• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.219-225
• /
• 2022

The textile industry in Korea, the dyeing sector is an energy-intensive sector and has low per-unit productivity due to its labor-intensive nature. If the defective rate of dyed fabrics is high, additional costs are incurred due to an increase in production cost due to re-dyeing. Therefore, the goal of the dyeing factory was to minimize the defect rate rather than to save energy. It was difficult to check the dyeing state of the fabric in real time due to the risk of accidents due to burns or pressure when dyeing in a high-temperature and high-pressure environment. In this paper, a complex sensor that can measure the exhaustion rate of dye solution in the dyeing machine using turbidity, pH, and conductivity sensors was proposed, and the experimental method and experimental results were analyzed.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.6_3
• /
• pp.1135-1145
• /
• 2022

Due to increase in concerns related to the climate change, state-wide promotion of the carbon neutrality has been in progress thus far. Smart City could be one of the measures as the initiative to mitigate the missions process. The primary purpose of Smart City can be summarized to be maximization of the social net-beneift to be returned for the local citizens and derivation of the optimal pattern of the energy consumption could belong to one of the elements included in the net-benefit. Currently, the energy consumption by the buildings has been determined to be responsible for the greatest consumption among the sectors considered to be energy-intensive. Moreover, considering the fact that the consumption by operations of HVAC is responsible for nearly 40% in the commercial buildings, it is virtually not possible to optimize schedules for the energy consumption with considerable deliverables from the perspective of the urban planners. Thus, the methods to implement the optimal schedules for the HVAC commissioned with the OHUs were concluded to be the suitable candidate resources for the simulation by EnergyPlus capable of monitoring the thermal changes in each subject space in the present research.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.53-60
• /
• 2002

Marine biotechnology is one of the promising frontier of scientific exploration and commercial utilization for the next century. Compared with the terrestrial environment, the oceans of the world remain largely unexplored and include a major portion of bio-resources. Using the tools of biotechnology, the vast and diverse marine resources can be applied to produce new products and foods. Marine biotechnology has the characteristics of pro-environment, saying energy, and intensive knowledge. Therefore, we can take advantage of the marine biotechnology industry under our situation with the poor natural resources. The study focuses on the current status and administrative supports on marine biotechnology industry for upgrading the economic value of output. The status of our marine biotechnology industry is beginning stage in the economic aspects. Manpower and the level of most technologies are weaker than the ones of the advanced countries. More investment and recruiting skilled specialists are necessary because the improvement of marine biotechnology is depend on the technology and scientists. This study suggests the ways of administrative supports for domestic marine biotechnology: Efficient information network and supporting system for the development of marine biotechnology should be interrelated with other technical and scientific fields; The government should provide sustainable fund for the long-term research project and the infrastructure in the marine biotechnology.

• Journal of Plant Biotechnology
• /
• v.5 no.2
• /
• pp.69-77
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd. of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialization of these products are summarized. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2003.04a
• /
• pp.39-48
• /
• 2003

The ornamental industry encompasses cut flower, pot plant, turfgrass and nursery stock production and is an important part of the agricultural sector. As internationally traded commodities, cut flowers and plants are an integral part of the economy of a number of developing countries in South America, the Caribbean and Africa. Genetic modification (GM) is a tool with great potential to the ornamental horticulture industry. The rapid progress in our knowledge of plant molecular biology can accelerate the breeding ornamental plants using recombinant DNA technology techniques. Not only is there the possibility of creating new, novel products the driver of the industry but also the potential to develop varieties requiring less chemical and energy inputs. As an important non-food agricultural sector the use of genetically modified (GM) ornamental crops may also be ideal for the intensive farming necessary to generate pharmaceuticals and other useful products in GM plants. To date, there are only a few ornamental GM products in development and only one, a carnation genetically modified for flower colour, in the marketplace. International Flower Developments, a joint venture between Florigene Ltd. in Australia and Suntory Ltd.of Japan, developed the GM carnations. These flowers are currently on sale in USA, Japan and Australia. The research, development and commercialisation of these products are summarised. The long term prospects for ornamental GM products, like food crops, will be determined by the regulatory environment, and the acceptance of GM products in the marketplace. These critical factors will be analysed in the context of the current legislative environment, and likely public and industry opinion towards ornamental genetically modified organisms (GMO's).

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.499-520
• /
• 2020

Input ratio of electricity to other production inputs in the Korean manufacturing sector has been higher than for the other OECD countries. In addition, electricity prices in Korea has been relatively lower than the average of OECD countries. Moreover, electricity sector is responsible for most CO2 emissions in Korea as coal and natural gas account 41.9% and 26.8% of electricity production as of 2018. Therefore, it looks inevitable to raise the electricity tariff for the manufacturing sector in Korea, but there is a concern that increase in the electricity tariff might affect small and medium enterprises (SMEs) more than large firms. This study estimates electricity demand's price and output elasticities for large firms and SMEs in steel industry by employing a time varying parameter model (Kalman filter). The analysis shows that changes in output levels regardless of firms' size affect electricity demands more significantly than do changes in electricity prices. Second, large firms have higher variances for both price and output elasticities of electricity demand. Third, large firms have higher price elasticity but lower output elasticity of electricity demand relative to SMEs. Policy implications are suggested in association with how to reduce electricity demands in the energy-intensive industry.

• Clean Technology
• /
• v.28 no.3
• /
• pp.258-266
• /
• 2022

Resource productivity (GDP/DMC) is defined as GDP divided by DMC. However, it has shortcomings when estimating the value-added generated from material processing. In this paper, an energy coefficient is applied to GDP to develop a sub-indicator (referred to as GDPe/DMC). Consequently, South Korea, which is a secondary industry-oriented country, created 1,094.60 USD/ton from input materials and was ranked 4th on the OECD list, which is 10 levels higher than the level estimated by GDP/DMC. However, Luxembourg, which is a tertiary industry-oriented country, is ranked 16th on the OECD list, which is 12 levels lower than the level estimated by GDP/DMC. The resource productivity estimated by the sub-indicator (GDPe/DMC) developed in this study indicates that secondary industry-oriented countries are undervalued in the existing main GDP/DMC calculation. On the other hand, tertiary industry-oriented countries are downgraded due to the industrial features of the GDPe/DMC calculation. As a result of this paper, GDPe/DMC could be considered a more reasonable indicator to directly reflect the material input effect compared to the existing main indicator, GDP/DMC. This means that GDPe/DMC-induced resource productivities could be estimated to be slightly higher than the GDP/DMC-induced resource productivities for secondary industry-oriented countries. It is expected that the sub-indicator, GDPe/DMC, proposed in this study could be useful especially for comparing and analyzing the resource productivities between countries that have different industry structures. This study intended to consider a structurally energy/resource-intensive industry in estimating and analyzing national-level resource productivity. Thus, the sub-indicator, GDPe/DMC, may help minimize the distortion of interpreting national resource productivities in various situations, and be utilized as a more efficient tool when used together with GDP/DMC.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.1-10
• /
• 2011

Beating or refining is an energy intensive process in paper industry. In India, most of the paper industries blend long fibered softwood pulps with short fibered hardwood or agro based pulps to get the paper properties of competitive level. Refining characteristics of the blend of pulps is very crucial with respect to freeness and strength properties. This study has been carried out to understand the refining behavior of three hardwood pulps and a softwood pulp. The hardwood and softwood pulps are blended in different proportions in two different ways; a) blending after their separate refining, and b) blending before refining followed by mixed refining of the blended pulps. Freeness of pulp, strength, optical and surface properties of paper along with formation have been determined and compared for both the refining methods. The fiber classification of refined pulps was also carried out to analyze the effect of refining method on fiber morphology. The mixed refining of hardwood and softwood pulps marginally affects the fiber morphology in comparison to separate refining of pulps. The strength and other properties of paper prepared from mixed refining of pulps are either better or comparable than those of separately refined pulps.

• New & Renewable Energy
• /
• v.18 no.3
• /
• pp.10-22
• /
• 2022

Forest biomass energy is based on scientific evidence in response to carbon neutrality and the climate crisis, international consensus, and environmental-geographic characteristics of each nation. In this study, the authors aimed to analyze macroscopic forest biomass energy policies for ten major countries. They categorized them into six detailed categories (Sustainable utilization, Cascading Uutilization, Replacement of fossil fuel/Carbon intensive products, Utilization of forest by-products/residues as the source of energy, Contribution to carbon-neutral/climate change, and Biomass combined with CCS/CCUS ). In addition, the surveyed nations have developed a policy consensus on the active use of forest biomass with sustainable forest management except for the cascading utilization category. Furthermore, the authors evaluated the mid to long-term plans of the Korean government for improvements in the policy and legal aspects. As a result, the authors derived four major directions that South Korea should approach strategically in the future (1) secure financial resources for sustainable forest management and stimulating investment in the timber industry, (2) promote unified policies to establish a bio-economy, (3) enhancement of the forest biomass energy system, and (4) reorganization and promotion of strategy centered on the opinions of field experts in internal and external instability.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.370-374
• /
• 2022

Construction is a labor-intensive industry that heavily relies on skilled construction workers. However, the aging of the workforce is rapidly growing, and the shortage of skilled workers is intensifying. The application of construction robotics technology can solve the problem of workforce shortage and guarantee construction productivity, safety, and quality improvement. This study presents a framework of the functional analysis for construction processes and work tasks that classifies and analyzes processes and work tasks for construction robotics design. The framework presents the functional analysis process, which analyzes workers' attributes and identifies functions of construction robotics.