• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.99-118
• /
• 2011

'Low Carbon, Green Growth' may be the achievable target in industry section, depending on whether less reliance on fossil-fuels use can bring higher productivity growth in the long run. This paper tests for the short-run and long-run effects of investment on energy-saving equipments on productivity growth in the Korean manufacturing industries. The investment in energy efficiency causes an increase in costs (measurement effect) in the short-run, but in the long-run likely improve energy intensity and reduce costs (positive real effect) despite the delay in new other investment for technical innovation (negative real effect). A 2SLS regression was attempted to deal with endogeneity of energy-saving investment. The productivity effects were tested for five manufacturing sub-industries showing relatively high energy intensity with annual time series data from 1982 through 2006. No productivity effects were accepted for all five sub-industries except Chemical products. Positive real effect was considered to be exceeded by negative real effect, resulting in decreased productivity growth for Chemical products.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.2
• /
• pp.33-41
• /
• 2019

The purpose of this study is to provide a basic data for energy efficient apartment designs by analyzing electricity and gas usage according to horizontal locations of dwelling units in apartment buildings. The data for this research are collected from J-apartment complex, located at 'Wolbae' district in Daegu City. The data are sorted into several groups according to inner and outer locations, East-West locations, and the size of units. By the performance efficiency analysis, the study derives the result as follows: 1) generally inner units are more efficient than outer units. 2) West units are more efficient than East units. 3) The group that is most efficient in overall energy consumption is West-inner units (Group-D) and the least efficient group is East-outer units (Group-A1). 4) However, as units are getting bigger, inner units consumes more energy than outer units because of the gas usage patterns. The study also established cost analysis that shows the cost differences of usages for 30, 40, 50 years between each group. The result says Inner-outer location with East-West location affects a significant amount of the management costs. In terms of economic and social life of an apartment building, energy design standards need to be tuned and make the least efficient units perform as efficient as the most efficient units to optimize the social life of an apartment building.

• The Journal of the Korea Contents Association
• /
• v.22 no.7
• /
• pp.187-201
• /
• 2022

This study analyzed the dynamic changes in the energy poverty structure of all households, elderly households, and single-person households in Korea. To this end, a TIP curve was derived and the focus was on changes in energy poverty intensity and poverty incidence. For the data, annual and quarterly data on fuel costs from the National Statistical Office's Household Income and Expenditure Survey were used. And the results were presented using data from the first quarter, where the energy poverty problem can be prominent due to the high proportion of heating costs among the four quarters. As a result of the analysis, there was no clear improvement in poverty intensity and poverty incidence over time in the analysis of all households. However, the analysis of elderly and single-person households showed improvement in poverty intensity and poverty incidence over time. In particular, in the results of the analysis using the data for the first quarter, the poverty intensity and poverty incidence of elderly and single-person households improved remarkably. In addition, the poverty intensity and poverty incidence of the elderly and single-person households were larger than the all households, and the energy poverty of single-person households was more severe than that of the elderly households.

• Journal of the Korean Solar Energy Society
• /
• v.26 no.3
• /
• pp.119-125
• /
• 2006

The impacts of climate changes on building energy demand were investigated by means of the degree-days method. Future trends for the 21st century was assessed based on climate change scenarios with 7 global climate models(GCMs). We constructed hourly weather data from monthly temperatures by Trnsys 16. A procedure to estimate heating degree-days (HDD) and cooling degree-days (CDD) from monthly temperature data was developed and applied to three scenarios for Inchon. In the period 1995-2080, HDD would fall by up to 70%. A significant increase in cooling energy demand was found to occur between 1995-2004(70% based on CDD). During 1995-2080, CDD would Increase by up to 120%. Our analysis shows widely varying shifts in future energy demand depending on season. Heating costs in winter will significantly decrease whereas more expensive electrical cooling energy will be needed.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.4
• /
• pp.34-40
• /
• 2011

Apartment Housing has been increasing steadily, particularly our current super high-rise apartment houses that represent the culture has become a trend in Korea. These super high-rise apartment houses' curtain wall system increases heating and cooling loads, it is expected to vary by each unit's thermal properties. In this study, measured indoor environment and energy simulation results were compared to actual energy consumption. As a result, the various factors that affect heating and cooling loads, such as direction, plan type and glazing area, influence each unit's load characteristic. In particular, according to the electricity costs savings behavior, the occupant's thermal discomfort is expected to be large in summer. Therefore, to reduce heating and cooling load for each unit requires a reasonable plan.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.6
• /
• pp.2781-2798
• /
• 2019

Thanks to internet, as one of indispensable parts of our lives, many devices that we use in our daily lives like TV, air conditioner, refrigerator, washing machine, can be monitored and controlled remotely by becoming more intelligent via Internet of Things (IoT) technology. Smart Home applications as one of the elements of smart cities, are individually the most demanded application without question. In this study, Smart Energy Management (SEM) system, based on NodeMCU and Android, has been designed for SEM, which is a part of the smart home application. With this system, household energy consumption can be monitored in real time, as well as having the ability to record the data comprising of operation times and energy consumption information for each device. Additionally, it is ensured to meet the energy needs on a maximized level possible, during the hours when the energy costs are lower owing to the SEM system. The Android interface provides the users with the opportunity to monitor and change their electricity consumption habits in order to optimize the energy efficiency, along with the opportunity to draw up of a daily and weekly schedule.

• Electronics and Telecommunications Trends
• /
• v.38 no.2
• /
• pp.26-35
• /
• 2023

Energy efficiency is an important factor toward sustainable future mobile network systems. As the size of the 5G mobile network system increases, the consumption and costs of energy increase. Accordingly, energy-saving optimization has become a major process in network systems, and various related technologies for energy saving are being developed. We provide a brief review of the technical trends in energy saving in 3GPP 5G & 5G Advanced systems and O-RAN systems. We focus on power models and energy-saving technologies in various resource domains of 3GPP 5G & 5G Advanced systems and energy-saving use cases of O-RAN systems.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1157-1163
• /
• 2008

Fuel represents a significant portion of the operating costs of voyages of the vessel. Under this situation, dramatic increase in fuel price caused a problem that earnings of ship becomes decreased seriously. Pumps in a cooling system of the vessel are often operated inefficiently. The reasons will vary from process to process and application to application. Inefficiency of pumps is one of the reason for making the cost of operating the vessel increased. This paper suggests energy-effective cooling system that controls sea water pumps with inverters to reduce energy consumption in vessel by conducting simulation with LabVIEW. Results shows that electric energy consumption of pumps are significantly deceased. If this energy-effective cooling system is applied to other systems which need cooling, it could be useful in reducing electric energy wastage.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.486-492
• /
• 2013

Energy cost has been increasing rapidly to comply with environmental regulations worldwide and the manufacturing industry who consumes more than half of the total energy needs to improve their cost competitiveness considering environmental costs. Machine tools are essential elements in manufacturing industry and efforts have been made recently to increase their energy efficiency mainly by German and Japanese machine tool builders. In this paper, trends in energy saving technology are described on the hardware and software sides of peripheral equipment of machine tools. In addition, the power consumption of a machining center is measured and analyzed to develop a software-based standby strategy for energy saving with peripheral equipment of machine tools.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1165_1166
• /
• 2009

In recent years, energy prices have soared, which of course have increased costs for railway operators. Simultaneously, the energy market has considerably changed that in most developed countries, it is deregulated, giving railway operators an opportunity to define new ways of using energy. Efficient operation of the railway system is considered as an essential way to energy saving while an efficient management of power level helps to lower the reference subscribed power, giving access to better energy rates. It is studied on the relation between time and force for the energy efficient driving of train in railway when the train is braking according to several slips.