• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.717-719
• /
• 2013

Building Energy Management System application not only helps maintain internal environment comfortable, but also maximizes energy efficiency and extends an expected life of facility system. Due to generalized computer usage, development of communication system, and bigger and more complex of building in 1990s, automation and comprehensive management system were acknowledged to be important; and these have been widely applied in domestic market. This paper study the design of the BEMS project.

• Journal of Korean Society of Rural Planning
• /
• v.28 no.4
• /
• pp.127-138
• /
• 2022

In responding to climate change in the agricultural sector, Climate Smart Agriculture (CSA) is an approach to establish a sustainable agricultural system through comprehensive management of technology, policy, and investment. The international community is continually expanding CSA implementation, and it became more important to understand the status of the domestic agriculture system and practices that are relevant to CSA. This study explored the available CSA in domestic agricultural systems and presented the order of relative importance of CSA technology. AHP analysis is employed for the evaluation with the following criteria: productivity, marketability, adaptability, and mitigation. The relative importance is evaluated with six agricultural technologies (soil, crop management, water, energy efficiency, alternative energy, and precision agriculture) in 28 agricultural technology sectors. The results of the AHP analysis showed that 'alternative energy' was found to be a top priority among the agricultural technology sectors, and 'shallow depth drain in rice paddy' was a top priority for agricultural technology. Also, the 'marketability' in soil and water sectors, 'mitigation' in crop management, and 'adaptability' in energy efficiency and alternative energy were given higher priority. The results of this study can be used as a good source for strategic CSA preparation and application.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.74-83
• /
• 2011

This paper recognized a need in the architecture, engineering, and construction industry for new programs and methods of producing reliable energy simulations using BIM (Building Information Modeling) technology. Current methods and programs for running energy simulations are not very timely, difficult to understand, and lack high interoperability between the BIM software and energy simulation software. It is necessary to improve on these drawbacks as design decision are often made without the aid of energy modeling leading to the design and construction of non-optimized buildings with respect to energy efficiency. The goal of this research project is to develop a new methodology to produce energy estimates from a BIM model in a more timely fashion and to improve interoperability between the simulation engine and BIM software. In the proposed methodology, the extracted information from a BIM model is compiled into an INP file and run in a popular energy simulation program, DOE-2, on an hourly basis for a desired time period. Case study showed that the application of this methodology could be used to expediently provide energy simulations while at the same time reproducing the BIM in a more readably three dimensional modeling program. With the aid of an easy to run and easily understood energy simulation methodology, designers will be able to make more energy conscious decisions during the design phase and as changes in design requirements arise.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.48-54
• /
• 2015

In a centralized cooling plant, precise mechanical design and control strategy are required for peak and partial cooling load management. Otherwise, it will lead to low efficiency of cooling system and energy loss due to low partial load efficiency. The purpose of this paper is to enhance energy performance of the centralized cooling plant by controlling flow system in an industrial building using measured data and energy performance simulation program. The simulation results show that the proposed flow control can cut down annual electric power consumption by about 17% compared with the conventional cooling system.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.4
• /
• pp.839-847
• /
• 2016

Energy recovery battery testing systems (ERBTS) have been widely used in battery manufactures. All the ERBTS are connected in parallel which forms a special and complicated micro-grid system, which has the shortcomings of low energy recovery efficiency, complex grid-connected control algorithms issues for islanded detection, and complicated power circuit topology issues. To solve those shortcomings, a DC micro-grid system is proposed, the released testing energy has the priority to be reutilized between various testing system within the local grid, Compared to conventional scheme, the proposed system has the merits of a simplified power circuit topology, no needs for synchronous control, and much higher testing efficiency. The testing energy can be cycle-used inside the local micro-grid. The additional energy can be recovered to AC-grid. Numerous experimental comparison results between conventional and proposed scheme are provided to demonstrate the validity and effectiveness of the proposed technique.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.10
• /
• pp.99-105
• /
• 2012

ZigBee is the low power, low cost and low data rate wireless personal area network(LR-WPAN) standard. The Directed-Messaging is the protocol which improves the energy efficiency through reducing the redundant message transmission by transmitting messages with directional information toward the specified sub-network area in wireless sensor network using broadcasting. In this paper, we design and implement the experimental grid sensor network using ZigBee modified by the Directed-Messaging for the energy efficiency improvement. The experimental sensor network in this paper is configured with Nano24 supporting the ADV message and the routing management module modified to use the directional information. The energy efficiency improvement of the experimental sensor-network by evaluating the experimental results according to transmitting ADV message.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.10
• /
• pp.18-23
• /
• 2008

The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM(Supply-Side Management) but also DSM(Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically an amount of potential participants considering rebates, which have influence on penetration amounts for DSM program using by 'A Survey of End-User for Energy Efficiency Demand Side Management Programs'.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.916-918
• /
• 1996

We have an urgent matter that is lack of energy resource. So we have to accomplish the design of economical energy utility systems and to develop energy facilities with high efficiency. Cogeneration system is one of them. It has high efficiency and can solve unbalanced electricity and heat demand in Summer & Winter concurrently. Recently, to increase the efficiency and stability of the total system, it is applying automatic control and monitoring software to the hardware facilities in industrial control systems. Therefore, these systems has been researched and developed in the advanced countries. It also has been researched and developed in the domestic since '60. But the control and monitoring software in cogeneration system has been hardly developed and has been imported expensive products from the advanced countries. In this study, we have developed the software of operating control, status monitoring, operating data managing and tele-controlling. We have confirmed usefullness of developed software by applying to gas turbine cogeneration system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.547-548
• /
• 2009

The development of USN(Ubiquitous Sensor Network) technology is creating numerous application areas. Although a network configuration with fixed sensors was the norm in the past, the coexistence of mobile and fixed sensor nodes is a new trend. Fixed sensor networks focused on the energy efficiency of nodes, but the latest studies consider guaranteeing the mobility of nodes and maintaining their connectivity, while remaining energy efficient at the same time. This paper proposes a routing protocol for a mobile ad-hoc sensor network that improves the mobility, connectivity and energy efficiency of nodes while allowing for the management and maintenance of a large number of nodes even in a complex communication environment where mobile and fixed nodes coexist. An algorithm for multi-hop multi-paths, a technique for topology reconfiguration by node movement prediction and vibration sensors, path setting for a large number of nodes, and efficient data transfer technology have been introduced to implement the modified LEAHC-AOMDV protocol. Furthermore, the excellence of this protocol was verified through a comparative experiment with the conventional LEACH protocol.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.5
• /
• pp.103-107
• /
• 2008

There are about 160 post office buildings of medium and/or large scale in Korea Energy saving and efficient manpower management for the buildings are important. In this paper, patterns of the operation and energy consumption of the post office buildings are analyzed. The authors suggest an integrated and grouped management of the dispersed post office buildings using internet, through which more improved efficiency can be expected.