• Journal of the Korean Society of Food Science and Nutrition
• /
• v.42 no.11
• /
• pp.1753-1758
• /
• 2013

A debate over the association between dietary patterns and obesity is not settled in the literature. Some studies suggest that there are significant differences in the mean body mass index (BMI) across dietary patterns, while others refute the result. Therefore, we extended this line of study to examine whether the influence of dietary pattern is strong enough to affect the incidence of obesity based on the criterion, BMI=25. We identified 3 dietary patterns using a cluster analysis of food intake data obtained from the food frequency survey conducted as a part of Korean genome epidemiologic study: 'variety', 'unrefined grain', and 'rice' dietary patterns. A Cox Hazard regression result showed that the all the dietary pattern variable parameters were not significant. Hence, it was concluded that the dietary patterns do not affect the incidence of obesity under the control of variables, such as age, energy intake, and etc.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.3
• /
• pp.521-527
• /
• 2002

In this paper, tensile behavior and low cycle fatigue behavior of 316L stainless steel which is currently favored structural material for several high temperature components such as the liquid metal cooled fast breeder reactor (LMFBR) were investigated. Research was performed at 55$0^{\circ}C$, $600^{\circ}C$ and $650^{\circ}C$ since working temperature of 316L stainless steel in a real field is from 40$0^{\circ}C$ to $650^{\circ}C$. From tensile tests performed by strain controls with $1{\times}10^{-3}/s,\; l{\times}10^{ -4}/s \;and\; 1{\times}10/^{ -5}/ s $ strain rates at each temperature, negative strain rate response (that is, strain hardening decreases as strain rate increases) and negative temperature response were observed. Strain rate effect was relatively small compared with temperature effect. LCF tests with a constant total strain amplitude were performed by strain control with a high temperature extensometer at R.T, 55$0^{\circ}C$, $600^{\circ}C$, $650^{\circ}C$ and total strain amplitudes of 0.3%~0.8% were used and test strain rates were $1{times}10^{-2} /s,\; 1{times}10^{-3} /s\; and\; 1{times}10^{-4} /s$. A new energy based LCF life prediction model which can explain the effects of temperature, strain amplitude and strain rate on fatigue life was proposed and its excellency was verified by comparing with currently used models.

• Plant Biotechnology Reports
• /
• v.4 no.3
• /
• pp.201-211
• /
• 2010

We present a highly effective T-DNA inserted gene screening method as part of a reverse genetics model system using the Chinese cabbage (Brassica rapa L. spp. pekinensis). Three-step two-dimensional (2D) matrix strategies are potentially accurate and useful for the identification of specific T-DNA inserted mutants from a large population. To construct our Chinese cabbage model, we utilized a forward genetics screening approach for the abnormal phenotypes that were obtained from transgenic plants of Brassica rapa generated with Agrobacteria tumefaciens containing the pRCV2 vector. From one transgenic plant with an abnormal phenotype, we observed that the st1 gene (which is related to senescence-associated process proteins) contained a T-DNA fragment, and that its expression level was decreased. This T-DNA insert was then used as a control to construct an effective screening pool. As a result, the optimum template concentration was found to be 0.1-1 ng in our PCR strategy. For other conditions, positive changes to the Gibbs free energy prevented the formation of oligo dimers and hairpin loop structures, and autosegment extension gave better results for long fragment amplification. Using this effective reverse genetics screening method, only 23 PCR reactions were necessary to select a target gene from a pool of 100 individual DNAs. Finally, we also confirmed that the sequence we obtained from the above method was identical to the flanking sequence isolated by rescue cloning.

• Explosives and Blasting
• /
• v.34 no.4
• /
• pp.10-18
• /
• 2016

Explosive blasting utilizes the energy produced from the explosion of explosive materials. Since the black powder, the first type of explosive, was invented, various types of explosives have been developed until a recent emulsion explosive which is powerful as well as safe in use. The detonators continue to be developed from safety fuse to the recent electronic detonators which allow extremely accurate and flexible control of delay time. However, the good explosives and detonators do not always lead to the good blast results. It entirely depends on the blast engineer. It is necessary to develop the empirical or theoretical models based on the field experience and sound theoretical algorithm. Such models would be very useful for blast design and, furthermore, provide the idea of further technical development. This paper introduces some models used in explosive blasting and attention to be paid for field application.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.4
• /
• pp.435-442
• /
• 2011

In an attempt to respond to the increase in international oil prices and reduce operating expenses, ship remodeling was carried out on a 740ton class tuna purse seiner. To strengthen the competitiveness of the fisheries industry by improving vessel performance, a bulbous bow was newly equipped. The slipway and rudder area were also lengthened and enlarged with the propeller and main engine remained unchanged. To reduce the hull resistance, a circle type bulbous bow was attached on the hull behind bow thruster and thus the cost for exchanging electrical equipment for bow thruster was reduced. The new rudder area was expanded 15% more than the old one within the extent that the existing mechanical control part and rudder stock were not changed. To prevent fishing net damage and stabilize wake field, slipway was lengthened to the optimal position. All of the new design of remodeling parts went through the model tests in towing tank and CWC. Besides resistance test, all of necessary model test results were delivered for hydrodynamic character for the modified ship. The maneuvering simulation to verify that the remodeled ship satisfies the IMO rules was performed in both zigzag and turning tests. The estimated resistance with new bulbous bow and lengthened stern was reduced by 4.8% in the 2-dimensional analysis and 17.4% in the 3-dimensional analysis in comparison of conventional ship. The average reduction of resistance was estimated about 10%. Maneuvering character of modified hull form was found to satisfy all regulations under IMO. The remodeling of tuna purse seiner can not only improve fishing performance but also contribute to reduction of operating cost by saving energy for the fisheries industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.11
• /
• pp.1495-1503
• /
• 2009

This experiment was conducted to determine the effect of dietary supplementation with BCAA (branched-chain amino acids: leucine, isoleucine and valine) on improving the growth of rats in a malnutritional IUGR (Intrauterine Growth Retardation) model, which was established by feeding restriction. In the experimental treatment, rats were fed purified diets supplemented with BCAA (mixed) during the whole gestation period, while arginine and alanine supplementation were set as the positive and negative control group, respectively. The results showed that, compared to the effect of alanine, BCAA reversed IUGR by increasing the fetus weights by 18.4% and placental weights by 18.0% while fetal numbers were statistically increased. Analysis of gene and protein expression revealed that BCAA treatment increased embryonic liver IGF-I expression; the uterus expressed higher levels of estrogen receptor-$\alpha$ (ER-$\alpha$) and progesterone receptor (PR), and the placenta expressed higher levels of IGF-II. Amino acid analysis of dam plasma revealed that BCAA supplementation effectively enhanced the plasma BCAA levels caused by the feed restriction. BCAA also enhanced the embryonic liver gluconeogenesis by augmenting the expression of two key enzymes, namely fructose-1,6-biphosphatase (FBP) and phosphoenolpyruvate carboxykinase (PEPCK). In conclusion, supplementation of BCAA increased litter size, embryonic weight and litter embryonic weight by improving the dam uterus and placental functions as well as increasing gluconeogenesis in the embryonic liver, which further provided energy to enhance the embryonic growth.

• Membrane Journal
• /
• v.26 no.1
• /
• pp.55-61
• /
• 2016

Organic fouling observed in submerged membrane filtration as a pretreatment for seawater desalination increases energy consumption for membrane operation because of requiring frequent chemical cleaning and membrane replacement. In membrane pretreatment for seawater facing with algae blooms, membrane fouling was observed in submerged microfiltration using sodium alginate model compound which is one of the main components of extracellular polymeric substances. Without aeration, aglinate fouling increased with its concentration while aeration reduced the alginate fouling effectively regardless of its concentration tested. In the absence of aeration, alingate fouling tended to be decreased with increasing calcium concentration. However, this effectiveness was reduced by increasing sodium chloride concentration. At high concentration of sodium chloride and calcium similar to the seawater conditions, aeration reduced initial fouling. However, as time progressed, the effect of increased airflow rate on fouling reduction was not significant, implying that optimum airflow rate to control alginate fouling in submerged microfiltration can exist.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.385-390
• /
• 2005

LMTT (Linear Motor-based Transfer Techn-ology) is a horizontal transfer system for the yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle) in the maritime container terminal. The system is based on PLMSL (Permanent Magnetic Linear Synchronous Motor) that consists of stator modules on the rail and shuttle car. It is desirable to reduce the weight of LMTT in order to control the electronic devices with minimum energy. In this research, the DACE modeling, known as the one of Kriging interpolation, is introduced to obtain the surrogate approximation model of the structural responses. Then, the GRG(Generalized Reduced Gradient) method built in Excel is adopted to determine the optimum. The objective function is set up as weight. On the contrary, the design variables are considered as transverse, longitudinal and wheel beam's thicknesses, and the constraints are the maximum stresses generated by four loading conditions.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.3
• /
• pp.324-333
• /
• 2012

The conventional medium and large caliber gun, in general, utilize the hydro-pneumatic recoil mechanism to control the firing impulse and to return to the battery position. However, this kind of mechanism may cause the problems like the leakages and the property changes in oil and gas due to the temperature variations between low and high temperatures. Accordingly, the friction spring mechanism has recently been researched as an alternative system. The friction spring mechanism consists of a set of closed inner and outer rings with the concentric tapered contact surfaces assembled in the columnar form, and can only be used under the compression load. When the spring column is axially loaded, the tapered surfaces become overlapped, causing the outer rings to expand while the inner rings are being contracted in diameter allowing an axial displacement. Because of friction between tapered contact surfaces, much higher spring stiffness is obtained on the stroke at the increase in load than the stroke at the decrease. In this paper, the dynamic equations regarding the friction spring system and the design approach have been investigated. It is also tried for a dynamic model representing the recoil motion and the friction spring forces. And the model has been proved from firing test using a gun system with friction springs. All the results show that the recoil mechanism using friction springs can substitute for the classic hydro-pneumatic recoil system.

• Korean Journal of Microbiology
• /
• v.45 no.1
• /
• pp.10-16
• /
• 2009

A diverse range of stresses such as heat, cold, salt, ethanol, oxygen starvation or nutrient starvation induces same stress-responsive proteins. This general stress response enhances bacterial survival significantly. In Bacillus subtilis and closely related Gram-positive bacteria Listeria monocytogenes, the general stress response is controlled by the alternative transcription factor ${\sigma}^B$. The activity of ${\sigma}^B$ is regulated post-translationally by a signal transduction network that has been extensively studied in B. subtilis, and serve as a model for L. monocytogenes. The proposed model of L. monocytogenes signal transduction network is similar to that of B. subtilis, but the energy stress pathway is missing. More than 150 general stress proteins belong to ${\sigma}^B$ regulon of B. subtilis and L. monocytogenes. In both bacteria, ${\sigma}^B$ function is primarily important for resistance to diverse stresses. In addition, ${\sigma}^B$ function contributes to the control of important virulence genes in food-borne pathogen L. monocytogenes. Therefore, understanding of the general stress response is important not only for bacterial physiology, but also for pathogenicity.