• 해양환경안전학회지
• /
• 제27권7호
• /
• pp.1067-1073
• /
• 2021

선박으로부터 발생하는 온실가스 배출을 저감하기 위한 규제가 점차 강화되고 있다. 현존선에서도 EEXI(Energy Efficiency Existing Index)가 도입되었으며 이와 같은 온실가스 배출 감축목표를 달성하기 위해 다양한 연구가 진행되고 있다. 본 연구에서는 국제항해에 종사하는 현존선 중 자동차운반선에 태양광 발전시스템을 적용하여 연료유 사용량을 줄임으로써 온실가스 배출이 저감될 수 있는 시스템을 제안하였다. 제안된 태양광 발전시스템은 태양광 모듈, 에너지저장시스템, 전력변환장치 등으로 구성되었으며, 본 시스템의 적용 가능성을 확인하기 위해 전력전자프로그램을 통해 시스템을 모델링하였으며, 시뮬레이션을 실시하였다. 또한, 실제 선박에 적용하기 위한 타당성 검증을 위해 경제성 분석을 실시하였으며, 약 11년 이후 경제성 부분에서도 유의미한 결과가 도출됨을 확인할 수 있었다.

• 한국콘텐츠학회논문지
• /
• 제7권6호
• /
• pp.69-78
• /
• 2007

오늘날의 내장형 이동 시스템은 MP3플레이어나 디지털 캠코더와 같이 하나의 기능만을 지원했던 단일 응용프로그램 시스템에서 PMP(Portable Multimedia Player), PDA(Personal Digital Assistants)와 같이 MPEG, W3플레이어, 전자사전, DMB(Digital Multimedia Broadcasting), 게임, 통신 기능 등을 모두 포함하는 하나의 디지털 컨버전스 기기로 변화해가고 있다. 이러한 변화는 CPU 성능 향상과 메모리, 저장장치의 증가, LCD의 크기 증가와 같은 하드웨어적인 요구사항의 증가로 이어졌고, 이로 인해 단말기에서 소모하는 전력이 그에 비례하여 증가하였다. 소모 전력의 증가에 따른 배터리 용량의 증가는 더딘 상황이며, 이를 해결하기 위해 소프트웨어적으로 소모 전력을 감축시키는 연구들이 많이 진행되고 있다. 본 논문에서는 소모 전력 감축 기법이 적용된 실시간 운영체제 UbiFOSTM을 ARM9계열의 MBA2440에 탑재하였다. 전력 감축 기법으로 시스템 작업량 관찰에 기반한 동적 전력 관리 기법과 장치 전력 관리기법을 적용하였다. 본 논문의 저전력 기법을 통해 작업량에 따라 24% 이상의 소모 전력 감축효과가 있음을 확인하였다.

• 디지털융복합연구
• /
• 제17권10호
• /
• pp.223-232
• /
• 2019

정보통신 산업 발전에 따라 통신장치의 크기는 소형화 되고 발열량이 많이 발생하는 시스템으로 변화하고 있다. 그러므로 무선기지국에는 무선장비의 발열량이 많이 발생하여 에너지가 계속 많이 소모되고 있고 그로 인하여 무선기지국의 장애가 발생 할 우려가 있어 본 연구에서는 효율적이고 효과적인 방법으로 무선기지국내 에너지를 절감하고 기지국운영을 위하여 본 연구를 분석하게 되었다. 연구방법으로는 발열량 및 전기료를 많이 발생하는 기지국 대상으로 실시하였고 기지국 25개를 선정하여 2주간 데이터를 확보 하였다. 신뢰성을 확보하기 위해 실내 온도를 일정하게 $27^{\circ}C$로 유지 하였으며, 제어시스템을 설치하여 2주간 똑 같이 설치하여 date를 분석 확보 하였다. 연구방법에 있어 시험결과를 산출하기 위해 계측기는 전산전력계, 디지털온도계, 분진측정 등이 활용하였다. date분석을 위해 Control Sysetm 설치 전 date와 설치 후 date 분석을 위해 25개 무선기지국대상으로 연구 시험 하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.302-317
• /
• 2017

This paper proposes a new full adder design based on pass-transistor logic that offers ultra-low power dissipation and superior variability together with low transistor count. The pass-transistor logic allows device count reduction through direct logic realization, and thus leads to reduction in the node capacitances as well as short-circuit currents due to the absence of supply rails. Optimum transistor sizing alleviates the adverse effects of process variations on performance metrics. The design is subjected to a comparative analysis against existing designs based on Monte Carlo simulations in a SPICE environment, using the 22-nm CMOS Predictive Technology Model (PTM). The proposed ULP adder offers 38% improvement in power in comparison to the best performing conventional designs. The trade-off in delay to achieve this power saving is estimated through the power-delay product (PDP), which is found to be competitive to conventional values. It also offers upto 79% improvement in variability in comparison to conventional designs, and provides suitable scalability in supply voltage to meet future demands of energy-efficiency in portable applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.401-401
• /
• 2009

Recently, demands for the development of compact, lightweight power supplies with higher power density and higher efficiency have been increased. Since Piezoelectric Transformer (PT) was emerged in device and material industry, it has been suggested as a viable alternative to the magnetic transformer in some applications. PT has some advantages such as low profile and mechanical energy transfer with little electromagnetic interface (EMI). Also, PT can provide high voltage stepping ratio with good isolation and requires no copper windings saving copper usage especially for large voltage conversion differences. Conventional control of PT converter has mainly two-way. One is the pulse frequency modulation (PFM) control method and the other is the pulse width modulation (PWM) control with frequency fixed method. It is known that the maximum PT efficiency can be obtained when it operates near the resonant frequency of the PT. And, also PT's resonant frequency moves according to the load condition. Therefore, selection of PT converter control method is very difficult. This paper analyzes general piezo-electric converter modeling and proposes a guide-line to selection of control method and stabilization control.

• 대한조선학회논문집
• /
• 제54권1호
• /
• pp.10-17
• /
• 2017

This paper deals with a comparison of performance between tip rake propeller and normal propeller in P.O.W condition. In comparison with normal propeller, tip rake propeller is good at preventing occurring negative effect: tip vortex, etc. But, officially formulated information about tip rake propeller doesn't become known. So this paper makes design variables about rake factors and applies them to propeller geometry. And propellers applied design variables are compared with each other about open water propeller efficiency. Also this paper confirms a vorticity reduction at propeller tip.

• 수산해양기술연구
• /
• 제49권2호
• /
• pp.126-135
• /
• 2013

This study was performed to have an effect on control the growth of algae such as "Actinastrum fluviatile" which occurs frequently in the aquaculture tank using by a cold plasma, and it also would be expected to promote the growth of water plants due to active element causing OH radicals in the water. In addition, it was verified on the death rate as 99.9% on the scale protrusion of "Aeromonas hydrophila" as well as E. coli, especially, under extreme conditions more than 100 million pathogenic bacterium in the aqua pet tank, the ornamental fish had to act in a safe and healthy environment at over 98% death rate within 48 hours. It has been proven to give no affect on aerobic bacteria that exist in the filter or soil because there was no residual toxicity in the water tank. As the results, it will help to develop and apply on the sterilization device in other industries as well as aquarium organisms due to adopted energy-saving algorithm and reliability in use.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권2호
• /
• pp.924-944
• /
• 2017

Telecare Medical Information System (TMIS) helps the patients to gain the health monitoring information at home and access medical services over the mobile Internet. In 2015, Das et al proposed a secure and robust user AKA scheme for hierarchical multi-medical server environment in TMIS, referred to as DAKA protocol, and claimed that their protocol is against all possible attacks. In this paper, we first analyze and show DAKA protocol is vulnerable to internal attacks, impersonation attacks and stolen smart card attack. Furthermore, DAKA protocol also cannot provide confidentiality. We then propose a lightweight pseudonym AKA protocol for multi-medical server architecture in TMIS (short for PAKA). Our PAKA protocol not only keeps good security features declared by DAKA protocol, but also truly provides patient's anonymity by using pseudonym to protect sensitive information from illegal interception. Besides, our PAKA protocol can realize authentication and key agreement with energy-saving, extremely low computation cost, communication cost and fewer storage resources in smart card, medical servers and physical servers. What's more, the PAKA protocol is proved secure against known possible attacks by using Burrows-Abadi-Needham (BAN) logic. As a result, these features make PAKA protocol is very suitable for computation-limited mobile device.

• Journal of Biosystems Engineering
• /
• 제36권3호
• /
• pp.171-179
• /
• 2011

Facing the current hikes of labor wage and high oil price, it is needed to have energy-saving machinery which also enables us precise farm operations. Thus, it was necessary to develop a safe machine which allows secure and pleasant works along orchard slopes. In this study, a lifting utility with balance-controlled platform was developed. The platform utility could maintain to level the workbench while driving along slopes. Even the machine body was driven at the tilt angle ranges of ${\pm}20^{\circ}$, the platform bench could be maintained within ${\pm}0.5^{\circ}$ of a gimbal angle. In addition, the machine lifted up to 2.0 m using an electric-hybrid driving mechanism with a low noise. A tandem hybrid power source was developed with a DC 72 V, 100 AH for the Deep-Cycle batteries, charged with 3.5 kW gasoline generator as an auxiliary power source. HST, which is one of the CVT's, was adopted as a transmission device, and a crawer track was used for the safety of the vehicle against tip-over. The maximum lifting height of platform was is 2,500 mm, and the maximum extendable width was 2,900 mm.

• 해양환경안전학회지
• /
• 제16권2호
• /
• pp.235-240
• /
• 2010

백열전구를 대체하기위한 친환경 에너지 절약형 7w급 LED 램프의 구동을 위한 전원장치를 설계하였다. LED 램프는 칩 LED를 여러개 직 병렬로 연결하여 사용하게 되므로 적합한 직류 전압과 전류를 공급하여야 한다. 그런데 LED 램프는 상용 AC 220V 전원에 직접 연결해 사용하게 되므로 드라이버에는 전압제어와 전류제어가 포함된 AC/DC, DC/DC 전력변환기가 반드시 필요하게 된다. 따라서 본 논문에서는 램프의 LED 열에 따라 출력전압과 전류제어가 가능하며 변압기가 없는 간단한 구조의 LED 램프 드라이버를 설계하였다.