• Architectural research
• /
• v.16 no.1
• /
• pp.9-16
• /
• 2014

Allergic diseases as the major symptoms of Sick Building Syndrome have significantly increased because of the indoor pollutants resulted from the enhanced energy conservation performances of residential buildings. Following traffic accidents, domestic accidents are known as the second most frequent accident type. This study analyzes the occurrences of allergic diseases and home accidents caused by housing conditions, together with the residents' consciousness of the diseases and accidents. The findings of this study are expected to help develop the design guidelines and new housing types conducive to the healthy housing environment. For this study, a questionnaire survey was conducted in two rounds which include face-to-face questionnaire survey and online survey, collecting 200 responses and 1000 responses respectively. The data based on the valid 1011 responses were analyzed by Frequency Analysis and T-test.

• Advances in concrete construction
• /
• v.14 no.3
• /
• pp.215-225
• /
• 2022

Thermal comfort and energy conservation are critical issues in the building sector. Energy consumption in the building sector should be reduced whilst enhancing the thermal comfort of occupants. Concrete is the most widely used construction material in buildings. Its thermal conductivity (k-value) has a direct effect on thermal comfort perception. This study aims to find the optimum value of replacing the normal aggregate with lightweight expanded clay aggregate (LECA) under high strengths and low thermal conductivity, density and water absorption. The k-value of the LECA concrete and its physical and mechanical properties have varying correlations. Results indicate that the oven-dry density, compressive strength, splitting tensile strength and k-value of concrete decrease when normal coarse aggregates are replaced with LECA. However, water absorption (initial and final) increases. Thermal conductivity and the physical and mechanical properties have a strong correlation. The statistical optimisation of the experimental data shows that the 39% replacement of normal coarse aggregate by LECA is the optimum value for maximising the compressive and splitting tensile strengths whilst maintaining the k-value, density and water absorption at a minimum.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.38-47
• /
• 2000

Carbon dioxide is a major greenhouse gas causing climate change. This study quantified annual direct and indirect uptake of carbon by urban greenspace, and annual carbon release from vegetation maintenance and fossil fuel consumption. The study area was whole Chuncheon and Kangleung, and also two districts of Kangnam and Junglang in Seoul, cities located in middle Korea. Carbon uptake by urban greenspace played an important role through offsetting carbon release by 6-7% annually in Chuncheon and Kangleung. For Kangnam and Junglang, where the population density was relatively higher, urban greenspace annually offset carbon release by 1-2%. Future possible tree plantings could double annual carbon uptake by existing trees in urban lands (except natural and agricultural lands) of a study city. Based on study results, planning and management guidelines for urban greenspace were suggested to save energy and to reduce atmospheric $CO_2$ concentrations. They included selection of optimum tree species, proper planting location from buildings, design of multilayered planting, amendment of existing regulations for greenspace enlargement, avoidance f intensive vegetation maintenance, and conservation of natural vegetation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.39.2-39.2
• /
• 2011

The new and renewable energy today has a great interest in all countries around the world. In special it has need more limit of the fossil fuel that needs of low carbon emission among the social necessary conditions. Recently, the high-rise building demand the structural safety, the economic feasibility and the functional design. The high-rise building spends enormous energy and it satisfied the design in solving energy requirements. The requirements of energy for the building depends on the partly form wind energy due to the cladding of the building that came from the surroundings of the high-rise building. In this study of the wind energy, the cladding of the building was assessed a tentative study. The wind energy obtains from several small wind powers that came from the building or the surrounding of the building. In making a cladding the wind energy forms with wind pressure by means of energy transformation methods. The assessment for the building cladding was surrounded of wind speed and wind pressure that was carried out as a result of numerical simulation of wind environment and wind pressure which is coefficient around the high-rise building with the computational fluid dynamics. In case of the obtained wind energy from the pressure of the building cladding was estimated by the simulation of CFD of the building. The wind energy at this case was calculated by energy transform methods: the wind pressure coefficients were obtained from the simulated model for wind environment using CFD as follow. The concept for the factor of $E_f$ was suggested in this study. $$C_p=\frac{P_{surface}}{0.5{\rho}V^{2ref}}$$ $$E_c=C_p{\cdot}E_f$$ Where $C_p$ is wind pressure coefficient from CFD, $E_f$ means energy transformation parameter from the principle of the conservation of energy and $E_c$ means energy from the building cladding. The other wind energy that is $E_p$ was assessed by wind power on the building or building surroundings. In this case the small wind power system was carried out for wind energy on the place with the building and it was simulated by computational fluid dynamics. Therefore the total wind energy in the building was calculated as the follows. $$E=E_c+E_p$$ The energy transformation, which is $E_f$ will need more research and estimation for various wind situation of the building. It is necessary for the assessment to make a comparative study about the wind tunnel test or full scale test.

• Environmental Engineering Research
• /
• v.18 no.2
• /
• pp.65-69
• /
• 2013

Despite the most severe weather and geological conditions, Korean people in earlier times were successful in maintaining sustainable water supplies because they understood the importance of rainwater management, and developed technologies and a philosophy which were needed to live under such circumstances. Recently, the Korean people have suffered frequent incidence of flood damage and drought, and have gradually started to remind themselves of the lessons of the past, which can be described as proactive, multipurpose rainwater management. Most of the problems associated with water and energy can be solved by the integration of rainwater management practices. The concept of multipurpose rainwater management and two examples of its practice are discussed. One is a design for a multipurpose rainwater tank which has been used in a building project, and is based on Korean philosophy. Secondly, a regulation was promulgated recently in Seoul that requires the building of rainwater tanks in new buildings over a certain size. The primary purpose is for the prevention of flooding, but water conservation is a secondary intention. Two examples of proactive rainwater management are discussed, one being public involvement in rainwater management, and the second being the rainwater piggy bank microcredit project. In order to maintain sustainability, to meet the requirements of the Millennium Development Goals, and to be prepared for the effects of climate change, it is expected that multipurpose and proactive rainwater management will be a very effective approach for both developing countries and developed countries. A worldwide network of scientific researchers, as well as a great number of professions, has suggested the promotion of rainwater management.

• Korean Institute of Interior Design Journal
• /
• v.20 no.2
• /
• pp.3-9
• /
• 2011

In this study, the change of critical elements of the design evaluation was investigated during two decades at the architectural competition which was held nationwide in Germany. Specifically, the periods of investigation span both from July 1989 to June 1990 and from July 2009 to June 2010. The results of the analysis show that the cost of construction, the maintenance cost, the design of facade and the energy conservation are being magnified for the new important elements. The images of buildings and the economic aspects are meant to be high. The frequency of the critical elements for interior spaces is approximately two times more important than those for the forms and outdoor spaces. Overall, many juries of the architectural competition in Germany were interested in the elements for interior spaces. The field of function accounts for roughly the half of four basic architectural fields such as function, others, aesthetic and construction fields. The critical elements are required persistently such as context, Circulation, organization of space, form, landscape and outdoor space design, arrangement of building, cost of construction, function, design of facade, location of main entrance. These items are regarded as the most important elements of the design evaluation at the competition. Knowing the change of critical elements of the design evaluation, we can understand the trend of architecture in Germany. The results of this study can be applied in Korea to develop the critical elements of design.

• Journal of the Korean Institute of Rural Architecture
• /
• v.24 no.1
• /
• pp.9-17
• /
• 2022

Rural spaces are increasingly valuable as areas for introducing renewable energy infrastructure to achieve carbon neutrality. Rural areas are the living grounds of rural residents, and the balance of conservation and development for rural areas is important for the introduction of reasonable facilities. In order to maintain a balance between development and preservation and to introduce reasonable renewable energy facilities, it is necessary to develop a current status survey and an effective survey method to utilize a space capable of introducing renewable energy facilities such as idle land and vacant houses. Therefore, this study was conducted to verify the readability using an unmanned aerial vehicle, and the main results are as follows. The detection of photovoltaic power generation facilities using unmanned aerial vehicles was effective in analyzing the location and area of photovoltaic panels located on the roofs of buildings, and it was possible to calculate the expected power generation by region through the area calculation of photovoltaic panels. The vacant house detection can be used to select an investigation target for an vacant house condition survey as it can identify damage to buildings that are expected to be empty houses, management status, and electricity supply facilities through aerial photos. It is judged that the unmanned aerial vehicle detection capability can be utilized as a method to improve the efficiency of investigation and supplement the data related to solar power generation facilities and vacant houses provided by public institutions. Although this study detected the status of solar power generation facilities and vacant houses through high-resolution aerial image analysis, as a follow-up study, automatic measurement methods using the temperature difference of solar power generation facilities and general characteristics of vacant houses that can be read from the air were investigated. If the deriving research is carried out, it is judged that it will be possible to contribute to the improvement of the accuracy of the detection result using the unmanned aerial vehicle and the expansion of the application range.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.364-369
• /
• 2007

A system heat pump provides the benefits of comfort, energy conservation and easy maintenance. Recently, the system heat pump has been employed in small and medium-sized buildings. However, the performance data and control algorithm for system heat pump are limited in literature due to complicated system parameters and operating conditions. In the present study, the performance of a system heat pump with two indoor unit is measured by varying indoor loads, EEV opening, and compressor speed. In addition, the integral optimum regulator which includes MIMO control algorithm is proposed. The capacity modulation and optimum capacity for each indoor unit can be adjusted by utilizing the EEVs opening and compressor speed. The proposed scheme shows appropriate control performance at test conditions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.11
• /
• pp.806-812
• /
• 2012

Air curtains are widely used in commercial and public buildings to replace solid doors where traffic of people is predicted. At doorways where the solid door is open continuously or intermittently, an air curtain may be installed in order to reduce the flow of heat and moisture from the enclosed space to the outside. The purpose of this paper is to predict isolation performance of the single-sided air curtain when the wind is blowing. For the study, a numerical simulation is used to find the influence of various jet velocities on the efficiency of the single-sided air curtain device which is mounted at the side of the doorway. The isolation performance of the single-sided air curtain is evaluated by sealing efficiency which provides the assessment of the infiltration air ratio. According to the result of this study, the single-sided air curtain has lower sealing efficiency than downward-blowing air curtain. Therefore, for energy conservation in heating space, the single-sided air curtain is not recommended because of its low effectiveness.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.161-166
• /
• 2007

Various thermostatic valves have been used widely in Korea for conservation of heating energy and enhancement of thermal comfort in residential buildings. But heating control performances of thermostatic valves extensively vary with the design and operational conditions of the heating system, climate condition and others. An experimental method was carried out in this study to analyze heating control characteristics by temperature sensing methods of thermostatic valves for various parameters, such as supply temperatures and flow rate of hot water, the position of room thermostats and outdoor air temperatures. As a result, the heat flow rate per day of S-Valve($34^{\circ}C$-Type) of water temperature sensing method was liked that of C-Valve of indoor air temperature sensing method with stage 3.3 of room thermostat in case supply temperature of hot water was $45^{\circ}C$, flow rate was 1.3 L/min and outdoor air temperature was $7.8^{\circ}C$.