• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.2
• /
• pp.700-713
• /
• 2015

It is critical to design energy-efficient routing protocols for battery-limited mobile ad hoc networks, especially in which the energy-consuming MIMO techniques are employed. However, there are several challenges in such a design: first, it is difficult to characterize the energy consumption of a MIMO-based link; second, without a careful design, the broadcasted RREP packets, which are used in most energy-efficient routing protocols, could flood over the networks, and the destination node cannot decide when to reply the communication request; third, due to node mobility and persistent channel degradation, the selected route paths would break down frequently and hence the protocol overhead is increased further. To address these issues, in this paper, a novel Greedy Energy-Efficient Routing (GEER) protocol is proposed: (a) a generalized energy consumption model for the MIMO-based link, considering the trade-off between multiplexing and diversity gains, is derived to minimize link energy consumption and obtain the optimal transmit model; (b) a simple greedy route discovery algorithm and a novel adaptive reply strategy are adopted to speed up path setup with a reduced establishment overhead; (c) a lightweight route maintenance mechanism is introduced to adaptively rebuild the broken links. Extensive simulation results show that, in comparison with the conventional solutions, the proposed GEER protocol can significantly reduce the energy consumption by up to 68.74%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.3
• /
• pp.137-145
• /
• 2015

In this study, the actual energy consumption of the secondary side of District Heating System (DHS) with different hot water supply temperature control methods are compared. Three methods are Set-point Control, Outdoor Temperature Reset Control and Outdoor Temperature Prediction Control. While Outdoor Temperature Reset Control has been widely used for energy savings of the secondary side of the system, the results show that Outdoor Temperature Prediction Control method saves more energy. In general, Outdoor Temperature Prediction Control method lowers the supply temperature of hot water, and it reduces standby losses and increases overall heat transfer value of heated spaces due to more flow into the space. During actual energy consumption monitoring, Outdoor Temperature Prediction Control method saves about 7.1% in comparison to Outdoor Temperature Reset Control method and about 15.7% in comparison to Set-point Control method. Also, it is found that at when partial load condition, such as daytime, the fluctuation of hot water supply temperature with Set-point Control is more severe than Outdoor Temperature Prediction Control. Therefore, it proves that Outdoor Temperature Prediction Control is more stable even at the partial load conditions.

• Journal of Korea Multimedia Society
• /
• v.10 no.7
• /
• pp.893-901
• /
• 2007

Since real-time multimedia applications requiring duality-of-service guarantees are spreading over mobile and wireless networks, energy efficiency in wireless channels is becoming more important. Energy consumption in the channels can be reduced with decreasing the rate of scheduler's outgoing link by means of Dynamic Modulation Scaling (DMS). This paper proposes a fair queuing algorithm, termed Rate Efficient Fair Queuing (REFQ), in order to reduce the outgoing link's rate, which is based on the Latency-Optimized Fair Queuing algorithm developed to enhance Weighted Fair Queuing (WFQ). The performance evaluation result shows that REFQ does decrease the link rate by up to 35% in comparison with that in WFQ, which results in reducing the energy consumption by up to 90% when applied to the DMS based radio modem.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.55-62
• /
• 2007

Uptime of embedded processors for mobile devices are dependent on battery consumption. Especially the large portion of power consumption is known to be due to cache management in embedded processors. This paper proposes an energy efficient data cache structure for high performance embedded processors. High performance prefetching data cache issues prefetching instructions before issuing demand-fetch instructions based on reference predictions. These prefetching instruction bring reduction on memory delay by improving cache hit ratio, but on the other hand those increase energy consumption in proportion to the number of prefetching instructions. In this paper, we adopt tag history table on prefetching data cache for reducing energy consumption by minimizing parallel tag comparison. Experimental results show the proposed data cache improves performance on energy consumption as well as memory delay.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.1
• /
• pp.88-93
• /
• 2005

In this study, the operational characteristics on heating performance and energy consumption for intermittent hot water heating system in apartment buildings were research by simulation. The effects of apartment inlet hot water temperature and operation time per day on energy consumption and indoor thermal environment are investigated. The strategy of energy saving and thermal environment improvement is suggested in comparison with the existing ones.

• Environmental and Resource Economics Review
• /
• v.19 no.1
• /
• pp.129-157
• /
• 2010

This paper is intended to evaluate energy efficiency policy in demand side, to assess the residential sector's energy efficiency policy and to analyze the system of energy efficiency practices. We examined residential energy consumption over the period 1990~2006. The decomposition method in the analysis was a logarithmic mean Divisia index (LMDI) techniques to decompose changes in energy intensity. First of all, the energy use in residential sector was adjusted to correct weather-induced variations in energy consumption, because adjustments for normal weather patterns facilitated inter-temporal comparison of intensity. The analysis on the residential sector shows that the overall energy intensity of the residential sector declined at an average 1.0% per year, while the structure effect increased by 1.8% per year, and the activity effect increased by 0.7% per year. In other words, the decline of floor space, number of household, and appliance ownership per capita has an effect on increase in residential consumption. The improvement in energy efficiency had strong contribution on the decrease of energy consumption. We find that the general results of analysis on residential energy are similar to those of IEA. The energy efficiency policy in residential sector is assessed to obtain some results during 1990~2006. In residential sector, structural variables such population per household, diffusion of appliance and activity factor such as population contributed to the increase of energy consumption while energy intensity effect induced the decrease of energy consumption. These findings are consistent with international trend as well as our prior expectation.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.8 no.3
• /
• pp.27-35
• /
• 1994

As a study on the method for energy-saving of the neon sign, this paper has systematically investigated the quantity of energy-consumption of the sign through a long period of time, according to the changes of the sign's ON/OFF speed, time ratio, etc. One neon sign(1 [kW] was built up for this. For this experiment, the ON/OFF periods(T) were set to 1.0,2.0,4.0 and 8.0[sec), and the ON time ratios(D) to 25, 50, 75 and 100 [%] respectively. Energy Analyzer was used for more accurate measurement. As the result, we found that the energy consumption of the sign had no effect on the ON/OFF period (T) when T was more than 2.0(sec), but that the energy consumption was decreasing when T was less than 2.0[sec]. The greatest value in the energy-saving of the sign appeared when the values of T and D were small altogather. And under the conditions, the energy consumption with T=1.0[sec) and D= 25[%] decreased 83.0[%] in comparison with the continuous ON case.

• Smart Media Journal
• /
• v.5 no.4
• /
• pp.41-48
• /
• 2016

In mobile ad hoc networks(MANETs), all the nodes in a network have limited resources. Therefore, communication topology which has long lifetime is suitable for nodes in MANETs. And MANETs are exposed to various threats because of a new node which can join the network at any time. There are various researches on security problems in MANETs and many researches have tried to make efficient schemes for reducing network power consumption. Power consumption is necessary to secure networks, however too much power consumption can be critical to network lifetime. This paper focuses on energy efficient monitoring node distribution for enhancing network lifetime in MANETs. Since MANETs cannot use centralized infrastructure such as security systems of wired networks, we propose an efficient IDS node distribution scheme using minimum spanning tree (MST) method to cover all the nodes in a network and enhance the network lifetime. Simulation results show that the proposed algorithm has better performance in comparison with the existing algorithms.

• Journal of Environmental Science International
• /
• v.31 no.4
• /
• pp.319-328
• /
• 2022

This study investigated the treatment of acetaminophen in municipal wastewater by conventional ozonation, ozone-based advanced oxidation, ozone/UV, and the electro-peroxone process. The ozone/UV process and electro-peroxone process of electric power consumption increased 1.25 and 2.04 times, respectively, compared to the ozone process. The pseudo-steady OH radical concentration was the greatest in the electro-peroxone process and lowest in the ozone process. The specific energy consumption for TOC decomposition of the ozone/UV process and electro-peroxone process were 22.8% and 15.5% of the ozone process, respectively. Results suggest that it is advantageous in terms of degradation performance and energy consumption to use a combination of processes in municipal wastewater treatment, rather than an ozone process alone. In combination with the ozone process, the electrolysis process was found to be more advantageous than the UV process.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.919-924
• /
• 2008

Power consumption in the building thermal load could be the sum of the building fabric conduction load, building ventilation convection load and other such as radiation loss load. Dynamic Breathing Building (DBB) is the state-of-the-art to improve the wall insulation and indoor air quality(IAQ) performance as making air flow through the wall. This heat recovery type DBB contributes the power consumption saving due to the improved dynamic U-value. KIER twin test cell with static insulation(SI) and dynamic insulation(DI) at KIER was developed to test building power consumption at the real outside conditions. Then, the actual results were compared with the theory to predict the power consumption at the KIER twin test cell and introduced the building new radiation loss factor $\alpha$ to explain the difference between the both the theory and the actual case. As the results, the power consumption at the breathing DI wall building could saved 10.8% at the 2ACH(Air change per hour) compared with conventional insulation. The building radiation loss factor $\alpha$ for this test condition to calibrate the actual test was 0.55 in the test condition.