• Journal of Ocean Engineering and Technology
• /
• v.34 no.3
• /
• pp.217-226
• /
• 2020

An offshore plant is an offshore platform that can process oil and gas resources in rough seas with a poor working environment. Moreover, it is a complex structure with different types of offshore facilities and a large amount of outfitting that connects different offshore installations. In particular, an enormous amount of various piping materials is installed in a relatively narrow space, and thus, the difficulty of working is relatively high compared to working in ships or ground plants. Generally, when the 3D detailed design is completed, an offshore plant piping process is carried out at the shipyard with ISO 2D fabrication drawings and ISO 2D installation drawings. If a worker wants to understand the three-dimensional piping composition in the working area, he can only use three-dimensional viewers that provide limited functionality. As offshore plant construction progresses, correlating work with predecessors becomes more complicated and rework occurs because of frequent design changes. This viewer function makes it difficult to identify the 3D piping structure of the urgently needed part. This study deals with the process support method based on a system using a 3D simulator to improve the efficiency of the piping process. The 3D simulator is based on the Unity3D engine and can be simulated by considering the classification and priority of 3D models by the piping process in the system. Further, it makes it possible to visualize progress information of the process. In addition, the punch content can be displayed on the 3D model after the pipe inspection. Finally, in supporting the data in relation to the piping process, it is considered that 3D-simulator-supported piping installing could improve the work efficiency by more than 99% compared to the existing method.

• Journal of Aerospace System Engineering
• /
• v.16 no.5
• /
• pp.78-85
• /
• 2022

Multicopter-type unmanned aerial vehicles (UAV) are increasingly for cargo transportation to mountainous and island regions, image information acquisition in disaster areas, and emergency rescue transport. In order to successfully perform these tasks, the aircraft structure must be able to safely support the loads induced by flight conditions while ensuring the vibration and aeroelastic stability of the prop-rotor. This study introduced a structural analysis model of a 40kg payload multicopter with an engine-generator hybrid power system. The deformation and stress distribution are investigated depending on the load conditions. In addition, the vibration characteristics and aeroelastic stability of the prop-rotor were also presented to flight speed and aircraft pitch angle. The maximum thrust generated by the prop-rotor and the landing load applied to the multicopter under normal and emergency landing conditions were reviewed., It confirmed that the structure could support without failure. In addition, it confirmed that the damping characteristics of each primary locate in the constant region according to the aircraft's flight speed and the prop-rotors rotating speed.

• Journal of Internet Computing and Services
• /
• v.16 no.6
• /
• pp.69-78
• /
• 2015

Recently, research on the multi-agent system is developed actively in the various fields, especially on the control of complex system and optimization. In this study, we develop a multi-agent system for NPC simulation in game environment. The purpose of the development is to support quick and precise decision by inferencing the situation of the dynamic discrete domain, and to support an optimization process of the agent system. Our approach employed Petri-net as a basic agent model to simplify structure of the system, and used fuzzy inference engine to support decision making in various situation. Our experimentation describes situation of the virtual battlefield between the NPCs, which are divided two groups, such as fuzzy rule based agent and automata based agent. We calculate the percentage of winning and survival rate from the several simulations, and the result describes that the fuzzy rule based agent showed better performance than the automata based agent.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.163-164
• /
• 2013

Two-Way CAR-FERRY land and islands, islands to islands, the connection between sustainable marine transportation in conjunction with the increasing demand of tourists, according to the associated coastal maritime tourism and passenger transport has a role. Subsequent Two-Way CAR-FERRY and the increased ease of use due to berthing maritime accidents can be reduced. Two-Way CAR-FERRY as the draft (even) in the state on both sides of the propeller, because the propeller due to the small diameter, low speed forward flight by the reaction at the shaft and propeller damage can occur. Engine output accordingly, linear and torsional vibration reducer by, elastic coupling selection transverse vibration and shaft alignment (Shaft alignment) considering the shaft design (bearing size, width, thickness) and the primary drive shaft support portion of the hull structure of evaluated for quality.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.10
• /
• pp.1-10
• /
• 2009

Precise branch predictor has a profound impact on system performance in modern processor architectures. Recent works show that prediction latency as well as prediction accuracy has a critical impact on overall system performance as well. However, prediction latency tends to be overlooked. In this paper, we propose Branch Pre-Prediction policy to tolerate branch prediction latency. The proposed solution allows that branch predictor can proceed its prediction without any information from the fetch engine, separating the prediction engine from fetch stage. In addition, we propose newly modified BTE structure to support our solution. The simulation result shows that proposed solution can hide most prediction latency with still providing the same level of prediction accuracy. Furthermore, the proposed solution shows even better performance than the ideal case, that is the predictor which always takes a single cycle prediction latency. In our experiments, IPC improvement is up to 11.92% and 5.15% in average, compared to conventional predictor system.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.183-186
• /
• 2005

We present results of the VLBA observation toward the radio continuum and water maser emissions in a nearby LINER galaxy NGC 1052. The jet structure observed in 2000 is similar to that in 1998, and the two jet structures in 1998 and 2000 support the sub-luminal motion with apparent velocity of 0.26c. Distribution of water maser spots are located ${\~}$0.05 pc shifted to southwest from the component which is supported to be the nucleus, and no rapid positional change of the water maser gas with respect to the central engine is seen from 1995 to 2000. The maser gas is positionally coincident with a plasma torus, and the position of the maser gas relative to the nucleus is stable from 1995 to 2000. The maser gas in NGC 1052 could be explained to be associated with the nuclear circumnuclear torus or disk like the situation found in the nucleus of NGC 4258.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11b
• /
• pp.208-211
• /
• 2005

This paper describes the development process of steering system for reduce idle vibration through the data level of frequency and sensitivity. High stiffness and light weight vehicle is a major target in the refinement of passenger cars to meet customers' contradictable requirements between NVH performance and fuel economy. The target frequency of the steering system is set by benchmarking of a competitive vehicle and the vibration mode map is used to separate steering column modes from resonance of body structure and engine idle rpm. This paper descirbes the analysis approach process for high stiffness of steering system and the design guideline is suggested about steering column and support system by using mother car at initial design stage. We used a patent map in order to analyze accurately a technical trend and suggested the design process using dynamic damper of steering system considering sensitivity. And we established techniques of analysis on steering system and evaluated the level of accuracy of analysis through correlating the test and analysis results. It makes possible to design the good NVH performance vehicle at initial design stage and save vehicles to be used in tests. These improvements can lead to shortening the time needed to develop better vehicles.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.3
• /
• pp.34-39
• /
• 2008

In this study, CFRP(Carbon Fiber Reinforced Plastics) that has high specific strength and elastic modulus and low thermal strain was used as a material for the lightweight structural member. CFRP is a fiber material as anisotropic material. The anisotropic material is characterized by the change of its mechanical properties according to stacking orientation angle. CFRP orientation angle was oriented in [A/B]s in order to examine the effect of CFRP orientation angle on the characteristics of energy absorption. CFRP is very weak to the impact from the outside. So, when impact is applied to CFRP, its strength is rapidly lowered. The hybrid material was manufactured by combining CFRP to aluminum which is lightweight and widely used for structural members of the automobile. The hybrid member was shaped as a side member that could support the automobile engine and mount and absorb a large amount of impact energy at the front-end in case of automobile collision. The bending test device was manufactured in accordance with ASTM standard, and mounted to UTM for bending test. For comparing bending characteristics of the hybrid member with those of Aluminum and CFRP member, tests were performed for aluminum, CFRP and hybrid member, respectively.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.3
• /
• pp.103-112
• /
• 1998

In this study, database schema which is capable of maintaining various design-knowledge and applicable to the structural designs has been presented. Futhermore, by utilizing the database system, RECODSS (REinforced COncrete Design Support System) was developed as well. Knowledge-base that were formulated from the document is constructed by applying the concrete standard specifications of Korea from 1989. The basic drawing was prepared by $AutoCAD^TM$. As an inference in the preliminary design, the certainty function and the interpolation function were presented. The certainty function is made by assuming linear relations between each data while referencing $MYCIN^TM$ (expert systems). Nevertheless, the interpolation function was made by utilizing the linear Lagrange interpolation. For the search of the design-knowledge, fast search algorithm and full-text search algorithm were used, however, the design engine was programmed with C language. RECODSS was applied for designing a slab and a beam member. And the results were compared with the existing results. In conclusion, RECODSS was able to efficiently manage various design knowledge and to introduce stable design results.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.34-42
• /
• 2009

HAO is a ORB engine to support the logic-based CORBA component developments in FPGA. In this papers, in order to give the interoperability between general CORBA and HAO, we propose newly the specialization of GIOP(General Inter-ORB Protocol) from consideration of FPGA. It compose of the two major capability. First, it can abstract the hardware structure from the various system board environments. Secondly, also it is possible to minimize the monopoly occupation for shared resource such as system bus, external memory.