• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.2
• /
• pp.79-85
• /
• 2012

In this study, Application of sequencing batch reactor (SBR) process for RO retentate treatment was performed. Efficiency of treatment by load and temperature variation was tested. The SBR process was operated two types as HRT per one cycle was 8 and 12 hours, respectively. Methanol was injected for an effective denitrificaion owing to low C/N ratio of the RO retentate. TN removal efficiency of the SBR process was relatively stable at the change of flow-rate and temperature. The optimum time cycle of SBR process was 2 cycle/day for TN removal, and in the case of 3 cycle/day, the effluent TN concentration was found under the effluent quality standard. In the result of assessment, the application of SBR process for RO retentate treatment was effective and could be utilized to design for the wastewater treatment plant. The specific nitrification rate (SNR) and specific denitrification rate (SDNR) were $0.043{\sim}0.066kg\;NH_3-N/kg\;MLVSS{\cdot}day$ and $0.096{\sim}0.287kg\;NH_3^--N/kg\;MLVSS{\cdot}day$, respectively. The derived kinetic could be applied for design to the aerobic and anoxic tank in the RO retentate treatment.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2006

Microwave energy (2450 MHz) was applied to extract health-effective component (HEC) from grape seed. Three different solvents approved for grape seed extract such as water, ethanol and acetone, were confirmed in their microwave-heating properties and by which extraction efficiencies were determined. Microwave-assisted extraction (MAE) was performed under different parameters; microwave power : (0, 50, 100 and 150), time : (1, 3, 5, 7, and 9 min), the sample to solvent ratio : (1:20, 1:10, 1:5 and 1:2.5), and particle size(whole, 20, 40 and 60 mesh) and the subsequent extracts were used for determining their physicochemical properties, such as total yield : (TY), total phenolics : (TP), catechin content : (CC), electron donating ability : (EDA), and browning color. The heating properties of solvent demonstrated the optimal ranges of microwave and time as 100 W and 2 to 6 min. The TY and HFC content were higher with increasing powers in water and ethanol solvent, while HFC content were lower in acetone at over 100 W. The longer of extraction time up to 5 min, the higher extraction efficiency. Based upon the overall MAE efficiency and solvent recovery, it was found optimal to use 10 times volume of ethanol for 10 mesh of seed particle at 100 W.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.8
• /
• pp.1221-1229
• /
• 2018

Objective: A study was conducted to evaluate the varietal differences among faba bean straws and also to assess the potentials of faba bean straws supplemented with concentrate fed at the rate 70% straws and 30% concentrate mixture on feed intake, digestibility, body weight gain and carcass characteristics of the animals. Methods: Forty yearling Arsi-Bale sheep with initial body weight of $19.85{\pm}0.29kg$ (mean${\pm}$standard deviation) were grouped in a randomized complete block design into eight blocks of five animals each based on their initial body weight. Straws included in the study were from Mosisa (T1M), Walki (T2W), Degaga (T3D), Shallo (T4S), and local (T5L) varieties of faba bean and concentrate (2:1 ratio of wheat bran to "noug" seed cake). The experiment consisted of seven days of digestibility and 90 days of feeding trials followed by evaluation of carcass parameters at the end. Results: Local variety had lower (p<0.05) in grain and straw yield compared to improved varieties but higher in crude protein, metabolizable energy contents and in vitro organic matter digestibility. The apparent digestibility of dry matter and crude protein of sheep fed Walki and Mosisa straws were higher than (p<0.05) straws from Shallo varieties. Sheep fed Walki straw had greater (p<0.05) dry matter intake, average daily gain and feed conversion efficiency than sheep fed local and Shallo straws. Slaughter body weight and empty body weight were higher (p<0.05) for sheep fed Mosisa and Walki straws as compared to sheep fed Shallo straws. Apart from this, the other carcass components were not affected (p>0.05) by variety of the faba bean straws. Conclusion: There is significant varietal differences between faba bean straws both in quality and quantity. Similarly, significant variation was observed in feed intake, digestibility, body weight gain and feed conversion efficiency among sheep fed different straws of faba bean varieties with concentrate supplement. Based on these results, Walki and Mosisa varieties could be recommended as pulse crop rotation with cereals in the study area.

• Clean Technology
• /
• v.18 no.4
• /
• pp.398-403
• /
• 2012

Selective nitrification and granulation have been carried out in a pilot scale air-lift sequencing batch reactor (SBR) for stable and economical nitrogen removal from wastewater. The SBR showed about 100% nitrification efficiency up to 1.0 kg ${NH_4}^+-N/m^3{\cdot}d$, about 90% efficiency at 1.0-2.0 kg ${NH_4}^+-N/m^3{\cdot}d$, and it was less than 90% when the load was higher than 2.0 kg ${NH_4}^+-N/m^3{\cdot}d$. Nitrite accumulation was induced by selective inhibition of nitrite oxidizing bacteria by free ammonia inhibition and dissolved oxygen limitation. For the purpose, high nitrite ratio (> 0.95) was obtained by keeping the pH higher than 8.0 and dissolved oxygen lower than 1.5 mg/L. In addition, sludge granulation was achieved by keeping reactor settling time to 5 minutes to wash out poor settling sludge and to promote the growth of granulation sludge. The operation accelerated sludge granulation and the sludge volume index (SVI) decreased and stably maintained to less than 75 in 60 days.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.694-701
• /
• 2013

A new copolymer named T-TI24T (poly((5,5-(2-butyl-5,6-bisdecyloxy-4,7-di-thiophen-2-yl-isoindole-1,3-dione))- alt-(2,5-thiophene))) based on phthalimide derivative and thiophene is synthesized by the Stille-coupling reaction. The polymer shows relatively high number average molecular weight of 86500 g/mol with good solubility in common organic solvents such as chloroform, 1,2-dichlorobenzene, and toluene and is thermally stable up to $380^{\circ}C$. Besides, it possesses a relatively low highest occupied molecular orbital (HOMO) energy level of -5.33 eV, promising the high open circuit voltage ($V_{oc}$) for photovoltaic applications. Active layer solution of polymer T-TI24T-as a donor and (6)-1-(3-(methoxycarbonyl)- {5}-1-phenyl[5,6]-fullerene (PCBM)-as an acceptor in different weight ratios is applied to fabricate the polymer solar cell devices. The ratio of polymer/PCBM affects the solar cell efficiency and the best performance exhibits in the device with polymer/PCBM = 1:3 (w/w), which shows a power conversion efficiency (PCE) of 0.199% and a $V_{oc}$ of 0.99 V, respectively. Even though the device shows the very low PCE, the $V_{oc}$ is higher than that of well known bulk heterojunction type solar cell based on P3HT:PC61BM (c.a. 0.5 V).

• Korean Journal of Poultry Science
• /
• v.47 no.4
• /
• pp.275-283
• /
• 2020

This experiment was conducted to investigate the effect of the addition of enzymes and microorganisms to broiler feed on productivity, carcass characteristics, intestinal microflora, and feces odor. A total of one-hundred eighty 180 chicks (Ross 308) were randomly assigned to 5 treatments with 3 replications each having 12 birds per pen. The experimental group was divided into 0.1% EZ group (0.1% metallo-protease added to the feed), 0.2% EZ group (0.2% metallo-protease added to the feed), M group (2.0% Bacillus veleznesis CE 100 added to the feed), and MW group (2.0% Bacillus veleznesis CE 100 added to the feed and drinking water). In the results, final body weight, body weight gain, the feed conversion ratio, protein efficiency, and energy efficiency were not significantly different among all treatments in across all periods. Carcass weight, proventriculus, gizzard, heart, small intestine, cecum, and rectum weight were not significantly different among all of the treatments. However the liver weight was significantly higher in the 0.1% EZ group than in the control, M and MW groups (P< 0.05). E. coli was significantly lower in MW than in the control and M (P<0.05), and it was significantly higher in the M than 0.2% EZ and MW (P<0.05). H2S emissions in feces was not significantly different among all treatments, but NH3 emissions was were significantly higher in 0.1% EZ than in MW (P<0.05). In conclusion, the addition of 0.1% of metallo-protease was effective in the development of the liver of broilers.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.6
• /
• pp.556-561
• /
• 2020

The aging and declining agricultural population in the modern society requires improvement of the agricultural environment and is one of the representative problems. And since most of the work systems always require a transport work, the ratio of labor consumed in the transport work is very high. Accordingly, many types of transport vehicles are being developed and sold, and in the early days, most of them are powered transport vehicles using fossil fuels. However, it is paying attention to next-generation eco-friendly energy such as hydrogen, fuel cells, solar power, and bio due to the strengthening of international environmental regulations such as global warming and the Convention on Climate Change and the depletion of fossil fuels. Therefore, in this study, the ultimate goal is to develop an eco-friendly, easy-to-operate, safe agricultural electric vehicle that replaces fossil fuels. It was designed with a focus on controlling a wide range of vehicle speeds and securing stability of electric agricultural vehicles. Considering the performance and design, it is composed of a frame, a driving part, a steering part, and a controller system, and we are going to review and manufacture each part. It is believed that the manufactured electric vehicle for agriculture can be easily and conveniently operated in an agricultural society where young manpower is scarce, and can be helpful to the agricultural society through high efficiency.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6B
• /
• pp.695-701
• /
• 2006

A toluene-degrading bacterial strain was isolated from a mixed culture that was maintained using toluene as a sole carbon and energy source. The isolated bacterium was classified as Pseudomonas sp. TBD4 based on the close relationship to bacteria belonging to this genus. A bottle study to determine biodegradation rates of individual aromatic compounds showed that the biodegradation was faster in the order of toluene, benzene, styrene, and p-xylene. However, when various mixtures were subjected to TDB4, styrene was degraded at the highest rate, indicating that both toluene and p-xylene could stimulate the degradation of other substrates whereas styrene played as an inhibitor. In addition, the mixed culture and TDB4 were inoculated to the bioactive foam reactor (BFR), and the reactor performance and the corresponding change of microbial community were monitored using the fluorescent in situ hybridization (FISH) method. When an inlet concentration of the VOC mixture increased to greater than 250 ppm, the overall removal efficiency dropped significantly. The FISH measurement demonstrated that the ratio of TDB4 to the total bacteria also decreased to less than 20% along with the decline in removal efficiency in the BFR. As a result, the periodic addition of the pre-grown TDB4 might have been beneficial to achieve a stable performance in the BFR operated over an extended period.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.33-40
• /
• 2006

The characteristics of the aluminum waste melting and the distribution of the radioactive nuclides have been investigated for the estimation on the volume reduction and the decontamination of the aluminum wastes from the decommissioning of the TRIGA MARK it and III research reactors at the Korea Atomic Energy Research Institute(KAERI). The aluminum wastes were melted with the use of the fluxes such as flux $A:NaCl-KCl-Na_3AlF_6$, flux B:NaCl-NaF-KF, flux $C:CaF_2$, and flux $D:LiF-KCl-BaCl_2$ in the DC graphite arc furnace. For the assessment of the distribution of the radioactive nuclides during the melting of the aluminum, the aluminum materials were contaminated by the surrogate nuclides such as cobalt(Co), cesium(Cs) and strontium(Sr). The fluidity of aluminum melt was increased with the addition of the fluxes, which has slight difference according to the type of fluxes. The formation of the slag during the aluminum melting added the flux type C and D was larger than that with the flux A and B. The rate of the slag formation linearly increased with increasing the flux concentration. The results of the XRD analysis showed that the surrogate nuclide was transferred to the slag, which can be easily separated from the melt and then they combined with aluminum oxide to form a more stable compound. The distribution ratio of cobalt in ingot to that in slag was more than 40% at all types of fluxes. Since vapor pressures of cesium and strontium were higher than those that of the host metals at the melting temperature, their removal efficiency from the ingot phase to the slag and the dust phase was by up to 98%.

• Journal of Korean Academy of Nursing
• /
• v.1 no.1
• /
• pp.111-132
• /
• 1970

An analysis of nursing activities in a in-patient ward and its management was observed in order to assess necessary number of nursing hands and find out reasonable work management with them. The study was performed with two wards of St. Mary′s Hospital, Catholic Medical Center, for the period from July to December 1970. The results and conclusions were as the following 1. The role of the nurses are determined by doctor′s order in 57.7% in kind, 80.0% in amount. and by nurses decision 20.0% in amount. 2. Works related to patient care are found to be 20.6% in the internal medicine ward and 20.4% in the surgical ward while works related to treatment are 4.7% in the former and 27.2% in the letter. Medication occupies 40.0% in the internal medical ward while 26.6% in the surgery ward, and observation occupies 34.7% in the former while 25.8% in the letter. These can be said to reflect characteristic differences bet ween the two wards. 3. When nursing functions were evaluated by importance "A" level in the amount of works to be done occupied 67.6% in the surgical ward and 62.8% in the internal medical ward. In the kind of the important works, "B"level is found to be most frequent with 50% while "A"level 43%. When evaluated by difficulty, "B"level was found to be most frequent in amount in both internal medicine and surgical wards (52.6%, 38.2%). 4. Works needing professional knowledge and skills occupied 92% in the both wards while unprofessional works 2.8% and 4.2% respectively. There are indications, however, that unprofessional works have an increasing tendency. 5. When evaluated by the amount of works, the surgical ward has 11 nurses less and the internal medicine ward 3 nurses less then the necessary number of nursing staffs. There are shortage of 12 and 6 nurses respectively when evaluated by the number of patients and 18 nurses in the both wards when evaluated by the medical regulations of the Government. 6. The ratio of the nursing staff to patient was found to be 1:11.5, 1:23.0 and 1:34.5 in the morning, evening and night turn in the surgical ward. In the medical word the ratio was 1:9.4, 1:22.0 and 1:33.0. 7. The deficiency of necessary equipment and tension accompanying management of those equipment were found to lower the effective functioning of the head nurse who is a junior manager of the ward. They also consume much of the time and energy of the nurses at work who are over burdened in most of the cases. 8. The high rate of the number of nurses who leave the job impairs the functioning of team work which is considered to be most important in the effective performance of nursing activities and thus contributes to lower the efficiency of nursing functions.