temperature and diameter effect on hydrodynamic characteristic of cationic surfactant drag reducing flows in pipes. Solution of oleyl bishydroxyethyl methyl ammonium chloride (Ethoquad O/12), 900 ppm, as a cationic surfactant and sodium salicylate (NaSal), 540 ppm, as a counter-ion was tested at 12, 25, 40, and $50^{\circ}C$ in pipes with diameter of 13, 25, and 40 mm. Drag reduction effectiveness of this surfactant solution was evaluated in 25 mm pipe from 6 to $75^{\circ}C$. Rheological characteristic of this solution was measured by stress control type rheometer with cone-and-plate geometry. Scale-up laws proposed by previous investigators were used to evaluate the flow characteristic of the solution. It was found that this surfactant solution has clear DR capability until $70^{\circ}C$. Result of this work suggested that temperature has a significant influence in changing the hydrodynamic entrance length of surfactant drag reducing flows. From rheological measurement, it was found that the solution exhibits Shear Induced Structure at all temperatures with different degree of peak viscosity and critical shear rate.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.10
• /
• pp.946-952
• /
• 2010

A method for the identification of structural characteristic parameters of a steel bar in the matrices form such as stiffness matrices and mass matrices from frequency response function(FRF) by genetic algorithm is proposed. As the method is based on the finite element method(FEM), the obtained matrices have perfect physical meanings if the FRFs got from the analysis and the FRFs from the experiments were well coincident each other. The identified characteristic matrices from the FRFs with maximun 40 % of random errors by the genetic algorithm are coincident with the characteristic matrices from exact FEM FRFs well each other. The fitted element diameters by using only 2 points experimental FRFs are similar to the actual diameters of the bar. The fitted FRFs are good accordance with the experimental FRFs on the graphs. FRFs of the rest 9 points not used for calculating could be fitted even well.

• Proceedings of the KIEE Conference
• /
• 2008.04c
• /
• pp.35-37
• /
• 2008

This paper deals with a design to improve operating characteristic of spoke type BLDC motor. The rotor and stator is redesigned as rounding teeth of stator and pole surface of rotor. Result, cogging torque is reduced greatly. The Finite Element Analysis(FEM) is used to characteristics. The Prototype has been manufacturing to confirmed the validity of the proposed technique.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.405-407
• /
• 1987

We calculated the discharge resistance, which is determined by plasma dynamics, of the discharge pumped excimer lasers with charge-transfer type. And investigated the characteristic of discharge voltage and current using EMIP.

• Journal of Ocean Engineering and Technology
• /
• v.18 no.6 s.61
• /
• pp.22-28
• /
• 2004

A mathematical model has been developed to evaluate the capability of sea water exchanges under tidal and diffusive environments and has been verified through comparison with numerical experiments. From the mathematical analysis, this study presents the rates of sea water exchanges due to the tidal inflow and diffusion process. The port characteristic length $L_p$ is the most significant evaluation index.