• Journal of Advanced Marine Engineering and Technology
• /
• 제26권6호
• /
• pp.679-687
• /
• 2002

In this study, a cycle simulation using a two-zone model is carried out to investigate the effect of intake charging conditions such as oxygen concentration, temperature and pressure on NO emissions in a DI diesel engine. The model is validated against measurements in terms of cylinder pressure, torque, BSFC and NOx emissions with 2902 cc DI diesel engine. Calculated results can be summarized as follows. The oxygen concentration in the intake charge is decreased with increasing of EGR rate and equivalence ratio. As the intake oxygen concentration is reduced, the combustion pressure and the burned gas temperature decrease and, as a result, NO formation decreases. Also, the results show that as the intake pressure increases and the intake temperature decreases, NO emissions are effectively reduced.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.59-62
• /
• 2008

This paper presents an approach of complex control method(CCM) real-time simulation and rapid prototyping for aero-engine control system and describes its principle and realization in detail. This approach is mainly based on MATLAB/RTW for rapid prototyping from system modeling to embedded implementation. According to the simulation results between automatic code and manual code for an aeroengine multi-variable control method, it shows that this approach is feasible and effective, and not only decreases development cycle but also improves the reliability and universality. So a series of problems can be resolved during the simulation stage and rapid application to prototype testing.

• 한국군사과학기술학회지
• /
• 제4권1호
• /
• pp.41-51
• /
• 2001

In this paper, the mathematical modeling and the design of controllers were performed for the dynamic performance simulation of the diesel engine for underwater vehicle. Nonlinear equations are acquired through the mathematical modeling using mean torque production model technique. Three kinds of controllers were designed for the perform simulation of the engine model. As the result of simulation, it was confirmed that each controller can be applied with regard to system characteristics and desired conditions etc.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.80-89
• /
• 1993

Performance simulation for a Spark Ignition Wankel rotary Engine is presented in this paper. The volume of chamber at each eccentric shaft angle is evaluated by using geometric models of housing and rotor. A thermodynamic model which includes the first law of thermodynamics, combustion and convective heat transfer from chamber contents to surroundings is imployed. A thermochemical equilibrium model which considers 10 species(CO, $CO_2$, $O_2$, $H_2$, $H_2O$, OH, O, NO, $N_2$) in the burned gas region, is also employed. Four processes of gas exchange, compression, combustion and expansion are considered and the pressure, temperature and composition of chamber gas at each eccentric shaft angle in each process are computed in this performance simulation. This performance simulation must be useful for optimal design of Spark Ignition Wankel Rotray Engine with parametric study for various design parameters and operating conditions.

• International Journal of Automotive Technology
• /
• 제8권6호
• /
• pp.675-685
• /
• 2007

A single cylinder SI engine with a VVA system is modeled by the coupling of a commercial 1D simulation package and an additional combustion model and validated by comparison with experimental data. A number of simulations are carried out to investigate the effects of five different VVA systems on the performance and fuel efficiency of the baseline engine. Finally, the simulation model is applied to an extensive computational study to map out the strategies to operate the engines with dual CVVT and dual CVVT-2 step VVL systems in a fuel-efficient manner.

• 오토저널
• /
• 제5권2호
• /
• pp.48-55
• /
• 1983

The prediction of performance and emissions is presented for a spark ignition engine. a two zone, zero-dimensional model was employed which included thermodynamics, combustion and hear transfer, and a kinetic model employed for NOx. The model was used to analyze the processes of compression, combustion and expansion. Cylinder pressures and temperatures were calculated as a function of crankangle as well as engine performance and emissions. Predictions made with the simulation were compared with experimental data from a four cylinder spark ignition engine. Calculated pressures and, Co and Co$_{2}$ concentrations showed acceptable quantitative agreement with data. But calculated No concentrations were slightly different. A parametric study of the effect of variations in speed, combustion duration and spark timing was carried out. This simulation can be useful for design of spark ignition engines.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.341-346
• /
• 2000

A numerical simulation has been carried out for the engine cooling system. It is the important element to analysis of heat transfer process in cooling system for an automotive engine. Thus, the purpose of this simulator is to present useful information at the early stages of the design of the cooling system by enabling the development engineer to predict performance trends. This program has useful window interface for analysis of the cooling system and it is convenient for user to control data with relational database. The system was simulated and compared with experimental data. As a result, the inlet, outlet temperature of the radiator by the simulator agrees well with it. It is concluded that this simulation program is available in developing the cooling system for a new car.

• 한국음향학회지
• /
• 제11권4호
• /
• pp.5-13
• /
• 1992

엔진의 가진력으로 인해 발생되는 차량의 진동은 승차감에 큰 영향을 미치며, 또한 엔진 마운트 계의 동역학적 특성은 차량의 진동 및 소음에 직접적인 영향을 준다. 본 논문에서는 승용 지이프차의 엔진 key-off시 엔진 가진력으로 인한 차체 흔들림(body shake)을 실험을 통하여 측정함과 동시에 매카니즘해석 전용 프로그램인 DADS를 이용한 컴퓨터 시뮬레이션을 통하여 고찰하였다. 컴퓨터 시뮬레이션 모델은 엔진, 후레임이 포함된 차체, 앞 엑슬 그리고 뒤 엑슬로 구성되며, 각 엑슬은 좌우에 타이어를 고려하였다. 실험에서 얻은 차체 흔들림의 실험 결과와 컴퓨터 시뮬레이션한 결과를 비교 검토하였으며, 검증된 컴퓨터 시뮬레이션 모델을 통하여 엔진 마운트 고무의 강성, 엔진마운트의 설치각도 및 마운트 위치를 변경하여 key-off 시 자체 흔들림을 고찰함으로써 엔진 key-off 시의 차체 흔들림의 감소를 확인하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
• /
• pp.32-39
• /
• 2005

Recently, renewed interest on the scramjet engine has been demonstrated through the many international activities along the several Asia-Pacific countries. Here, a short review of current activities on supersonic combustion in a scramjet engine will be addressed followed by the discussions on the review of numerical simulation on supersonic combustion phenomena related with scramjet engine combustors and ram accelerator. Emphasis was put on the grid refinement, scheme, unsteadiness and phenomenological differences.

• International Journal of Automotive Technology
• /
• 제7권4호
• /
• pp.459-468
• /
• 2006

The objective of this paper is the development of the forward-looking dynamic simulation model of a hybrid electric vehicle(HEV) for a fuel economy study. The specification of the vehicle is determined based on two factors, engine peak power to curb weight ratio and specific engine power. The steady state efficiency models of the powertrain components are explained in detail. These include a spark ignition direct injection(SIDI) engine, an integrated starter alternator(ISA), and an infinitely variable transmission(IVT). The paper describes the integration of these models into a forward facing dynamic simulation diagram using the AMESim environment. Appropriate vehicle and driver models have been added and described. The controller was designed in Simulink and was combined with the physical powertrain model by the co-simulation interface. Finally, the simulation results of the HEV are compared with those of a baseline vehicle in order to demonstrate the fuel economy potential. Results for the vehicle speed error and the fuel economy over standard driving cycles are illustrated.