• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.7
• /
• pp.591-597
• /
• 2012

For the past few years, the concern for clean energy has been greatly increased. Ocean thermal Energy Conversion(OTEC) power plants are studied as a viable option for the supply of clean energy. In this study, we examined the thermodynamic performance of the OTEC power system for the production of electric power. Computer simulation programs were developed under the same condition and various working fluids for closed Rankine cycle, regenerative cycle, Kalina cycle, open cycle, and hybrid cycle. The results show that the regenerative cycle showed the best system efficiency. And then we examined the thermodynamic performance of regenerative cycle OTEC power system using the condenser effluent from Uljin nuclear power plant instead of the surface water. The highest system efficiency of the condition was 4.55% and the highest net power was 181 MW.

• KEPCO Journal on Electric Power and Energy
• /
• v.5 no.3
• /
• pp.215-222
• /
• 2019

This work is experimental study of 10 kW specialized Combined Ocean Thermal Energy Conversion. We propose a C-OTEC technology that directly uses exhaust thermal energy from power station condensers to heat the working fluid (R134a), and tests the feasibility of such power station by designing, manufacturing, installing, and operating a 10 kW-pilot facility. Power generation status was monitored by using exhaust thermal energy from an existing power plant located on the east coast of the Korean peninsula, heat exchange with 300 kW of heat capacity, and a turbine, which can exceed enthalpy efficiency of 45%. Output of 8.5 kW at efficiency of 3.5% was monitored when the condenser temperature and seawater temperature are $29^{\circ}C$ and $7.5^{\circ}C$, respectively. The evaluation of the impact of large-capacity C-OTEC technology on power station confirmed the increased value of the technology on existing power generating equipment by improving output value and reducing hot waste water. Through the research result, the technical possibility of C-OTEC has been confirmed, and it is being conducted at 200 kW-class to gain economic feasibility. Based on the results, authors present an empirical study result on the 200 kW C-OTEC design and review the impact on power plant.

• Journal of Plant Biotechnology
• /
• v.46 no.2
• /
• pp.88-96
• /
• 2019

Terpenes constitute a large class of secondary metabolites in plants. The Oryza sativa terpene synthase is a vital gene in plant defense response. In this study, the molecular and physiological functions of Oryza sativa terpene synthase 30 (OsTPS30, LOC_Os08g07080) were investigated after exposure of the seeds and plants to gamma-rays. The OsTPS30 expression was slightly induced at 200 Gray (Gy), but was significantly induced at 400 Gy. The total terpenoid was synthesized more in OsTPS30-overexpressing (OX-OsTPS30) Arabidopsisthaliana plants than in wild-type (WT) plants. The OX-OsTPS30 plants exhibited resistance to gamma-rays, as compared to WT. The OX-OsTPS30 plants had significantly increased height and weight after gamma irradiation. Additionally, the activity of antioxidant enzymes was increased more in OX OsTPS30 plants than in WT plants after gamma irradiation. Furthermore, the OsTPS30-GFP fusion protein was mostly localized in the chloroplast, suggesting that OsTPS30 is putative MEP pathway-related terpene synthase.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.837-842
• /
• 2019

A large amount of radioactive material was released from the Fukushima Daiichi Nuclear Power Plant (FDNPP) in 2011 and dispersed into the environment. Though seven years have passed since the Fukushima Daiichi Nuclear Power Plant accident, some parts of Japan are still under the influence of radionuclide contamination, especially Fukushima Prefecture and prefectures neighboring Fukushima Prefecture. The long-term effective doses and the contributions of each exposure pathway (5 exposure pathways) and radionuclide ($^{131}I$, $^{134}Cs$, and $^{137}Cs$) were evaluated for people living in the regions of Fukushima and neighboring prefectures in Japan using a developed dose assessment code system with Japanese specific input data. The results estimated in this study were compared with data from previously published reports. Groundshine and ingestion were predicted to contribute most significantly to the total long-term dose for all regions. The contributions of each exposure pathway and radionuclide show different patterns for certain regions of Japan.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.28 no.9
• /
• pp.67-72
• /
• 2014

Inflow or outflow from the water treatment plant and the sewage water has potential energy. If this potential energy can be converted into electrical energy by water turbine generator, it can help to save energy because of the high capacity utilization. So recently, micro hydro power plant is reviewed in the water treatment facility. If generation capacity is low, induction generator is primarily used. If output capacity is low, generated power is supplied to the inside load. Induction generator can cause voltage drop by the inrush current at a start-up and requires reactive power for magnetization. In this study, we analyzed the flow of power and voltage variation against inrush current that occurs when the induction generator starts under the terms that loads of linear and non-linear of the water purification plant are used. Analysis results are that the voltage drop is within an allowable range and the power factor is slightly reduced by the need of reactive power.

• Journal of the Korean Ceramic Society
• /
• v.43 no.12 s.295
• /
• pp.764-767
• /
• 2006

Ni/YSZ $(Y_2O_3-stabilized\;ZrO_2)$ composite as an electrode component for High Temperature Electrolysis (HTE) was fabricated by mechanical alloying method using Ni and YSZ powders. Characterization of the synthesized composite was investigated with various analysis tools, including XRD, SEM and PSA, and a self-supporting planar unit cell prepared with the Ni/YSZ composite was prepared to study the electrochemical reactions for the production of hydrogen. The Ni/YSZ cermet is composed of crystalline Ni and YSZ, in a sub-micro scale, and has an even distribution without aggregated particles. In addition, under an electrochemical reaction, the unit cell showed an $H_2$ evolution rate from steam of 14 Nml/min and $600mA/cm^2$ of current density at the electrode.

• Korean Journal of Soil Science and Fertilizer
• /
• v.48 no.1
• /
• pp.36-43
• /
• 2015

Excess use of chemical fertilizer causes soil acidification and accumulation of salt, and thus might bring to desertification of soil. To overcome this problem, it needs limited usage of chemical fertilizer and increased usage of natural fertilizer as an alternative. In this study, dry soil-borne Bacillus sp. SHL-3, which was isolated from arid and barren soil, with plant growth promoting activity was isolated for identification and to determine optimal culture condition. A bacterial strain SHL-3 had the IAA productivity ($5.16{\pm}0.10mg\;L^{-1}$), ACC deaminase activity ($0.36{\pm}0.09$ at 51 hours) and siderophore synthesis. It was identified as genus Bacillus sp.. Also, optimal culture condition of SHL-3 were $20^{\circ}C$ and pH 7 in LB medium. Bacillus sp. SHL-3 had up to 4% salt tolerance in the medium. We evaluated the plant growth promotion ability of SHL-3 using yam (Dioscorea japonica Thunb.). As a result, Bacillus sp. SHL-3 was effective on the increase of the shoot length (202.4% increase for 91 days). These results indicate that Bacillus sp. SHL-3 can serve as a promising microbial resource for the biofertilizers of soil.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.3
• /
• pp.33-42
• /
• 2020

Operational energy is the energy that is used during the occupancy stage of building life cycle. It is associated with relatively longer proportion of infrastructure's service life and can constitute 80-90% of the total energy. Assessing the energy use in buildings is essential since they are significant contributors to energy demand. In this regard, energy performance of buildings has become the focus of many regulations. This paper aimed to review the regulations about the energy performance of buildings during their operational stage in Korea. For energy efficient operation program for existing buildings, governments should implement policies and support voluntary programs that rely on collecting and managing building performance data and using this data to inform public and private-sector operation and maintenance strategies. Implementing these policies and programs requires tools and processes for collecting, curating, managing, analyzing, and publishing this data. Energy assessment tool, that is a data resource management tool that enables to assess energy use across the entire portfolio of buildings, is also required.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.1-6
• /
• 2016

Seawater desalination plants generally have two inherent problems which stem from energy inefficiency and desalination concentrate management. The former has been somewhat resolved thanks to the innovative methods in utilizing new and renewable energy resources whereas the latter still has much issues to be dealt with. This paper introduces the application of a desalting process for the disposal of desalination concentrate (especially, Mg) and to improve its cost effectiveness of a MVR seawater desalination plant built in Jeju. Principal component analysis on the desalination concentrate has revealed a steady reduction of Mg with the application of the desalting process verifying its functional reliability. Also, it was found that our MVR seawater desalination plant is not only energy efficient but also could be effectively applied for the dual purpose of fresh water production and concentrate management.

• Journal of Energy Engineering
• /
• v.6 no.1
• /
• pp.41-51
• /
• 1997

A dynamic mathematical model of a thermal power plant with a single drum-type boiler is described with the base on modular concept. The present process model, which is including full scope of the components and high load changes, is based on physical approach through lumped parameters. The module, which means a component of the power plant and must essentially depict the characteristics of the component well, might be interconnected using pressure nodal method in a arrangement determined by users. With the results of the load changes of 75 MW to 95 MW and 95MW to 75 MW with the rate of 3 MW/min, the applicability of the process model is examined connecting to DCS(Dispersion Control System), which has a real running logic of 100 MW real power plant.