• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.34-47
• /
• 2018

As interest in advanced countries regarding the convergence technology development increases, a methodology for identifying the core convergence technology that has a large spill-over effect on the technology and industry is required for the nation's competitiveness enhancement in the convergence technology field. Based on patent citation network analysis using 1,124 USPTO patents in the ICT convergence technology field of the smart factory, this study examined the proposed heterogeneous technology convergence index as a tool for measuring the convergence characteristics of the spillovers compared to other indexes (i.e. other sector ratio index and homogeneous technology convergence index). The proposed heterogeneous technology convergence index was used to investigate core technology sectors among ICT technology sectors of smart factory identified by government ministries. Results found 6 core ICT convergence technology sectors including the manufacturing execution analysis application sector. Also, this study conducted blockmodeling analysis using the IPC codes of patents in the manufacturing execution analysis application sector, and identified that the blocks representing the electronic communication and electric digital data processing technology sectors (Block 3 & 4) are related technology sectors which can be converged with core technology. Based on the findings, the implications for the convergence technology development planning of the smart factory field are discussed.

• Journal of the Korean Institute of Gas
• /
• v.25 no.2
• /
• pp.22-27
• /
• 2021

This paper is a purpose to study the failure examples for LPG vehicle. The first example, the researcher certified the incongruity phenomenon decreased engine power by ignition fire leakage because of spark plug threaded part damage assembling in cylinder head. The second example, the timing mark that accurately adjusting the camshaft and crankshaft position were twisted about 0.5 block each other. Finally, the researcher seeked the disharmony phenomenon as it couldn't set ignition timing. The third example, the researcher knew the failure phenomenon by interrupted the closing period for intake valve moving with air flow in the number 3 port of cylinder head as the foreign substance in cylinder head didn't remove. Therefore, the manager of a car has to thorough going inspect and the manufacture of a car must remove the cause of failure with quality assurance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1386-1391
• /
• 2004

It is known that an aircraft with delta-wings which are attached to the body at a large angle like a kite or a hang glider has a measure of maneuverability and stability. Aircrafts of this kind can fly stably. Even if engine trouble occurs, it will not fall and might be able to land. In this paper, one of the conventional control methods, PID control, is applied to the aircraft with LQ local control block. This is based on an idea that the aircraft flies so stably that the automatic control system might be realized by a simple controller. The proposed PID controller consists of several sub-controllers which are constructed to each system neglecting the interference. In addition, the LQ control is involved as a local loop of the aileron and rudder control in order to increase stability of the attitude when circling. The effectiveness of the proposed method is shown through 3D computer simulations and experiments of the flight path control.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.285-288
• /
• 2001

Hypereutectic Al-25Si-X alloys, expected to be applied to the cylinder-liner-part of the engine-block of an automobile due to the excellent wear resistance, low density and low thermal expansion coefficient has been fabricated through a spray forming process. The obtained microstructure of the hypereutectic Al-25Si-X alloy appeared to consist of Al matrix and equiaxed Si particles of average diameter of $5-7{\mu}m$. To characterize the deformation behavior of this alloy, a series of load relaxation and compression tests have been conducted at temperatures ranging from RT to $500^{\circ}C$. The strain rate sensitivity parameter (m) of this alloy has been found to be very low (0.1) below foot and reached 0.2 at $500^{\circ}C$. During the deformation above 300'c in compression, strain softening has been observed. The diagram of extrusion pressure vs. ram-speed has been constructed, providing the extrusion condition of Al-25Si-X alloys.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.37.2-38
• /
• 2015

According to the unified model of AGNs, type 1 and 2 AGNs are intrinsically the same objects but seem different due to an obscuring matter which can block lights from the central engine of the AGN depending on the viewing angle. The obscuring object is thought to be shaped in a toroidal form and thus the geometry of tori of AGNs is an important factor to determine the fraction of type 1 (or type 2) AGNs. Oh et al. (2015) provides a new catalog of type 1 AGNs from SDSS DR7 in the nearby universe (z < 0.2) and it contains nearly 50% more type 1 AGNs than previously known. Using this new catalog, we test the fraction of type 1 AGNs along the black hole mass (MBH) and the bolometric luminosity of AGNs (Lbol), which are regarded as key parameters of the AGNs. First of all, because the methods to derive the black hole mass and the bolometric luminosity bear uncertainties, we test how the different methods lead to different values of type 1 fraction. We found that the fraction of type 1 AGNs varies with both MBH and Lbol. The extensively-studied, "receding torus model" can only explain the trend along Lbol and hence fails to explain the trend. To understand the new trend, we test the geometry of the torus based on the "clumpy torus model". We present our results on the basic properties of the torus such as a column density or opening angle and compare with those from previous studies based on other wavelengths (e.g. Infrared or X-ray).

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1299-1302
• /
• 2004

A real object duplication system (RODS), including three dimensional (3D) scanner and solid freeform fabrication system (SFFS), is a device to make three-dimensional objects directly from the drawing or photo data. A Selective Multi-Laser Sintering (SMLS) process designed in this paper is by which computer images received using 3D scanner are built up from polymer powder on building room of large size using dual laser at industrial type SFF system. Using the process can rapidly produce real object duplication components of industrial type such as cylinder, engine block, chassis of automobile, etc. In this paper, the industrial type SFF system using SMLS process is manufactured and the system is satisfied with high precision and high speed processing technique. To research characteristics of each part for theindustrial type SFF system, a structure and thermal analysis and test of each part is carried out. Also, to achievement of high performance for industrial type SFF system, design and fabrication for the structure, heater, nitrogen supply, laser and control part are carried out.

• Tribology and Lubricants
• /
• v.23 no.4
• /
• pp.170-174
• /
• 2007

Wear and scuffing tests were conducted using friction and wear measurement of piston rings and cylinder blocks in low friction diesel engine. The frictional forces, wear amounts and cycles to scuffing in boundary lubricated sliding condition were measured using the reciprocating wear tester. The cylinder blocks were used as reciprocating specimens, and the piston rings with several coatings were used as fixed pin. Several coatings were used such as DLC, TiN, Cr-ceramic and TiAlN in order to improve the tribological characteristics. From the tests wear volume of piston ring surfaces applied various coatings were compared. During the tests coefficients of friction were monitored. Test results showed that DLC coatings showed good tribological properties. TiN and Cr-ceramic coated rings showed good wear resistance properties but produced high friction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.05a
• /
• pp.20-23
• /
• 2001

Hypereutectic Al-25Si alloy, which is expected to be applied to the cylinder-liner-part of the engine-block of an automobile due to its excellent wear resistance, low density and low thermal expansion coefficient, has been fabricated through a spray forming process. The obtained microstructure of the hypereutectic Al-25Si alloy appeared to consist of Al matrix and equiaxed Si particles of average diameter of 5-7 mm. To characterize the deformation behavior of this alloy, a series of load relaxation and compression tests have been conducted at temperatures ranging from RT to $500^{\circ}C$. The strain rate sensitivity parameter (m) of this alloy has been found to be very low (0.1) below $400^{\circ}C$ and reached maximum value of about 0.2 at $500^{\circ}C$. During the deformation above $300^{\circ}C$ in compression, strain softening has been observed. The diagram of extrusion pressure vs. ram-speed has been constructed. The extrusion has been successfully conducted at the temperatures of $300^{\circ}C$ and above with the ratio of area reduction of 28 and 40 in this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.4
• /
• pp.59-66
• /
• 2007

In this paper, experimental investigation results of the effect of partial admission ratio on the performance of axial turbine was presented. A supersonic impulse turbine of gas generator cycle liquid rocket engine turbopump was used for the test. for experimental purpose, a nozzle block, in which total 14 number of axi-symmetric convergent-divergent nozzles are arranged circumferentially, was designed and manufactured. Partial admission ratio was controlled by changing the number of active nozzles. High pressure air was used as working medium for the test. The experimental result revealed that the performance of the supersonic impulse turbine does not much affected by the partial admission ratio for supersonic impulse turbine.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1998.10a
• /
• pp.407-410
• /
• 1998

Configuration is a set of building block processes, a series of selection and combining parts or components which composes a whole thing. A whole thing could be such a configurable object as manufacturing product, network system, financial portfolio, system development plan, project team, etc. Configuration problem could happen during any phase of product life cycle: design, production, sales, installation, and maintenance. Configuration has long been one of cost and time consuming work, because only high salaried technical experts on product and components can do configuration. Rework for error adjustments of configurations at later process causes far much cost and time, so accurate configuration is required. Under the on-line electronic commerce environment, configuration problem solving becomes more important, because component-based sales should be done automatically on the merchant web site. Automated product search, order placement, order fulfillment and payment make that manual configuration is no longer feasible. Automated configuration means that all the constraints among components should be checked and confirmed by configuration engine automatically. In addition, technical constraints and customer preferences like price range and a specific function required should be considered. This paper gives an brief overview of configuration problems: characteristics, representation paradigms, and solving algorithms and introduce CRSP(Constraint and Rule Satisfaction Problem) method. CRSP method adopts both constraint and rule for configuration domain knowledge representation. A survey and analysis on web sites adopting configuration functions are provided. Future directions of configuration for EC is discussed in the three aspects: methodology itself, companies adopting configuration function, and electronic commerce industry.