• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.3
• /
• pp.566-571
• /
• 2011

As Plug-in Hybrid Vehicle and Electric Vehicle (PHEV/EV) take a greater share in the personal automobile market, their high penetration levels may bring potential challenges to electric utility especially at the distribution level. Thus, there is a need for the flexible charging management strategy to compromise the benefits of both PHEV/EV owners and power grid side. There are many different management methods that depend on the objective function and the constraints caused by the system. In this paper, the schema and dispatching schedule of centralized PHEV/EV charging spot network are analyzed. Also, we proposed and compared three power allocation strategies for centralized charging spot. The first strategy aims to maximize state of vehicles at plug-out time, the rest methods are equalized allocation and prioritized allocation based on vehicles SoC. The simulation results show that each run of the optimized algorithms can produce the satisfactory solutions to response properly the requirement from PHEV/EV customers.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2015

High efficiency $Cu(In,Ga)Se_2$ solar cells are generally prepared above $500^{\circ}C$. Lowering the process temperature can allow wider selection of substrate material and process window. In this paper, the three-stage co-evaporation process widely used to grow CIGS thin film at high temperature was modified to reduce the maximum substrate temperature. Below $400^{\circ}C$ the CIGS films show poor crystal growth and lower solar cell performance, in spite of external Na doping by NaF. As a new approach, Cu source instead of Cu with Se in the second stage was applied on the $(In,Ga)_2Se_3$ precursor at $400^{\circ}C$ and achieved a better crystal growth. The distribution of Ga in the films produce by new method were investigated and solar cells were fabricated using these films.

• Journal of the Korean association of regional geographers
• /
• v.15 no.5
• /
• pp.537-553
• /
• 2009

This study aims to present promotion strategies for regional industries by exploring the ways to build industrial cluster focusing on regional strategic industries of Gyeongsanbuk-do(province) which are related to innovation city, by taking Gyeongbuk innovation city as an example. This study presented the methods for linking with innovation cities that focus on regional strategic industries, along with the analysis on the linkage between regional industries and public organizations relocated to local regions. As to the methods for the linkage, methods to build clusters based on the characteristics of each industry, such as electronic information device, new material parts, biological oriental medicine, cultural tourism, eco-friendly energy, etc, which are strategic and leading industries of Gyeongsanbuk-do(province), were presented. It was inferred that the industries which have achieved fast growth such as IT and BT industries, required mutually interconnected collaboration through geographical proximity among related subjects, while sectors with mature technologies, such as automative parts, machinery, steel industries, etc, were found to require more extensive infrastructures like the support of transportation and distribution for promoting current clusters.

• Journal of Sensor Science and Technology
• /
• v.7 no.4
• /
• pp.234-242
• /
• 1998

Changes in transmission and thermoluminescent characteristics were used in order to find out the optimum growth condition of CsI single crystal scintillators which were made relatively defect-free using Czochralski method. Impurity distribution in the crystals and the intensity and number of thermoluminescent glow peaks decreased as the process of crystallization was repeated. The direction of crystal growth turned out to be (110), the crystal structure of grown CsI was bee, and its lattice constant was found to be $4.568{\AA}$. The activation energy (trap depths) of CsI:3rd was 0.45 eV and its frequency factor was $5.18{\times}10^5\;sec^{-1}$.

• Journal of Sensor Science and Technology
• /
• v.18 no.5
• /
• pp.377-384
• /
• 2009

The ultrasonic hyperthermia for oncology has been developed and studied. The HIFU(high intensity focused ultrasound) is the most recent method to treat the tumor by using ultrasound. In this study, an insertion-type transducer for treating a prostate cancer, which can focus the ultrasonic beam mechanically and electrically, was designed and developed. The developed transducer was composed of three arrays, and each array has 32 elements. For the purpose of the mechanical focusing, both side arrays are slanted to the center array by $15^{\circ}$. With this structure, NFL(near field length) was set up as 30 mm. The PZT-4 and two matching layers were used, and the backing layer was excepted to prevent energy losses. The acoustic field analysis and the heating test were performed to evaluate the performance of developed transducer. The shape of an acoustic field, peak pressure, and acoustic pressure distribution were compared with numerical simulation. The NFL was 32 mm, the beam width was 5 mm, focal area was $40\;mm^2$, and peak pressure was 5.5 MPa. With heating by using developed transducer, the temperature increased up to $33^{\circ}C$ at focal zone. As a result of this study, the usefulness of suggested transducer for prostate cancer hyperthermia was confirmed by the acoustic field analysis and the heating test with TMM(tissue mimicking) phantom.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.6 no.3
• /
• pp.205-215
• /
• 1994

A 3-dimensional numerical model of wind-induced flows has been established. and comparative evaluation of determination methods of vertical eddy viscosity has been performed. The model uses turbulence models to calculate vertical eddy viscosity. The examined methods arp 0-equation model of functional form, 1-equation model of turbulence kinetic energy, and two 2-equation models ($textsc{k}$-$\varepsilon$ and $textsc{k}$-ι models). The evaluation includes the verification tests against experimental data for wind-driven current On a closed one-dimensional channel and a recirculating one-dimensional channel. Comparative study of turbulence models has shown that the proper distribution of turbulence scale is parabolic and the eddy viscosity is depending strongly on mixing depth due to wind.

• Development and Reproduction
• /
• v.24 no.3
• /
• pp.177-185
• /
• 2020

Although many aquaporin (AQP) transcripts have been demonstrated to express in the female reproductive tract, the defined localizations and functions of AQP subtype proteins remain unclear. In this study, we investigated the expression of AQP1, AQP3, AQP5, AQP6, and AQP9 proteins in female reproductive tract of mouse and characterized their precise localizations at the cellular and subcellular levels. Immunofluorescence analyses for AQP1, AQP3, AQP6, and AQP9 showed that these proteins were abundantly expressed in female reproductive tract and that intense immunoreactivities were observed in mucosa epithelial cells with a subtype-specific pattern. The most abundant aquaporin in both vagina and uterine cervix was AQP3. Each of AQP1, AQP3, AQP6, and AQP9 exhibited its distinct distribution in stratified squamous or columnar epithelial cells. AQP9 expression was predominant in oviduct and ovary. AQP1, AQP3, AQP6, and AQP9 proteins were mostly seen in apical membrane of ciliated epithelial cells of the oviduct as well as in both granulosa and theca cells of ovarian follicles. Most of AQP subtypes were also expressed in surface epithelial cells and glandular cells of endometrium in the uterus, but their expression levels were relatively lower than those observed in the vagina, uterine cervix, oviduct and ovary. This is the first study to investigate the expression and localization of 5 AQP subtype proteins simultaneously in female reproductive tract of mouse. Our results suggest that AQP subtypes work together to transport water and glycerol efficiently across the mucosa epithelia for lubrication, proliferation, energy metabolism and pH regulation in female reproductive tract.

• Journal of Korean Society of Environmental Engineers
• /
• v.22 no.6
• /
• pp.1063-1072
• /
• 2000

Kinetic tests on pyrolysis of the mixture of waste automobile lubricating oil and polystyrene were carried out with thermogravimetric technique at the heating rates of 0.5, 1.0, $2.0^{\circ}C/min$ in a stirred batch reactor. The activation energy and the reaction order were determined at conversions of 1 to 100% using differential method. The mixture of waste automobile lubricating oil and polystyrene was pyrolyzed at lower temperature rather than waste automobile lubricating oil and polystyrene. respectively. Also, the thermal decomposition took place in two broad reaction steps. The pyrolyzed oil of mixture represented high selectivity of styrene monomer and dimer like that of polystyrene pyrolyzed products.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.59-63
• /
• 2008

The surface runoff is one of the important components for the surface water balance. However, most Land Surface Models(LSMs), coupled to climate models at a large scale for the prediction and prevention of disasters caused by climate changes, simplistically estimate surface runoff from the soil water budget. Ignoring the role of surface flow depth on the infiltration rate causes errors in both surface and subsurface flow calculations. Therefore, for the comprehensive terrestrial water and energy cycle predictions in LSMs, a conjunctive surface-subsurface flow model at a large scale is developed by coupling a 1-D diffusion wave model for surface flow with the 3-D Volume Averaged Soil-moisture Transport(VAST) model for subsurface flow. This paper describes the new conjunctive surface-subsurface flow formulation developed for improvement of the prediction of surface runoff and spatial distribution of soil water by topography, along with basic schemes related to the terrestrial hydrologic system in Common Land Model(CLM), one of the state-of-the-art LSMs.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.225-242
• /
• 2016

Rock physics serves as a useful tool for seismic reservoir characterization and monitoring by providing quantitative relationships between rock properties and seismic data. Rock physics models can predict effective moduli for reservoirs with different mineral components and pore fluids from well-log data. The distribution of reservoirs and fluids for the entire seismic volume can also be estimated from rock physics models. The first part of this report discusses the Voigt, Reuss, and Hashin-Shtrikman bounds for effective elastic moduli and the Gassmann fluid substitution. The second part reviews various contact models for moderate- to high-porosity sands. In the third part, constant-cement model, known to work well for the sand that gradually loses porosity with deteriorating sorting, was applied to the well-log data from an oil field in the North Sea. Lastly, the rock physics template constructed from the constant-cement model and the results from the prestack inversion of 2D seismic data were combined to predict the lithology and fluid types for the sand reservoir of this oil field.