• 전기학회논문지
• /
• 제60권6호
• /
• pp.1103-1111
• /
• 2011

This paper is developed to Energy Balance Flow show the flow of total energy resource be used nationally. The Energy Balance Flow is applicable of demand management factor through the analysis of foreign energy model of supply and demand and energy statistic data in the country. This study is based on and developed to Energy system management model is able to appraisal efficient of energy cost cutting, CO2 emission reduction and Energy saving at the national level calculated effect reached amount of primary energy to change of energy flow followed application of demand side management factor is able to appraisal quantitatively at the total energy to model of demand and supply.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.857-872
• /
• 2014

Recent researches reveal that great benefit can be achieved for data gathering in wireless sensor networks (WSNs) by employing mobile data collectors. In order to balance the energy consumption at sensor nodes and prolong the network lifetime, a multi-track large-scale mobile data collection mechanism (MTDCM) is proposed in this paper. MTDCM is composed of two phases: the Energy-balance Phase and the Data Collection Phase. In this mechanism, the energy-balance trajectories, the sleep-wakeup strategy and the data collection algorithm are determined. Theoretical analysis and performance simulations indicate that MTDCM is an energy efficient mechanism. It has prominent features on balancing the energy consumption and prolonging the network lifetime.

• 한국경영과학회지
• /
• 제35권2호
• /
• pp.53-69
• /
• 2010

This paper proposes an ant-based routing algorithm, Ant System-Routing in wireless Senor Networks(AS-RSN), for wireless sensor networks. Using a transition rule in Ant System, sensors can spread data traffic over the whole network to achieve energy balance, and consequently, maximize the lifetime of sensor networks. The transition rule advances one of the original Ant System by re-defining link cost which is a metric devised to consider energy-sufficiency as well as energy-efficiency. This metric gives rise to the design of the AS-RSN algorithm devised to balance the data traffic of sensor networks in a decentralized manner and consequently prolong the lifetime of the networks. Therefore, AS-RSN is scalable in the number of sensors and also robust to the variations in the dynamics of event generation. We demonstrate the effectiveness of the proposed algorithm by comparing three existing routing algorithms: Direct Communication Approach, Minimum Transmission Energy, and Self-Organized Routing and find that energy balance should be considered to extend lifetime of sensor network and increase robustness of sensor network for diverse event generation patterns.

• 한방비만학회지
• /
• 제3권1호
• /
• pp.95-105
• /
• 2003

The obesity is the matter of the energy balance in essential. The energy balance in human body is energy expenditure subtracted from energy intake. The energy intake is mainly supplied by carbohydrates, proteins and lipids in food, and the energy expenditure is composed of basal metabolic rate or resting energy expenditure, physical activity and thermogenesis including diet-induced thermogenesis. The resting energy expenditure is measured by direct calorimetry and indirect calorimetry. Generally we can simply use predictive equation with the variables of weight, height, age and fat-free mass to yield metabolic rate. But there is discrepancy between the estimate and real metabolic rate because the equations can not reflect individuality and environments. The resting energy expenditure is influenced by many factors but the fundamental factor is fat-free mass. We briefly reviewed the concept and evaluation of the energy balance, intake and expenditure, which are important parts in the study of obesity. Finally, we surveyed the correlation between metabolic rate and obesity and suggested applicable herb medication to increase metabolic rate.

• 한국지반공학회논문집
• /
• 제30권11호
• /
• pp.17-23
• /
• 2014

본 연구는 지표면 에너지 수지 이론을 이용한 도로노면온도예측을 위한 예단 모델을 개발하기 위한 것으로, 개발된 모델은 지표면 에너지 수지를 정확하게 표현함으로서 매우 복잡한 미기상학적 물리 과정을 표현할 수 있다. 모델의 성능을 검증하기 위하여 독일 기상청의 모델과 비교 실험을 하였으며, 독일의 관측자료 그리고 한국 기상청의 도로기상 관측 시스템의 관측자료를 이용하여 비교 검증하였다. 비교 결과 독일의 모델 결과와 매우 유사한 결과를 나타냈으며, 각 관측 자료값들과 잘 일치하였다.

• Journal of Nutrition and Health
• /
• 제24권2호
• /
• pp.132-141
• /
• 1991

The purpose of this study was to choose the assessment method of usual energy in take for epidemiological study. Energy intakes of 30 female college students estimated by frequency questionnaires and energy balance method were compared with that obtained by dietary record. The results are summarized as follows. Assessment of mean energy intakes by dietary record frequency questionnaires energy balance method were 156.2Kcal, 1517Kcal, 1878.0Kcal respectively. There was no significant difference between energy intake by dietary record and that by frequency questionnaire. Frequency questionnaire covers 4 weeks energy intake and it can be substituted for dietary record. Although energy intake by energy balance method was significantly different from that obtained by dietary record it shows high correlation with anthropometric and obesity indices and energy expenditure of the subjects.

• 유기물자원화
• /
• 제29권4호
• /
• pp.77-86
• /
• 2021

본 연구에서는 유기성폐자원에너지 인센티브제도의 기초자료로 활용하고자 음식물폐기물, 음폐수 및 다양한 유기성폐기물이 처리되는 혐기소화조의 운영방식의 물질수지와 에너지수지 산정 결과를 통하여 에너지효율을 평가하고자 한다. 바이오가스화 시설 11개소의 물질수지 분석 결과 유기성폐기물을 제외한 반입물 중 공정수 21.1%, 시상수 25.7 % 다량 투입되는 것을 확인하였다. 그에 따라 연계처리수의 전체 유출물의 87.6 %를 차지하였다. 또한 총 유입물량의 15.7 %가 바이오가스로 전환되며, 총고형물(TS)가 평균 22 %임을 감안할 때 평균 75 %의 물질 전환율을 확인하였다. 에너지수지 분석 결과, 유입물의 잠재에너지 대비 바이오가스 열량을 분석하여 에너지 전환율은 평균 78.5%을 확인하였다. 바이오가스를 생산하기 위한 외부에너지원을 포함한 바이오가스 생산효율은 평균 69.4 %이며, 미이용된 유출에너지를 적용한 바이오가스 플랜트 효율은 평균 58.9 %로 나타났다.

• Smart Structures and Systems
• /
• 제8권4호
• /
• pp.399-412
• /
• 2011

This study compares the performance of two smart isolation systems that utilize superelastic shape memory alloys (SMAs) for seismic protection of bridges using energy balance concepts. The first isolation system is a SMA/rubber-based isolation system (SRB-IS) and consists of a laminated rubber bearing that decouples the superstructure from the bridge piers and a SMA device that provides additional energy dissipation and re-centering capacity. The second isolation system, named as superelastic-friction base isolator (S-FBI), combines the superelastic SMAs with a flat steel-Teflon bearing rather than a laminated rubber bearing. Seismic energy equations of a bridge structure with SMA-based isolation systems are established by absolute and relative energy balance formulations. Nonlinear time history analyses are performed in order to assess the effectiveness of the isolation systems and to compare their performance. The program RSPMatch 2005 is employed to generate spectrum compatible ground motions that are used in time history analyses of the isolated bridge. Results indicate that SRB-IS produces higher seismic input energy, recoverable energy and base shears as compared to the S-FBI system. Also, it is shown that combining superelastic SMAs with a sliding bearing rather than rubber bearing significantly reduce the amount of the required SMA material.

• Earthquakes and Structures
• /
• 제11권1호
• /
• pp.129-140
• /
• 2016

This paper presents He's Energy Balance Method (EBM) for solving nonlinear oscillatory differential equations. Three strong nonlinear cases have been studied analytically. Analytical results of the EBM are compared with numerical solutions using Runge-Kutta's algorithm. The effects of different important parameters on the nonlinear response of the systems are studied. The results show the presented method is potentially to solve high nonlinear vibration equations.

• Journal of Astronomy and Space Sciences
• /
• 제34권3호
• /
• pp.225-235
• /
• 2017

The energy balance in a satellite needs to be designed properly for the satellite to safely operate and carry out successive missions on an orbit. In this study, an analysis program was developed using the MATLAB(R) graphic user interface (GUI) for nanosatellites. This program was used in a simulation to confirm the generated power, consumed power, and battery power in the satellites on the orbit, and its performance was verified with applying different satellite operational modes and units. For data transmission, STK(R)-MATLAB(R) connectivity was used to send the generated power from STK(R) to MATLAB(R) automatically. Moreover, this program is general-purpose; therefore, it can be applied to nanosatellites that have missions or shapes that are different from those of the satellites in this study. This power simulation tool could be used not only to calculate the suitable power budget when developing the power systems, but also to analyze the remaining energy balance in the satellites.