• Journal of the Korean Dietetic Association
• /
• v.9 no.1
• /
• pp.71-80
• /
• 2003

Food intake patterns and iron nutritional status of male and female college students were studied based on dietary iron density. Dietary data were collected using the method of 24-hour recalls for 3 consecutive days from 106 students, and fasting blood were drawn to measure iron nutritional status indicators such as total iron binding capacity, serum iron, hematocrit, hemoglobin, and red blood cell count. Mean daily iron intakes of male and female students were 13.3㎎ and 10.0㎎, which were 107% and 63% of the RDA, respectively. However, dietary iron density were similar between male and female students as 5.9㎎/1,000㎉ and 5.7㎎/1,000㎉, respectively. The diets were divided into two groups according to iron density; high iron density group (6㎎/1,000㎉ or more) and low iron density group (less than 6㎎/1,000㎉). The students in high density group had lower intakes of energy, especially fat, than those in low density group. Female students in high density group showed significantly higher intakes of iron, and non-heme iron and folate than those of low density group. The students in high density group consumed more rice, hamburger, and eggs, while those in low density group consumed more Ra-myon and alcoholic beverages. The students in high density group consumed greater proportions of iron from plant-origin foods. Vegetables, legumes and seasonings were the food groups that female students in high density group consumed significantly more than those in low density group. Also the percentages of female students with iron deficiency were higher in low density group. These results suggest that diet with high iron density is important to improve iron nutritional status of women, and further research about the effective way to increase iron density in our diet is needed.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1018-1024
• /
• 1999

The effects of operating temperature and stress on degradation of components in high temperature steam generator were investigated. Several 2.25CrlMo tubes which had operated over 20 years and an unused 9CrlMoVNb tube were tested. For the former samples, the amount of $\textrm{M}_{6}\textrm{C}$ carbide and its size are increased with the aging or operating time. The precipitation behavior of carbides ($\textrm{M}_{2}\textrm{O}$, $\textrm{M}_{6}\textrm{C}$) is changed with the operating temperature of the tubes. However, unused 9CrlMoVNb samples show a different carbide precipitation process due to high chromium, vanadium, and niobium contents. The amount of Cr-rich $\textrm{M}_{23}\textrm{C}_{6}$ carbide is significantly increased with aging time, but that of $\textrm{M}_{6}\textrm{C}$ type carbide is rarely changed with aging time at elevated temperatures.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.1
• /
• pp.58-63
• /
• 2010

The glass-ceramics made from the mixture of coal bottom ash, produced from a thermal power plant mixed with $Na_2O$ and $Li_2O$ was fabricated and their crystallization behavior was studied using a non-isothermal analyzing method. The temperature for 50% crystallization was higher than the exothermic peak temperature $T_p$ at DTA curve and the quickest crystallization temperature was much the same as $T_p$ as identified from the relationships of crystallized fraction and crystallization rate with temperature. By using Kissinger equation describing a crystallization behavior, the activation energy (262 kJ/mol), the Avrami constant (1.7) and the frequency ($5.7{\times}10^{16}/s$) for crystallization were calculated from which the nepheline crystal could be expected as showing an 1~2-dimensional surface crystallization behavior mainly with some bulk crystallization tendency at the same time. The actual observation of microstructure using SEM showed the considerable amount of surface crystals of dendrite and the bulk crystals with low fraction, so the prediction by the Kissinger equation was in accord with the crystallization behavior of glass-ceramics fabricated in this study.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.513-517
• /
• 2013

This study focused on the synthesis of $Nb_xSrTi_{1-x}O_3$ photocatalysts which partially inserted Nb ions with excellent ability of fluorescence into the perovskite structured $SrTiO_3$ frameworks and their photocatalytic hydrogen productions from methanol/water splitting corresponding to the molar ratios of Ti and Nb. The characteristics of the synthesized $SrTiO_3$ and $Nb_xSrTi_{1-x}O_3$ powders were analyzed by X-ray diffraction (XRD), energy dispersive X-ray spectrometer (EDS), and UV-Visible spectrometer. The hydrogen evolution from methanol/water photo-splitting was enhanced over $Nb_{0.05}SrTi_{0.95}O_3$ compared to those over $SrTiO_3$ and another $Nb_xSrTi_{1-x}O_3$; 4.9 mL of hydrogen gases was collected after 8 h when 0.5g of $Nb_{0.05}SrTi_{0.95}O_3$ catalyst was used in pH 10.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.3-12
• /
• 2015

We researched characteristics of heat recovery rate and fouling according to structures and materials in heat exchangers like water preheater and air preheater. Economizer and air preheater have used in thermal electric power plant. we made small incinerator and heat exchangers to carry out simulated experiment. We observed fouling formation and change of heat recovery rate, combusting powdered coal for 24 hr. In economizer, fin tube type had the largest amount of fouling formation, followed by tube line type > pipe type > auto washing type according to structures. As heat recovery rate, fin tube showed highest recovery rate, followed by auto washing type > pipe type > tube line type. In air preheater, fin tube type had the largest amount of fouling formation, followed by fin plate type > pipe type > pipe type coated by teflon > pipe type coated by ceramic according to structures. And then, heat recovery rate showed the same oder.

• Resources Recycling
• /
• v.27 no.2
• /
• pp.38-47
• /
• 2018

Integrated gasification combined cycle (IGCC) is a next generation energy production technology that converts coal into syngas with enhanced power generation efficiency and environmental performance. IGCC produces almost coal gasification slag as the solid by-product. IGCC slag is generated about 140,000 tons for a year although recycling of it is still in the early stages. We evaluated the potential of IGCC slag which is generated from a pilot plant in South Korea as an alkali-activated cement. Samples which were activated with the combined activator of sodium silicate solution and caustic soda had an average compressive strength of 4.5 MPa, showing expansion. Expansion of the alkali-activated slag was presumed to be caused by free CaO in the slag, although it was not detected by the ethylene glycol method. Samples that were activated with the combined activator of sodium aluminate and caustic soda had an average compressive strength of 10 MPa. Hydroxy sodalite and $C_3AH_6$ were found to be the new crystalline phases. IGCC slag can be used as an alkali-activated material, but the strength performance should be improved with proper mix design approach to calculate optimum proportions which can alleviate the expansion issue at the same time.

• Journal of the Korean Dietetic Association
• /
• v.10 no.1
• /
• pp.13-24
• /
• 2004

This study was designed to examine fast food consumption, nutritional knowledge, food behavior and dietary intake of university students and to investigate if there were differences in these variables by fast food consumption. The questionnaire was administered to university students in Daejeon. Data(n=269) was analyzed using $x^2$-test and analysis of variance. Subjects were mostly female(62%) and freshmen or sophomores(86%). Based on the frequency of fast food consumption, subjects were categorized into non-users(27.9%), users(<2 times/week, 42%) and frequent users($\geq$2 times/week, 30.1%). Those who used fast foods(n=194) consumed the foods 7.5 times per month, on the average. Subjects scored 15.6 out of 20 on a nutritional knowledge scale, showing the moderate level of knowledge. When examined by fast food use, the nutritional knowledge score was 15.5 for non-users, 16.1 for users, and 15.0 for frequent-users(p<0.05). Only two items, regarding 'fat type(animal, plant) and health' and 'importance of having breakfast', were significantly different by fast food consumption, with user group and non-users scoring higher than frequent-users(p<0.05). Food behaviors, measured by 20 items, were not desirable, with mean scores of 51.5(possible score: 20-100). Subjects showed problems in eating meals regularly, eating a variety of foods, eating breakfast, and consumption of some food groups(vegetables, fruits, and proteins). Fast food non-users showed more desirable food behaviors than users or frequent-users, such as having processed foods (p<0.001) and eating-out less frequently(p<0.01). Dietary intake data showed that some nutrient intakes, including energy, calcium, iron, zinc and folic acid were less than 75% of the RDA. Index of nutritional quality(INQ) was adequate except for calcium and zinc. Compared to non-users or user group, frequent-users of fast foods consumed higher amounts of lipids(p<0.05), and had lower INQ for calcium(p<0.01). This study described the status of fast food consumption, nutritional knowledge, food behavior of university students, and provided some baseline data for planning nutrition education for university students.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.28 no.4
• /
• pp.177-190
• /
• 2016

In case of the seabed around and under gravity structures such as submerged breakwater is exposed to a large wave action long period, the excess pore pressure will be generated significantly due to pore volume change associated with rearrangement soil grains. This effect will lead a seabed liquefaction around and under structures as a result from decrease in the effective stress. Under the seabed liquefaction occurred and developed, the possibility of structure failure will be increased eventually. Lee et al.(2016) studied for regular waves, and this study considered for irregular waves with the same numerical analysis method used for regular waves. Under the condition of the irregular wave field, the time and spatial series of the deformation of submerged breakwater, the pore water pressure (oscillatory and residual components) and pore water pressure ratio in the seabed were estimated and their results were compared with those of the regular wave field to evaluate the liquefaction potential on the seabed quantitatively. Although present results are based on a limited number of numerical simulations, one of the study's most important findings is that a more safe design can be obtainable when analyzing case with a regular wave condition corresponding to a significant wave of irregular wave.

• Clean Technology
• /
• v.22 no.2
• /
• pp.96-105
• /
• 2016

VOCs emissions from industries cause the air pollution and odor. In the industrial facilities, the existing odor treatment techniques have limits and problems. In this study, the optimum essential oil and metal oxide selected by screening test. lavender oil, cypress oil and TiO₂ were determined by deodorant materials and those were blended by 5%, 45%, 10%, respectively. In addition, the result of batch type experiments depending on the dilution rate, injection, rate, temperature showed that the optimum condition of deodorant is 6 mL of injection rate, and 200 times of dilution rate and the removal efficiency increased in proportion with temperature. In addition, the activation energy was calculated from the rate equation, which appeared in the 3-4 times lower than conventional deodorants.