• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.5
• /
• pp.1358-1364
• /
• 2016

Maritime accidents caused by a ship include collisions, sinking, stranding and fire etc. This study is intending to consider fire accidents among such diverse marine accidents. It is much likely that various sorts of fires break out because crewmen are living in a narrow space for long periods of time consequent on the ship's characteristic of sailing on the sea. According to the ship fire survey, about 50% of the total fire accidents occurred at an engine room, and the main fire origin was analyzed to be oil. In addition, ship fire breaks out in the order of baggage racks and living quarter. In short, the survey indicates that all sorts of fires belonging to A, B, C and D-class have occurred. This study, targeting an actual passenger ship 'A', found the response time to evacuation, during which the people on board a ship recognize the outbreak of fire, and act, and the travel time for evacuation which is the actual travel time. In addition, this study carried out a simulation through the special program for fire analysis - FDS (Fire Dynamics Simulator) in order to find the effective evacuation time, i.e. life survival time. Particularly, this study did comparative analysis of the influence on the survival of passengers and crew based on the collected simulation data by fire size and sort. As a result of the analysis, it was found that when examining the only actual evacuation movement time excepting the response time to evacuation, people are safe by completing evacuation before the effective evacuation time only in case fire size is 100Kw among all sorts of fires. In other words, in case of the outbreak of fire more than 1 MW, it was found to fail to meet evacuation safety regardless of fire size.

• Journal of Navigation and Port Research
• /
• v.41 no.5
• /
• pp.277-286
• /
• 2017

IMO introduced e-Navigation concept to improve the efficiency of ship operation, port operation, and ship navigation technology. IMO proposed sixteen MSPs (Maritime Service Portfolio) applicable to the ships and onshore in case of e-Navigation implementation. In order to meet the demands of the international society, the system implementation work for the Korean e-Navigation has been specified. The Korean e-Navigation system has five service categories: the S2 service category, which is a ship anomaly monitoring service, is a service that classifies emergency levels according to the degree of abnormal condition when a ship has an abnormality in ship operation, and provides guidance for emergency situations. The navigation safety module is a sub-module of the S2 service that determines the emergency level in case of navigation equipment malfunctioning, engine or steering gear failure during navigation. It provides emergency response guidance based on emergency level to the abnormal ship. If an abnormal condition occurs during the ship operation, first, the ship shall determine the emergency level, according to the degree of abnormality of the ship. Second, an emergency response guidance is generated based on the determined emergency level, and the guidance is transmitted to the ship, which helps the navigators prevent accidents and not to spread. In this study, the operational concept for the implementation of the Korean e-Navigation system is designed and the concept is focused on the navigation safety module of S2 service.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.11a
• /
• pp.253-256
• /
• 2007

The web server for the embedded Linux system(ELS), unlike the ones for the usual Linux or Windows, has some disadvantages such as small number of installable applications, low compatibility and limited extensibility. This fact raises some problems when data are transferred in real-time via the web server, which are mainly caused by a poor performance of the processor and small-sized memory. Conventional user interfaces adopted for the usual web servers are unsuitable for the ELS because they are platform-limited and their installations are done by the form of plug-ins. If the web server for the ELS has an Ajax engine that can be utilized without any installation procedure, the advantages of usability, accessibility and quick response time can be obtained. This paper presents the Ajax interface for the ELS web server. The efficiency of the proposed technology in the real-time remote monitoring is shown through an implementation.

• Journal of Engineering Education Research
• /
• v.18 no.2
• /
• pp.3-7
• /
• 2015

Entrepreneurship has been considered as an engine to lead economy, which has been resulting in a focus on entrepreneurship education to promote entrepreneurship. This paper focuses on science and engineering students, and analyzes the relationship between entrepreneurship education and entrepreneurship level. The response results of 950 students (34 universities) were as follows. First, the entrepreneurship level of science and engineering students are a little high but not as significant more than non-science and engineering. Second, science and engineering students have an impact on the level of entrepreneurship about entrepreneurship courses. Third, entrepreneurship courses and clubs have an effect on entrepreneurship level. As a conclusion, we have to improve the quality of entrepreneurship education, recognize startup as a credit, and build up entrepreneurship education ecosystem through the local area network.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.109-120
• /
• 1996

Serpentine belt drive system offers the advantages of light weigh, low cost, quientness, and efficiency. Since these belts are typically longer than conventional belts, a tensioner component is added to maintain acceptable belt tension levels and make no slippage between pulleys and belts. This paper addresses the modeling and analysis of the automotive belt drive systems and also addresses the predicton of slippage on rotational modes. Vibration characteristics are determined from the eigenvalue problem governing the free response. Under certain engine operating conditions, the dynamic tension fluctuations may be sufficient to cause the belt to slip on particular accessory pulleys, It is found that this slippage can be reduced by adding the tensioner component from the analysis of belt tension and belt compression.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.111-122
• /
• 2002

European offset impact analysis of an electric vehicle was done using the robust design method. Section properties of some of the vehicle structure components which influence the european offset impact characteristics were chosen as the main factors fur the design. Eight factors were considered for the analysis: one with two level and seven with three level combinations comprising the L$\_$18/(2$^1$$\times$3$\^$7/) orthogonal array. It is shown that the sensitivities of the factors and the best combination of the factors can be obtained. One of the noteworthy results is that the design with the lower stiffness of the front components of engine room than the rear components can absorb more crash energy. Also it is shown that there exist interactions between some of factors considered.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.04a
• /
• pp.155-160
• /
• 1996

The vibration analysis of the automobiles has been a good subject for the engineers seeking solutions for more comfortable life. In the area of industrial vehicles, however, the seriousness of the vibration annoyance has not been considered so much. In this paper, a finite element model was built which was good for the low-frequency system(of fork-lift truck), and a forced vibration analysis was obtained for the component of 2n of harmonic orders from engine excitation to this model. Finally, a design optimization upon dynamic responses was made to minimize the vibration acceleration level at selected points representing the vibration level of the whole system.

• Journal of Biosystems Engineering
• /
• v.26 no.3
• /
• pp.237-244
• /
• 2001

This work was intended to investigate the effect of vibration transmission paths on the ride vibration of tractor during the rotavating and transporting operations by applying the vibration path analysis method. Accelerations at the cab mounts were measured during the rotavating and transporting operations. Ride vibrations at the sear were than calculated using the measured accelerations at the cab mounts, and the frequency response functions and inertances between the seat and cab mounts, which were derived experimentally by the impact hammer test in static condition. The human sensitivity to vibration frequency was also taken into consideration for the calculation of ride vibrations at the 1/3 octave center frequencies in the frequency domain. Vibrations transmitted through rear cab mounts affected more significantly the ride vibration of tractor. The peak accelerations at the seat occurred at the frequencies of the engine and crank speed, and the frequency induced by tire lugs on the road transportation. It was found that the rear cab mounts should be improved in order to reduce the ride vibrations more effectively.

• IE interfaces
• /
• v.18 no.1
• /
• pp.10-21
• /
• 2005

With the increasing proliferation of World Wide Web, electronic mail systems have become very widely used communication tools. Researches on e-mail classification have been very important in that e-mail classification system is a major engine for e-mail response management systems which mine unstructured e-mail messages and automatically categorize them. In this research we compare the performance of Naive Bayesian learning and Centroid-Based Classification using the different data set of an on-line shopping mall and a credit card company. We analyze which method performs better under which conditions. We compared classification accuracy of them which depends on structure and size of train set and increasing numbers of class. The experimental results indicate that Naive Bayesian learning performs better, while Centroid-Based Classification is more robust in terms of classification accuracy.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.183-193
• /
• 1999

In the previous study, a module-type vibration analysis system using modular approach is developed for the purpose of analyzing the torsional vibration of vehicle driveline. In the present paper, the system is utilized to investigate the torsional vibration of the driveline of a middle duty truck. The driveline with driving condition is modeled and the torsional vibration response is simulated. The resonance 45Hz is found at engine speed 900rpm and the resultant vibration is very high. It shows favorable agreements with reference data. The effects of parameter change on torsional vibration are also investigated, so it is clarified that clutch characteristics, axle shaft stiffness are very influential on reduction of vibratio. So the countermeasure is proposed for the clutch characteristics. The reduction of torsonal vibration by 8rad/sec is obtained.