• Nuclear Engineering and Technology
• /
• v.56 no.8
• /
• pp.3097-3111
• /
• 2024

Since the level 2 PSA of OPR-1000 was the requirement for regulatory purposes, Cs-137 release estimation was contained as the Nuclear Safety Act of ROK in which the Cs-137 release frequency exceeding 100 TBq was determined to happen less than 1.0E-6 per year after the Fukushima Daiichi Accident. However, Cs-137 release estimation from the conventional level 2 PSA of OPR-1000 provided uncertainty due to dominant accident sequence consideration. Thus, this study aimed to develop systematic methods through the overall framework to quantify realistic uncertainty concerns of radioactive material release using sensitivity and uncertainty analysis methods and apply them to OPR-1000. This framework helped to quantify confidential value for the Cs-137 release under the BEPU approach using both parametric and non-parametric methods to cover both realistic and conservative points. Uncertainty propagation analysis showed the unexpected uncertainty increase of Cs-137 release exceeding 100 TBq. The non-parametric uncertainty analysis provided higher conservative concerns for safety than the realistic concerns in terms of economics when compared with the parametric uncertainty analysis. Wilks' uncertainty analysis showed the importance to consider conservative Cs-137 release in order to reach the higher safety need. Sensitivity analysis showed reasonable relationships between engineering safety parameters with the Cs-137 release.

• Environmental and Resource Economics Review
• /
• v.14 no.4
• /
• pp.817-838
• /
• 2005

In this paper, the resource adequacy as well as the optimum fuel mix is obtained by the following procedures. First, the regulation body, the government agency, determine the reliability index as well as the optimum portfolio of the fuel mix during the planning horizon. Here, the resources with the characteristics of public goods such as demand-side management, renewable resources are assigned in advance. Also, the optimum portfolio is determined by reflecting the economics, environmental characteristics, public acceptance, regional supply and demand, etc. Second, the government announces the required amount of each fuel-type new resources during the planning horizon and the market participants bid to the government based on their own estimated fixed cost. Here, the government announces the winners of the each auction by plant type and the guaranteed fixed cost is determined by the marginal auction price by plant type. Third, the energy market is run and the surplus of each plant except their cost (guaranteed fixed cost and operating cost) is withdrew by the regulatory body. Here, to induce the generators to reduce their operating cost some incentives for each generator is given based on their performance. The performance is determined by the mechanism of the performance-based regulation (PBR). Here the free-riding performance should be subtracted to guarantee the transparent competition. Although the suggested mechanism looks like very regulated one, it provides two mechanism of the competition. That is, one is in the resource construction auction and the other is in the energy spot market. Also the advantages of the proposed method are it guarantee the proper resource adequacy as well as the desired fuel mix. However, this mechanism should be sustained during the transient period of the deregulation only. Therefore, generation resource planning procedure and market mechanisms are suggested to minimize possible stranded costs.

• Journal of Korean Home Economics Education Association
• /
• v.18 no.4 s.42
• /
• pp.67-84
• /
• 2006

This study was carried out to investigate nutrient intake, dietary self-efficacy, and physical activity self-efficacy of elementary school students by obesity index in Gyeongbuk area. The survey was conducted from June 7 to June 18 in 2005. The study was peformed by analyzing a questionnaire answered by 523 elementary school student in 5th and 6th grade. The obesity index was gained by height and weight data. Nutrient intakes was evaluated by 24hr-dietary record. Statistical data analysis were completed using the SPSS 12.0 program. The results were summarized as follows; The result of the body measurement was that 31.7% of underweight group, 45.1% of normal group, 12.8% of overweight group, 10.3% of obese group. 13.9% of underweight group experienced weight control, and 17.5% of the subject respond they will try the weight control in the future. Male students showed significantly higher exercise frequency than female students(p<0.001). Male underweight group and female obese group show the highest exercise frequency. Daily energy intake of the subject showed 80.1% in male students and 87.5% in female students revealed under the recommended dietary allowance(RDA) for Korean. The intake ratio of energy nutrients was identical in male and female of underweight group and obese group, so this showed that intake style was similar in two groups. By investigating through MAR(mean adequacy ratio), underweight group of male students and both normal and overweight group of female students were lowest, while overweight group of male students and underweight group of female students were the highest. Physical activity self-efficacy of male students was higher than female students, and physical activity self-efficacy by obesity index was higher in underweight group of male students and obese group in female.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.2
• /
• pp.95-113
• /
• 2021

This study examined the food group and dietary nutrient intakes by sugar-sweetened beverage(SSB) intake level in high school students aged 15~18 years(n=2,377) using the 2007~2015 Korea National Health and Nutrition Examination Survey. Subjects were classified into three groups by SSB(included carbonated drinks, sports drinks, and caffeinated drinks that contained added sugars) intake level obtained from 24-hour recall method: SSB 1(SSB intake 0 g/d), SSB 2(0 g/d < SSB intake < 50th percentile) and SSB 3(SSB intake ≥ 50th percentile). Result of daily intakes of SSB were 160.6±10.5 g/d for boys and 98.6±7.1 g/d for girls and it increased for boys(p<0.0001) and girls(p=0.0280) by year. The highest intakes were carbonated drinks followed by fruit juices for boys and girls. Intakes of carbonated drinks increased as 2.7 times for boys(p<0.0001) and 1.6 times for girls between 2007 and 2015 year. Daily intakes of vegetables were the lowest in SSB 3 of three groups for boys and girls(p<0.0001), and those of fruits were lower in SSB 2 and SSB 3 than SSB 1 for boys(p=0.0013). Daily intakes of milk & milk products decreased toward SSB 3 group for boys(p<0.0001) while those were the lowest in SSB 3 of three groups for girls. Daily intakes of dietary fiber(21.3~25.3%) and calcium(49.6~59.8%) were very low compared to the dietary reference intakes. Percentage of daily intakes compared to the dietary reference intakes increased for energy for boys and girls(p<0.0001) while decreased for vitamin C toward SSB 3 group for boys(p<0.0001) and girls(p=0.0382). Those of calcium were the lowest in SSB 3 of three groups for boys(p<0.0001) and girls(p=0.0008). Ratio of excess intakes of energy/fat increased toward SSB 3 group for boys and girls(p=0.0002). Ratio of calcium deficiency was not different among groups but that was very high(85.9~92.5%). Therefore, it should be emphasized to reduce SSB intakes in order to improve diversity in food group and dietary nutrient intakes among high school students through dietary education and government support.

• Journal of Korean Home Economics Education Association
• /
• v.33 no.1
• /
• pp.63-79
• /
• 2021

This study examined yearly trend of sugar-sweetened beverage(SSB) intake and compared nutritional status by SSB intake level in middle school students aged 12~14 years(n=2,543) using the data from 2007~2015 Korea National Health and Nutrition Examination Survey. SSB included carbonated drinks, sports drinks, and caffeinated drinks contained added sugar. Subjects were classified into three groups by SSB intake level obtained from 24-hour recall method: SSB 1(SSB intake 0 g/d), SSB 2(0 g/d < SSB intake < 50th percentile) and SSB 3(SSB intake ≥ 50th percentile). Result of daily intake of SSB was 76.1±6.2 g/d for boys and 59.5±4.7 g/d for girls and it was increased significantly for boys(p-trend 0.0004) and girls(p-trend 0.0038) by year. The most intakes were carbonated drinks followed by fruit juices and sports drinks for boys and girls. Percentage of daily intake compared to the dietary reference was increased for energy and iron while was decreased for calcium and vitamin C toward SSB 3 group. Ratio of excess intake of energy/fat was increased significantly for boys(p=0.0091) and girls(p<0.0001) toward SSB 3 group. Ratio of calcium deficiency was 86.8~94.9% for boys and girls and it was very high. Therefore, it should be emphasized to reduce SSB intake and drink plain water without added sugar, etc. and milk as a source of calcium for improving nutritional status of middle school students through dietary education and social support.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.927-935
• /
• 2013

Recently, bridge structures has progressed the researches about seismic performance by occurrence of earthquake increased compared with the past. In the substructure of bridge, confining transverse reinforcement has arranged in plastic hinge region to resist the lateral load which increased the lateral confining effect. Columns are increased the seismic performance through secure of the stiffness and ductility The design specification for arrangement of confining transverse reinforcement same specification of domestic and international that suggested to solid reinforced concrete column(RC). This design specification have limits for Internally Confined Hollow RC(ICH RC) column because of different the component and performance characteristics of column. In this paper suggested the modified equation for economics and rational design through investigation of displacement ductility when applied the existing specification at the steel composite hollow RC column.

• Journal of Food Hygiene and Safety
• /
• v.13 no.3
• /
• pp.294-298
• /
• 1998

The effect of gamma irradiation on the survival of spore bacteria was investigated in frozen cells ($-18^{\circ}C$) with 0.1 M phosphate buffer and inoculated cells in beef. In the case of the frozen cells at log phase, the radiation $D_{10}\;and\;12D_{10}$ values were 0.29 kGy and 3.48 kGy in Bacillus subtilis, 0.39 kGy and 4.68 kGy in Bacillus cereus and 0.46 kGy and 5.52 kGy in Clostridium perfrigens. And inactivation factors were 6.52~10.34 and 10.87~17.24 at the dosage of 3 kGy and 5 kGy, respectively. The radiosensitivity of inoculated cells in beef showed the $D_{10}$ value of 0.59~0.76 kGy, the $12D_{10}$ value of 7.08~9.12 kGy, and inactivation factors of 3.95~8.47. The radiosensitivity of the frozen cells was higher than that of inoculated cells in beef.

• Korean Journal of Food Science and Technology
• /
• v.32 no.4
• /
• pp.822-827
• /
• 2000

Gamma irradiation was applied to reduce shrimp allergy. Shrimp heat-stable protein(HSP) and shrimp protein extract were gamma-irradiated at 1, 3, 5, 7 or 10 kGy in an aqueous state (1.0 mg/mL). The changes in allergenic and antigenic properties of protein extract and HSP resulted from gamma irradiation were monitored by ELISA with mouse mAb or human patients sera and immunoblotting. Conformational changes in irradiated HSP were measured by both GPC-HPLC and SDS-PAGE. The binding ability of shrimp allergic patients IgE to irradiated protein extract or irradiated heat-stable protein was dose-dependently reduced. When measured by gel permeation chromatography and sandwich ELISA, the amount of intact heat-stable protein in the irradiated solution was reduced by gamma irradiation depending upon the applied dose. SDS-PAGE showed that the main band disappeared and new bands appeared in a higher molecular weight zone. The results provide a new possibility to use irradiation process for reducing the allergenicity of shrimp.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.145-164
• /
• 2014

Nuclear fusion is one of the most promising options for generating large amounts of carbon-free energy in the future. Major countries such as China, EU, and Japan have established a national plan for DEMO construction and they are implementing it. Korea has started a nuclear fusion research and development by the KSTAR project started in 1995. There are matured needs for a full-scale research and development initiatives to ensure competition with the major countries for DEMO as well as achieve the final goal to commercialize fusion energy. In this paper, we apply the TRL and AHP methods in order to identify the key technologies to conduct DEMO R&D. We propose the priorities of future R&D on DEMO by deriving a core technology in the field. At first, we review the scientific theory of fusion and trend of progress of DEMO activities in major countries. For previous studies, we review TRL and AHP methods to examine the technology classification system of DEMO and identify key technologies. We apply TRL method to identify readiness level of DEMO technologies and AHP to compensate shortcoming of TRL. The key technologies of DEMO to be secured from a synthesis result of the TRL and AHP are burning plasma, plasma facing material, structural material, high frequency heating, neutral particle beam, safety, plasma diagnostic, and simulation technologies.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.13 no.4
• /
• pp.283-293
• /
• 2015

The buffer is a key component of the engineered barrier system in a high-level radioactive waste (HLW) repository. The present study reviewed the requirements and functional criteria of the buffer reported in literature, and also based on the results, proposed an approach to establish a buffer concept which is applicable to an HLW repository in Korea. The hydraulic conductivity, radionuclide-retarding capacity (equilibrium distribution coefficient and diffusion coefficient), swelling pressure, thermal conductivity, mechanical properties, organic carbon content, and illitization rate were considered as major technical parameters for the functional criteria of the buffer. Domestic bentonite (Ca-bentonite) and, as an alternative, MX-80 (Na-bentonite) were proposed for the buffer of an HLW repository in Korea. The technical specifications for those proposed bentonites were set to parameter values that conservatively satisfy Korea's functional criteria for the Ca-bentonite and Swedish criteria for the Na-bentonite. The thickness of the buffer was determined by evaluating the means of shear behavior, radionuclide release, and heat conduction, which resulted in the proper buffer thickness of 0.25 to 0.5 m. However, the final thickness of the buffer should be determined by considering coupled thermal-hydraulic-mechanical evaluation and economics and engineering aspects as well.