• Journal of Electrical Engineering and Technology
• /
• v.9 no.5
• /
• pp.1643-1653
• /
• 2014

This paper presents the design and implementation of a wind-solar hybrid power system for LED street lighting and an isolated power system. The proposed system consists of photovoltaic modules, a wind generator, a storage system (battery), LED lighting, and the controller, which can manage the power and system operation. This controller has the functions of maximum power point tracking (MPPT) for the wind and solar power, effective charging/discharging for the storage system, LED dimming control for saving energy, and remote data logging for monitoring the performance and maintenance. The proposed system was analyzed in regard to the operation status of the hybrid input power and the battery voltage using a PSIM simulation. In addition, the characteristics of the proposed system's output were analyzed through experimental verification. A prototype was also developed which uses 300[W] of wind power, 200[W] of solar power, 60[W] LED lighting, and a 24[V]/80[Ah] battery. The control system principles and design scheme of the hardware and software are presented.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.6
• /
• pp.87-95
• /
• 2006

In this study, in order to obtain high qualify of electric power, single phase active filter which is composed of Zig-Zag transformer and three phase bridge rectifier and capacitor at the secondary of its transformer to be able to reduce the components of the zero phase current and the third harmonic current in neutral line and power line respectively. By connecting this filter to the Zig-Zag transformer and nonlinear load, their third harmonic components due to the nonlinear loads were reduced.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.56-61
• /
• 2001

In this work, the surface treatment of aluminum/composites (graphite-epoxy composites) was investigated. The surface of composites was treated by $Ar^{+}$ ion beam under oxygen environment. The surface of aluminum was treated by DC plasma. The optimal condition of surface treatment for the composites was determined by measuring the contact angle as a function of ion dose. The optimal treatment condition of the aluminum was determined by measuring the contact angle and T-peel strength as a function of mixture ratio of acetylene gas to nitrogen gas. The mixture ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The results showed that the contact angle of composites decreased from$ 81^{\circ}$ to $8^{\circ}$ as the ion dose increased from zero to $1$\times$10^{17}$ions/$\textrm{cm}^2$. The optimal condition of ion dose was $1$\times$10^{16}$ions/$\textrm{cm}^2$. The results also showed that the contact angle of aluminum was a minimum for the mixture ratio of 5:5. Similarly, the T-peel strength was a maximum for the mixture ratio of 5:5, which indicates that the optimal condition of mixture ratio of acetylene gas to nitrogen gas is 5:5.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• Korean Journal of Materials Research
• /
• v.27 no.6
• /
• pp.301-306
• /
• 2017

The discovery of new luminescent materials for use in light-emitting diodes(LEDs) has been of great interest, since LED-based solid state lighting applications are attracting a lot of attention in the energy saving and environmental fields. Recent research trends have centered on the discovery of new luminescent materials rather than on fine changes in well-known luminescent materials. In a sense, the novelty of our study beyond simple modification or improvement of existing phosphors. A good strategy for the discovery of new fluorescent materials is to introduce activators that are appropriate for conventional inorganic compounds, that have well-defined structures in the crystal structure database, but have not been considered as phosphor hosts. Another strategy is to discover new host compounds with structures that cannot be found in any existing databases. We have pursued these two strategies at the same time using composite search technology with particle swarm optimization(PSO). In this study, using PSO, we have tracked down a search space composed of Sr-Al-Si-O-N and have discovered a new phosphor structure with yellow luminescence; this material is a potential candidate for UV-LED applications.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.44-54
• /
• 2013

Replacing OMG (old magazine) to ONP (old newspaper) by raising optical property through $CaCO_3$ in-situ precipitation method in white duplex board presents cost reduction and possible drying energy saving. The strength property impairment by the presence of $CaCO_3$ could be supplemented by the fiber furnish treatment or strength polymer addition. In $CaCO_3$ in-situ precipitation of ONP, it was found from morphological study using FlowCAM, an image analyzer, that most of calcium carbonate were formed on the fines, and made the size of the fines larger. For the case of forming calcium carbonate only on the fractionated fines, the size of the fines were the biggest, and there were more clean surface areas available for bonding for the fractionated long fibers when fractionated fibers and fines were regrouped to make paper.

• Membrane Journal
• /
• v.8 no.2
• /
• pp.69-76
• /
• 1998

Membrane technologies have been used frequently in industries, taking advantage of that it is energy-saving and employable in relatively large scale. The fact that a non-mass separating agent is used in mild conditions without phase change in membrane separation makes it a method of choice in the recovery of biological materials. Recently, the development of noble separating modules has been solving the inherent problems in membrane separation, the fouling and the concentration polarization. In addition, membrane separation has broadened its applications from the conventional crude separation to the purificational use by the advent of the new and functional membrane materials. The role of membrane technologies is expected to be enormous in the production and recovery of biological products, considering the excellent applicability of membrane in the fields of integrated separation and in-situ separation, the two trends in modem bioseparation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2019.05a
• /
• pp.458-460
• /
• 2019

최근 클라우드 시스템 환경이 점차 늘어남에 따라 데이터 센터(IDC) 구축이 점차 늘어나가고 있다. 데이터 센터는 최근 부각하고 있는 4 차 산업 영역에서 사물 인터넷(IoT), 자율주행차 등 에서 처리될 대용량 데이터로 인한 이를 처리하는 중요한 역할을 담당하고 있다. 데이터센터 운영에는 대량의 에너지가 필요하다. 수 많은 컴퓨터에서 발생하는 열에너지를 처리하기 위하여 대량의 전력 냉방 에너지를 소비하고 있다. 냉방 공조 운영은 데이터 센터 운영에 중요한 역할을 한다. 이유는 많은 컴퓨터를 가동하는 비용보다 부대 시설로 운영되는 냉방 에너지를 보다 많이 소비하는 현상까지 발생하고 있다. 이에 최근 데이터 센터 냉방 공조 운영을 효율화하는 것에 연구를 맞추고 있다. 본 논문에서는 냉방 공조 운영 효율화 하도록 하기 위해서 다중 기계 학습을 활용한 데이터 센터의 냉방 에너지 절감 시스템을 제안하고자 한다. 기존의 단수 알고리즘을 활용하여 머신 러닝의 모델구현 방식이 아닌 다중의 기계 학습을 통하여 최적화된 모델을 일일 배치로 생성하여 예측을 하는 시스템이다. 본 시스템을 통하여 사전에 최적화된 냉방 운영을 하여 기존 데이터 센터의 운영되는 과다 냉방을 감축 시켜 에너지를 절감해주는 기능을 제공한다. 본 논문 시스템 연구 결과는 폭발적으로 늘어가고 있는 데이터 센터의 에너지 효율화에 기여할 수 있고, 클라우드 사업에서 경쟁력을 줄 수 있는 운영 시스템 방안을 제시한다.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.765-770
• /
• 2008

This paper presents the power control for the hybrid electric propulsion system. In this paper, the hybrid propulsion system consists cf the generator and battery as power supply system in ship. The hybrid control system is designed with energy saving algorithm for decreasing the power consumption of power supply system. This paper suggests the method to increase efficiency of hybrid electric propulsion system by developing battery charging system. The performance of power control system is analyzed with the experiment equipment for hybrid propulsion system, and the results showed a good property.

• Structural Engineering and Mechanics
• /
• v.73 no.5
• /
• pp.543-554
• /
• 2020

This paper aims to investigate the seismic performance of RC short columns and long columns with welding stirrups. Through the low-cyclic horizontal loading test of specimens, the seismic performance indexes such as failure modes, hysteretic curve, skeleton curve, ductility, energy dissipation capacity, stiffness degradation and strength degradation were emphatically analyzed. Furthermore, the effects of shear span ratio, stirrups ratio and axial compression ratio on the performance of specimens were studied. The results showed that the seismic performance of the RC short columns with welding stirrups were basically the same as that of the RC short columns with traditional stirrups, but the seismic performance of RC long columns with welding stirrups was better than that of RC long columns with traditional stirrups. The seismic performance of RC short columns and long columns with welding stirrups could be improved by increasing stirrup ratio and shear span ratio and reducing axial pressure ratio. Moreover, the welding stirrup have the advantages of steel saving, industrialization and standardization production, convenient construction, and reducing time, which indicated that the welding stirrups could be applied in practical engineering.